2010 Chevrolet Malibu Lt Sedan 4-door 2.4l on 2040-cars

Auto blog

GM follows up Lambda CUV stop-sale with tire recall

In late January, General Motors announced a stop-sale for about 6,281 examples of the 2015 Chevrolet Traverse, GMC Acadia and Buick Enclave because of the possibility for the treads cracking on their 18-inch Goodyear Fortera HL tires. At the time, GM said that this would also eventually lead to a safety campaign to repair the problem, and the National Highway Traffic Safety Administration has just published those details. GM's recall covers 5,876 of the three Lambda platform crossovers to replace their tires. According to NHTSA, if the treads crack, there could be a loss of pressure and possible failure. Goodyear already announced its own recall of the tires after internal testing found small tread cracks. The company did not believe this was safety issue, but the problem did put the rubber out of compliance with federal laws. The business's safety campaign covered an estimated 48,512 tires. Of those, around 32,000 were reportedly made for GM to either be fitted to vehicles or sold as replacements. The remainder went to the aftermarket. Goodyear's portion of the recall is expected to begin around February 20. RECALL Subject : Tire Tread Cracking/FMVSS 110 Report Receipt Date: JAN 28, 2015 NHTSA Campaign Number: 15V044000 Component(s): TIRES Potential Number of Units Affected: 5,876 All Products Associated with this Recall Vehicle Make Model Model Year(s) BUICK ENCLAVE 2015 CHEVROLET TRAVERSE 2015 GMC ACADIA 2015 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Buick Enclave vehicles manufactured December 9, 2014, to January 14, 2015, 2015 Chevrolet Traverse vehicles manufactured December 9, 2014, to January 20, 2015, and 2015 GMC Acadia vehicles manufactured December 9, 2014, to January 16, 2015, and all equipped with Goodyear P255/65R18 Fortera HL tires. These vehicles are equipped with tires that may experience tread cracking. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 110, "Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or Less." CONSEQUENCE: If the tire treads crack, a loss of tire pressure and possible tire failure may result, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will replace the tires that were manufactured within a specific date range, free of charge.

Chevrolet Silverado reportedly getting the GMC Sierra's MultiPro tailgate

GMC reinvented the pickup tailgate when it added a six-way option named MultiPro to the current-generation Sierra it introduced in 2019. It kept this clever feature to itself as a way to differentiate the Sierra from the Chevrolet Silverado, but a recent report claims it will begin sharing it in the not-too-distant future. Enthusiast website GM Authority learned from anonymous sources familiar with Chevrolet's product plans that the Silverado will soon receive its own version of the MultiPro tailgate. It will be called either MultiFlex or Multi-Flex, a name Chevrolet has already trademarked, and it was initially scheduled to make its debut for the 2021 model year. Its arrival might be delayed until the 2022 model year due to the coronavirus pandemic, however. Chevrolet's Silverado and GMC's Sierra are nearly identical under the sheet metal, so adding the latter's six-way tailgate to the former will be a relatively straightforward and cost-effective process. Interestingly, GM Authority wrote engineers could add a seventh function to the tailgate, though it didn't reveal what they have in store. It's also not sure whether both trucks will get the new feature, or if it will exclusively be offered on the Chevrolet. 2022 will bring major updates to the Silverado and the Sierra, potentially including — as we've previously reported — an independent rear suspension. Interior upgrades will allegedly be part of the mid-cycle changes, too, but we still don't know if the Silverado will receive the tough carbon fiber cargo box available in the Sierra. In the meantime, motorists in the market for a Sierra will temporarily have fewer options to choose from. GMC has asked its dealers to stop taking orders for the regular- and double-cab variants of the truck, according to a separate report from GM Authority. Putting the slower-selling regular- and double-cab trucks on hiatus will allow dealers to build up their inventory of crew-cabs, which sell far better and are in relatively short supply. These restrictions will remain in effect until the 2021 model year, which starts on September 14 for double- and crew-cab models and on September 21 for regular-cab trucks. All three body styles will be available in 2021. Related Video:

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging