Car Runs Like A Dream on 2040-cars

Auto blog

GM re-recalls 11k SUVs

General Motors is recalling a bunch of previously recalled SUVs because, well, they still aren't quite fixed. The latest repairs are necessary on 10,974 SUVs in North America, including 9,932 in only the US. Affected models include the 2006-2007 Buick Rainier, Chevrolet Trailblazer, and GMC Envoy; plus the 2006 Trailblazer EXT and Envoy XL. While not listed by NHTSA, a statement by GM to Autoblog says the 2006-2007 Saab 9-7X and Isuzu Ascender are also affected. In these SUVs, it's possible that liquid could get into the driver's door master power window switch module and cause a short circuit. This could potentially lead to a fire, and owners are urged to park the vehicles outside until repaired. GM has been trying to fix this issue for years. It started as an investigation into fires, and that led to a recall for about 250,000 vehicles in cold-weather states. A nationwide campaign came in 2013 for 193,000 of them in the US. Last year, the automaker decided to replace the whole module as a repair. However in a recent investigation of these recalls, GM discovered that this latest group of SUVs never received the new part. According to documents submitted to NHTSA (as a PDF), "Some dealers incorrectly used the labor code associated with module replacement when, instead of replacing the module, they only added a protective coating to the module." To fix things this time, the models finally get the correct component. Related Video: GM Statement General Motors is recalling 9,932 older midsize SUVs in the U.S. because they were mistakenly excluded from an earlier recall. Certain 2006 Chevrolet TrailBlazer EXT and GMC Envoy XL, and 2006-2007 TrailBlazer, Envoy, Buick Rainier, Saab 9-7X and Isuzu Ascender vehicles may continue to have a condition in which the printed circuit board inside the driver's door may corrode and short if exposed to certain fluids such as melted snow containing road salt. GM is aware of four fires but no crashes, injuries or fatalities associated with the expanded recall. The total number of vehicles being recalled, including Canada, Mexico and exports is 10.974. Customers are urged to park these vehicles outside until repairs have been made. GM reported this recall to the NHTSA on September 23.

These are the cars being discontinued for 2024 and beyond

While we get new and updated car models every year, its inevitable that we'll need to say goodbye to some nameplates as well. This time around, it feels like we have confirmation or reports of an unusually large number of vehicles being discontinued in 2024 and the coming years.  We shouldn't be surprised. A large number of automakers are approaching their various target dates for electrification of their fleets. As such, some beloved internal combustion cars are going away, sometimes with appropriate fanfare like special editions. Others are slinking away quietly, killed by slowing sales and changing consumer trends. Of course, the end of production doesn't necessarily mean permanent death. Some of these models could be resurrected in later years ... and probably as an EV. With that in mind, here are the vehicles that are being discontinued in 2024 and beyond.   Alfa Romeo Giulia Quadrifoglio and Stelvio Quadrifoglio Alfa Romeo ended the production of its combustion-only Quadrifoglio models in April 2024 as the Italian automaker moves toward an electrified future. This isn't the end of the Quadrifoglio entirely, though, with Larry Dominique, Alfa Romeo senior vice president and head of North America, writing, "I look forward to presenting the next chapter in the four-leaf clover’s journey."   Chevrolet Camaro GM is ending production of the Chevy Camaro after 2024, but is sending it off in style with a CollectorÂ’s Edition. WouldnÂ’t it be cool, though, if Chevy brought it back as an EV?   Chevrolet Malibu Rumors of its demise have been around for a while, but now itÂ’s official. GM will end production of the Chevy Malibu in November of 2024. The assembly line in Kansas will be retooled to build the replacement for the Chevy Bolt.   Dodge Durango The three-row Durango is slated to be replaced by the Stealth nameplate after 2024. The Durango name could make a comeback later, according to rumors, on a body-on frame SUV based on the Jeep WagoneerÂ’s platform.   Ford Edge This is the last year for the Edge in the U.S., with the final unit rolling off the assembly line in April. On sale since 2007, the Edge topped 100,000 sales in all but three full years of production.   Ford Escape Newly refreshed for the 2023 model year, FordÂ’s popular Escape compact SUV is reportedly taking its leave in 2025 in order to usher in — you guessed it — an EV in its place.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck