2005 Chevrolet Monte Carlo on 2040-cars

Auto blog

2016 Chevy Malibu exhaustively tested with four decades of data

Chevy is preparing to unveil its new Malibu sedan at the upcoming New York Auto Show next month. But when it does, it's not like it will have appeared overnight. The development of any new vehicle – especially one as widely produced by a major automaker as the Malibu – involves rigorous and relentlessly punishing tests. In the Malibu's case, that meant 1.5 million miles of driving from the scorching heat of Arizona in July to the frigid cold of northern Canada in January and everything in between. The Bowtie brand also says it incorporated four decades' worth of data taken from vehicles driving in locations around the world since 1972 in order to make the Malibu the best it could be. We'll have to wait to find out the results of all that exhaustive testing, but you can catch a sneak peek at the new sedan in the video above. Four Decades of Data Used to Test 2016 Chevrolet Malibu Recorded customer use drives durability testing for next-generation midsize sedan 2015-03-11 DETROIT – Data collected over decades from across the globe is helping ensure the 2016 Chevrolet Malibu can handle the world's worst roads even if the all-new midsize sedan never drives on them. Data collection boxes are placed in cars in real-world driving conditions around the world. Since 1972, these devices have accurately recorded the harshness and frequency of every jounce, bump and shudder inflicted on the car on roads in the U.S., Russia, Saudi Arabia and developing markets. "Although most Malibu owners will never put their car through similar abuse, we test all new vehicles in extreme climates, inclement weather and on punishing road surfaces," said Dan Devine, Malibu validation engineer. "The 2016 Malibu is definitely up to these challenges." Tests like these ensured the current generation Malibu was dependable and durable, two qualities that in turn helped Malibu stand out from its rivals in important quality surveys, such as J.D. Power's Initial Quality Study and Vehicle Dependability Study. General Motors engineers analyze the data to calculate the precise amount of damage potholes and other hazards create over 150,000 miles. Then the conditions are replicated at GM's Milford Proving Ground in Michigan on three unique road courses, each riddled with simulated potholes of increasing severity. Engineers run preproduction cars through the course up to hundreds of times.

Cadillac Celestiq, Lyriq, Hummer, other future GM electric cars: Here's everything we saw at ‘EV Day’

WARREN, Mich. — Today, General Motors held an “EV Day” event at its Warren, Michigan, campus to present its new “Ultium” battery technology, modular electric vehicle architecture and soon-to-come electric vehicles. Unfortunately, we were forbidden from bringing cameras into the event, so while we canÂ’t show you what we saw, we can tell you more about it. While we saw the previously teased Cadillac EV (which we now know to be called the Lyriq) and the GMC Hummer pickup teased during the Super Bowl, there were a number of other future cars at the event, which GM President Mark Reuss assured us are all real vehicles in the works. The biggest surprise came at the end of the event, though, in the Cadillac Celestiq electric sedan, which Reuss described as a future flagship that would be hand-built “very locally.” It had been hiding under a dark sheet all morning, with the front and rear illuminated Cadillac emblems shining from underneath. When the wraps came off, we saw a long, white, four-seat fastback sedan. The 23-inch wheels were pushed out to the very corners of the car, giving it what appeared to be a very long wheelbase. The model on the stage had no side mirrors or visible door handles. The grille mirrored that of the Lyriq crossover next to it, with integrated lighting in lieu of the usual mesh or slats youÂ’d see in an internal combustion car. The entire roof, all the way until it tapered to the tail of the vehicle, was tinted glass. In back, vertical tail lighting ran down the C-pillar before turning rearward across the top of the trunk. Inside, everything below the beltline of the windows — essentially all but the headrests and top portion of the steering wheel, was hidden from view. Behind the Celestiq, a large digital display showed a rendering of its interior. The dash consists of a pillar-to-pillar curved LED display serving as both instrument panel and infotainment system. Protruding forward between the front seats was another touchscreen that appeared to house some more controls, with open area, probably for storage, below it. The rear seats had the same sort of touchscreen between them. Built into the back of the front seats were a pair of rear-seat entertainment screens, much like we saw in the Lyriq. The door panels blended wood, metal and animated lighting to give character and a sense of opulence. GM interior design manager Tristan Murphy was on hand to tell us a bit more about the Celestiq.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck