1986 Chevrolet Nova Nummi Based On Toyota Corolla, Low Miles, 2 Owners, Look! :) on 2040-cars
Ypsilanti, Michigan, United States
Body Type:Sedan
Vehicle Title:Clear
Engine:4 cylinder
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 4
Make: Chevrolet
Model: Nova
Trim: Base model 4 dr sedan 1986 NUMMI
Drive Type: FWD
Mileage: 84,604
Disability Equipped: No
Exterior Color: Burgundy
Warranty: Vehicle does NOT have an existing warranty
Interior Color: Gray
Extremely rare and awesome little car! Although it bears little resemblance to the Nova muscle cars of the previous decades, the 1980s Nova was pretty righteous in its own regard. Built at NUMMI, the joint venture between GM and Toyota, this car has more than a little Toyota Corolla in its DNA. In fact, some people even mod them to be a Corolla (not sure how you explain that to the DMV!).
This particular Nova is special. From 1986-2012, it was owned by one man, a lawyer named Terry who didn't drive it much. He maintained it well, and kept all the records. Finally, he was ready to sell it, and in a small miracle, he put on Craigslist right as we desperately needed a car but couldn't use our credit because we were in the middle of buying a house. We bought the car, and loved it. We fixed the rust spots and the little quirks that Terry hadn't know how to fix. We even named it Terry in honor of the first owner. It got us everywhere we needed to go, and got better gas mileage than a Prius. We dreamed of aftermarket embellishments (a targa roof? why not?), and expected many years to come--after all, it only had 80K miles, and no onboard computers to go bad.
Then, one terrible night in late December, Terry died on the highway and had to be towed home (the car, not the lawyer). We've tried everything we can afford to fix him, but it appears only a distributor can bring him back to life. We cannot afford to put more money into him, so we've made the painful choice to sell this cool, rare car. Is there someone out there who loves NUMMI Novas and/or Corollas? Do you need parts, or can you put a little money in to getting this car going again? We think Terry deserves better than the scrapyard. Feel free to ask us any questions.
PS. Terry the car comes with the dossier of receipts and maintenance records from Terry the lawyer.
Chevrolet Nova for Sale
1963 nova ss white w/ blue interior, automatic w/ shifter on the floor(US $12,000.00)
1966 chevrolet chevy ii nova hardtop 2-door 5.3l(US $24,000.00)
1967 nova/chevy ii
1970 chevrolet nova coupe(US $20,000.00)
1972 chevrolet nova "rally nova" 4 speed and all number matching
1974 nova ss clone garage find project roller drag pro street muscle car
Auto Services in Michigan
Van Buren Motor Supply Inc ★★★★★
Van 8 Collision ★★★★★
Upholstery Barn ★★★★★
United Auto & Collision ★★★★★
Tuffy Auto Service Centers ★★★★★
Superior Collision ★★★★★
Auto blog
2016 Chevrolet Camaro First Drive [w/video]
Fri, Oct 16 2015The Autoblog gang was downright stoked to learn the 2016 Chevy Camaro was next on our test-car docket. Then we found out it was the V6 model. Buzzkill. We were hoping for the snorting V8, or at least the spunky new turbo four-cylinder. The V6? Meh. We've been driving V6 Camaros for, like, six years. It's what you buy if you can't afford anything better, or so say horsepower snobs as they wrinkle their noses and cut their coffee with 93 octane. But after a week with the six-pot Camaro, we'll admit it: we were wrong. The all-new 3.6-liter V6 is strong, sounds good, and is damn fun to drive. Its 335 horsepower and 284 pound-feet of torque appear modest by modern standards, but they power the Camaro to 60 miles per hour in 5.1 seconds with the automatic, or in the case of our manual-equipped test car, 5.2 seconds. That's almost half a second quicker than the new turbo four-cylinder model. Yes, it has the same displacement as the old V6. No, it's not the same engine. Upon closer inspection, the V6's potency shouldn't come as a surprise. This engine is from General Motors' newest family of dual-overhead cam powerplants that launched in the Cadillac CTS and ATS. Yes, it has the same displacement as the old V6. No, it's not the same engine. Don't be fooled, and don't underestimate it at stoplights. The strapping V6 is unsuspectingly good, but it's just one of many improvements for the sixth-generation Camaro. Chevy's coupe is lighter, faster, and more modern looking inside and out. It starts with a rear-wheel-drive chassis donated from the Cadillac ATS, though about 70 percent of the components are unique to the Camaro. The 2016 model is about two inches shorter in length (thanks to a shorter wheelbase) and about an inch has been removed from height and width compared to the 2015 model. These lighter underpinnings jumpstarted the Camaro's weight-loss plan, and thanks to extensive use of aluminum, the V6 with the new eight-speed automatic transmission weighs 3,435 pounds – 294 less than its predecessor (the manual-transmission V6 Camaro weighs 3,448 pounds). The V8, meanwhile, sheds 223 pounds. One by one, these elements would merely enhance how the Camaro drives, but taken collectively, they invigorate the new model. It feels much more confident and agile in all circumstances. Put simply, it's a sportier car. View 32 Photos Grab second, let the revs build, and the dual-mode exhaust changes its tune from a low buzz to a rumble, then a growl.
Next-gen Chevy Silverado and GMC Sierra may use carbon fiber
Thu, Dec 7 2017It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck
nuTonomy beats Uber to market with self-driving taxi rides, and the latest Corvette ZR1spy shots | Autoblog Minute
Sat, Aug 27 2016Software developer nuTonomy beats Uber to market with self-driving taxi rides in Singapore. A 124 Coupe could soon join Fiat's roadster lineup, and we have the latest spy shots of the new Corvette ZR!. Senior Editor Greg Migliore reports on this edition of Autoblog Mintue. Senior Editor Greg Migliore reports on this edition of Autoblog Mintue. Show full video transcript text [00:00:00] Massachusetts based software company, nuTonomy, launched its self-driving taxi service in Singapore this week. nuTonomy specializes in developing software for self-driving cars. Testing of the companies ride-hailing smartphone app occurred in Singapore, where riders were able to book a free driverless ride. nuTonomy's robo-taxi fleet is comprised of Renault Zoes and Mitsubishi i-MiEVs. Engineers from nuTonomy were present at this public launch as a safety measure. [00:00:30] The company will now continue to collect data and conduct more testing with its self-driving cars in Singapore, Michigan and the United Kingdom. nuTonomy has plans to offer widely-available commercial service in Singapore in 2018. nuTonomy's aggressive play in Singapore has put Uber and its partner Volvo in the unlikely position of playing catch-up. Autocar reported this week that we should expect FCA to add a Coupe [00:01:00] to it's 124 roadster lineup. When? Well, seeing as the 124 Spider just recently made it US dealers we may have to wait until next year to see a hardtop Fiata. It's tough to predict what kind of performance we can expect out of a 124 Coupe but in the U.S. the Spider has 160hp using a 1.4-l turbocharged engine. So the car you see in these pictures is actually Fiat's 124 Rally car that will be used for competition. [00:01:30] Now that's not exactly how the street car will look but it gives you an idea of what a 124 with a fixed roof is gonna look like. This week we got another look at what we think is the Chevy Corvette ZR1 and its massive rear wing. Now to be clear, the images that we're seeing are actually demonstrations. The car was actually captured without the rear wing. However, our spy photographers photoshopped the wing, which we've seen before, on some of these new shots just so you could get [00:02:00] a sense of what the car looks like driving around in it's most recent state. Now we think this car will make more than 700hp, which is kind of a magic number. The Hellcats from Chrysler make 707 so certainly GM wants to beat them.