2003 Jeff Gordon Monte Carlo Ss Like New Condition on 2040-cars

Auto blog

Best new convertibles for 2024 and 2025

If you’re here, then youÂ’re already in the right mindset. Convertibles rule, and we have all the best convertibles listed for you further below. Driving around with the top off is an experience you need to live to fall in love with. When the weatherÂ’s right, youÂ’re on a proper bit of road, and the car youÂ’re in is a good one, few automotive experiences can top it. The experience is extra special when you have a musical exhaust note filtering directly into your ears and echoing off the landscape around you. And while rolling the windows down and opening a moonroof can get you part of the way there, it's nothing like feeling the wind wash over you with absolutely no roof overhead. The downsides can be just as harsh as the upsides when youÂ’re in the wrong conditions, though. Convertibles are typically worse to live with in cold climates, and driving around with the top up frequently means you might be subject to more road noise and worse visibility than an equivalent coupe. And when it comes to pure performance, convertibles are inherently compromised from a weight and structural rigidity perspective. All that said, we still think the upsides outweigh the compromises if your number one objective is to simply have fun. ItÂ’s a good thing then that there are a ton of great convertibles for sale these days. And no, the list of possibilities isnÂ’t as long as it used to be. Long-running standbys like the Mercedes-Benz E-Class and C-Class Convertibles are gone (replaced by the one CLE-Class). And so are others like the Audi TT Roadster, Fiat 124 Spider and Nissan Z Roadster. Nevertheless, opportunities abound from the ultra-cheap and fun, to physics-defying supercars and everything else in between. WeÂ’ll give you options for which new convertibles we think are the best below, so read on to find out.   Mazda MX-5 Miata Pros: Lightweight and compact; great engine and transmission combo; one of the most raw and pure driving experiences out thereCons: Not great for tall people; infotainment is dated; tiny trunk Read our Mazda MX-5 Miata Review Miata is always the answer, right? In this case, that rings even more true than usual. In fact, you could stop reading this list right here and go buy a Miata and youÂ’d likely be just as happy driving it around as you would be in any of the more expensive offerings that follow. ThatÂ’s just the magic of the MX-5.

GM invests $175 million in Chevy Camaro factory

General Motors just keeps rolling out portions of its $5.4-billion plan for factory upgrades over the next three years. In the latest announcement, the automotive giant is putting $175 million into the Lansing Grand River Assembly Plant for improvements to build the 2016 Chevrolet Camaro. The investment brings new equipment to the plant to build the pony car. An upgrade is needed to support Camaro-specific colors like Summit White, Bright Yellow, and Red Hot, and the factory is also getting two robotic framers. A second shift of 500 workers is resuming in Lansing later this summer to produce the model, as well. So far, GM has announced allocations for $2.8 billion of the $5.4 billion in upgrades. The investments include $1.2 billion to improve pickup production, $439 million for a paint shop for the Corvette, and more new equipment at other plants too. Lansing Grand River Plant Tools Up for 2016 Camaro $175 million investment enables production of lighter, more powerful model 2015-05-28 LANSING, Mich. – A $175 million investment for new tooling and equipment for the sixth-generation Chevrolet Camaro, and the return of hundreds of workers to build America's best-selling performance car for the last five years, was announced today. The facility improvements include three new paint systems for Camaro-specific colors: Summit White, Bright Yellow, and Red Hot. The investment also includes installation of two robotic framers, which allow better dimensional control to provide a more precise drive experience. The Lansing Grand River Assembly Plant will resume a second shift of 500 jobs in late summer. The all-new Chevrolet Camaro was introduced on Detroit's Belle Isle on May 16. The current generation Camaro has been America's favorite performance car for five consecutive years, attracting both long-term Camaro fans and new buyers to Chevrolet. To improve on that success, the sixth-generation Camaro elevates every aspect of Camaro with a suite of new technologies, even higher levels of performance and fuel economy, and a leaner, more athletic design. "I may be the luckiest mayor in America today," said Lansing Mayor Virg Bernero. "Gearing up for full-scale production of the legendary Chevy Camaro is a new high point in the more than two decades of extraordinary partnership between the City of Lansing, General Motors and the UAW.

GM investing $167m in Spring Hill for new midsize vehicles

General Motors has announced a large investment in its Spring Hill, Tennessee facility. The former home of Saturn production will be getting a $167 million addition to a previously announced $183 million, to cover a pair of new midsize vehicles. The investment is expected to create 1,800 jobs at the factory.
That $350 million is being divvied up for a pair of programs at Spring Hill. The first will take the bulk of the money ($223 million) and create 1,000 of the 1,800 jobs, while the other will take the remaining $127 million and generate the leftover 800 positions. But GM says the investment will cover "midsize vehicle programs." So what could they be?
The leading candidate in our minds is a new crossover for Buick, called the Anthem, that will slot between the Encore and Enclave, but will be slightly smaller than the Equinox and Terrain. As we've explained, the new model will likely be the first product to sport GM's new D2UX platform, which will eventually replace both the Delta and Theta platforms. Spring Hill is already building the Equinox, so there could be some credence to this theory.