1964 Chevy Ii Nova 400 Series Wagon 327 Engine With Powerglide From California on 2040-cars

Auto blog

GM extends production cuts, affects Cadillacs, Camaro and Acadia

General Motors is extending production cuts at some of its North America factories due to a chip shortage that has roiled the global automotive industry, the U.S. carmaker said on Thursday. The move's impact has been baked into GM's prior forecast that the shortage could shave up to $2 billion off this year's profit. GM's Lansing Grand River assembly in Michigan will extend its downtime through the week of April 26. The plant makes Chevrolet Camaros and Cadillac CT4 and CT5 sedans. It has been out of action since March 15. GM's Spring Hill assembly in Tennessee will shut down for two weeks starting the week of April 12. The plant makes the Cadillac XT5, XT6 and GMC Acadia. The company said it has not taken downtime or reduced shifts at any of its more profitable full-size truck or full-size SUV plants due to the shortage. The news was first reported by CNBC. Reporting by Ankit Ajmera in Bengaluru; Editing by Maju Samuel and Sriraj Kalluvila

2016 Chevrolet Camaro First Drive [w/video]

The Autoblog gang was downright stoked to learn the 2016 Chevy Camaro was next on our test-car docket. Then we found out it was the V6 model. Buzzkill. We were hoping for the snorting V8, or at least the spunky new turbo four-cylinder. The V6? Meh. We've been driving V6 Camaros for, like, six years. It's what you buy if you can't afford anything better, or so say horsepower snobs as they wrinkle their noses and cut their coffee with 93 octane. But after a week with the six-pot Camaro, we'll admit it: we were wrong. The all-new 3.6-liter V6 is strong, sounds good, and is damn fun to drive. Its 335 horsepower and 284 pound-feet of torque appear modest by modern standards, but they power the Camaro to 60 miles per hour in 5.1 seconds with the automatic, or in the case of our manual-equipped test car, 5.2 seconds. That's almost half a second quicker than the new turbo four-cylinder model. Yes, it has the same displacement as the old V6. No, it's not the same engine. Upon closer inspection, the V6's potency shouldn't come as a surprise. This engine is from General Motors' newest family of dual-overhead cam powerplants that launched in the Cadillac CTS and ATS. Yes, it has the same displacement as the old V6. No, it's not the same engine. Don't be fooled, and don't underestimate it at stoplights. The strapping V6 is unsuspectingly good, but it's just one of many improvements for the sixth-generation Camaro. Chevy's coupe is lighter, faster, and more modern looking inside and out. It starts with a rear-wheel-drive chassis donated from the Cadillac ATS, though about 70 percent of the components are unique to the Camaro. The 2016 model is about two inches shorter in length (thanks to a shorter wheelbase) and about an inch has been removed from height and width compared to the 2015 model. These lighter underpinnings jumpstarted the Camaro's weight-loss plan, and thanks to extensive use of aluminum, the V6 with the new eight-speed automatic transmission weighs 3,435 pounds – 294 less than its predecessor (the manual-transmission V6 Camaro weighs 3,448 pounds). The V8, meanwhile, sheds 223 pounds. One by one, these elements would merely enhance how the Camaro drives, but taken collectively, they invigorate the new model. It feels much more confident and agile in all circumstances. Put simply, it's a sportier car. View 32 Photos Grab second, let the revs build, and the dual-mode exhaust changes its tune from a low buzz to a rumble, then a growl.

Chevy Express, GMC Savanna reportedly ending production for 2025

The oldest commercial vans on the market may only have a few years left, according to a report from Autoweek. The news outlet cited a "competitive analysis source" in saying that the Chevy Express and GMC Savanna commercial vans would be discontinued after the 2025 model year. They would then be replaced by a new electric van, likely Ultium-platform based, for the 2026 model year. We reached out to GM for comment, and this is the official statement sent to us: "We have said in the past that as part of GM’s larger EV acceleration plans that we will add two new vehicles to our commercial portfolio. The first is a full-sized battery electric cargo van and the second is a medium-duty truck that will put both Ultium and our Hydrotec hydrogen fuel cell technology to work. We have not disclosed timing, names or shared any other details, so any articles reporting more are purely speculative." The GM vans are mighty old, having been introduced for the 1996 model year. They've barely changed since then, having received just some facelifts and updated powertrains over the years. And with GM's electrification plans, we're not surprised that these vans will be on the way out. We do have some disagreement about the reported timeline for replacement, though. We suspect that the upcoming electric vans will overlap with the old vans for at least a year. The reason being that there are a lot of these vans on the road, and there are a lot of pieces of equipment that fit them. Box vans, buses and more have components that have been designed for the Express and Savanna. If you're a fleet that has invested in these components, you might not be ready to shift over to a whole new platform. So GM will probably want to give fleet buyers one last opportunity to replace any old vans before committing entirely to a new electric van platform. It will also be interesting to see what kind of market the GM electric vans enter. Ford already has its electric Transit on the way, and Stellantis will be launching the Ram ProMaster electric van next year. Those are both based on existing gas-powered vans. And GM itself has already delivered the first of its larger BrightDrop EV600 electric vans to FedEx. The coming GM vans will likely be new platforms, which could give them performance and range advantages, though the Ford and Stellantis vans will have the advantage of being compatible with equipment for the gas variants.