1979 Chevrolet Nova Base Coupe 2-door 5.0l on 2040-cars

Auto blog

2015 Chevrolet Corvette Z06

"Corvette" has stood for American muscle, American sports car, and American supercar. In many cases, it still stands for America: liberty on the go, LS-powered freedom. There was also a time when it meant really impressive numbers that didn't equate to really impressive handling, and a not-so-nice cabin. The handling issue really turned the road-legal corner when the C5 Z06 was introduced in 2001, and by the time the super-duper ZR1 ended its run in 2010, Corvette had exorcised practically all of its dynamic demons. But when I took a seat in the 2015 Corvette Z06 on the first day of my week-long loan, I espied a few demons still squatting in the interior. When colleague Seyth Miersma drove the Z06, he wrote, "Listen, I'm not going to be the guy that dogs the Corvette for having a cheap-feeling interior, this generation has put those once-legitimate claims to rest." Well, I am going to be that guy, because I don't think those claims have been put to rest. One day Chevy will give us leather that looks and feels like leather, instead of the astonishingly thin hide that is laid directly on top of the instrument panel structure. This material was set off by white stitching, but there were no seams, just a trail of white stitches. In some places it was hard to tell where the leather ended and the plastic began; or it might all have been the same upholstery, I don't know. Five dollars of foam padding would add five thousand dollars of luxury to the cockpit. One day Corvette will have plastics that don't look so plasticky. I know General Motors can do it. And after years of thinking Corvette seats were too wide and flat, this latest Z06 is almost there. The seatbacks were nice, but the exaggerated side bolstering on the seat bottoms was too narrow and sharp. That's a personal preference, though; other drivers with thinner thighs will think differently. My complaint isn't that the interior isn't luxurious, it's that it's not luxurious enough. If Chevrolet was worried about pricing, it could add some kind of profligate package to the options list. Have some ex-Porsche people design it, call it the Teutonic Splendor Package, slap a massive price on it, and count the money. People will buy it, and no one will ever have to say again, "But the interior..." That said, this test car's cabin had every feature I wanted. The gauge cluster was bright, crisp, and readable in every shade of daylight.

7 major automakers to build open EV charging network

A new joint venture established by BMW, GM, Honda, Hyundai, Kia, Mercedes-Benz and Stellantis will build a new North American electric vehicle charging network on a scale designed to compete with Tesla's industry-benchmark Supercharger network. The 30,000-plus planned new chargers will accommodate both Tesla's almost-standard North American Charging System (NACS) and existing automakers' Combined Charging System (CCS) options, effectively guaranteeing compatibility with the vast majority of current and upcoming electric models — whether they're from one of the involved automakers or not.  "With the generational investments in public charging being implemented on the Federal and State level, the joint venture will leverage public and private funds to accelerate the installation of high-powered charging for customers. The new charging stations will be accessible to all battery-powered electric vehicles from any automaker using Combined Charging System (CCS) or North American Charging Standard (NACS) and are expected to meet or exceed the spirit and requirements of the U.S. National Electric Vehicle Infrastructure (NEVI) program." Critically, the automakers involved will have a say in how the charging tech is implemented, guaranteeing that the hardware will play nicely with each automaker's in-house charging systems. Hyundai and Kia, for example, were hesitant to jump on board the Tesla NACS bandwagon earlier this year over concerns that the Supercharger network is insufficient for powering the two automakers' 800-volt charging systems; similar tech is used by Volkswagen and Porsche.  In addition to providing much-needed capacity and high-output charging for America's growing fleet of electric cars and trucks, the new network will integrate seamlessly with each automaker's in-app and in-vehicle features, rather than forcing customers to use third-party tools and payment systems, as is the case with some existing public charging infrastructure.  "The functions and services of the network will allow for seamless integration with participating automakersÂ’ in-vehicle and in-app experiences, including reservations, intelligent route planning and navigation, payment applications, transparent energy management and more. In addition, the network will leverage Plug & Charge technology to further enhance the customer experience," the announcement said.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.