2014 Chevrolet Impala Limited Ltz on 2040-cars

Auto blog

New recall issued in 2019 Chevy Silverado and GMC Sierra brake software saga

General Motors (GM) has issued a new recall for select 2019 Chevy Silverado 1500 and GMC Sierra 1500 pickup trucks that aims to resolve a faulty fix for a previous recall. According to National Highway Traffic Safety Administration (NHTSA) campaign No. 20V055000, a software update for the Electronic Brake Control Module (EBCM) could cause the electronic brake assist to be disabled.  The NHTSA first launched a recall for 463,995 Silverados, Sierras, and Cadillac CT6es on December 12, 2019 due to a software issue in the electronic brake control module (EBCM) that could disable the electronic stability control (ESC) and anti-lock braking system (ABS). As a response and resolution to that recall, GM began to reprogram the software in affected vehicles. GM later learned that the fix was creating a different problem. The installed software had its own error that was disabling the electronic brake assist. If customers see “Service Brake Assist” or “Service ECS" diagnostic warnings, they should park the vehicle and have it towed to a dealership, GM warns. While GM was going through the process of testing, pinpointing the issue, determining action and working with the NHTSA, safety experts have criticized Chevrolet and GMC for not reacting promptly and appropriately.  According to the recall, 148,055 are now affected, all of which do not meet the standards of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control" and 135, "Light Vehicle Brake Systems." To fix the braking issue, GM will once again reprogram the software. GM began notifying owners of the recall on February 10, 2020. Related Video:

2016 Chevy Malibu exhaustively tested with four decades of data

Chevy is preparing to unveil its new Malibu sedan at the upcoming New York Auto Show next month. But when it does, it's not like it will have appeared overnight. The development of any new vehicle – especially one as widely produced by a major automaker as the Malibu – involves rigorous and relentlessly punishing tests. In the Malibu's case, that meant 1.5 million miles of driving from the scorching heat of Arizona in July to the frigid cold of northern Canada in January and everything in between. The Bowtie brand also says it incorporated four decades' worth of data taken from vehicles driving in locations around the world since 1972 in order to make the Malibu the best it could be. We'll have to wait to find out the results of all that exhaustive testing, but you can catch a sneak peek at the new sedan in the video above. Four Decades of Data Used to Test 2016 Chevrolet Malibu Recorded customer use drives durability testing for next-generation midsize sedan 2015-03-11 DETROIT – Data collected over decades from across the globe is helping ensure the 2016 Chevrolet Malibu can handle the world's worst roads even if the all-new midsize sedan never drives on them. Data collection boxes are placed in cars in real-world driving conditions around the world. Since 1972, these devices have accurately recorded the harshness and frequency of every jounce, bump and shudder inflicted on the car on roads in the U.S., Russia, Saudi Arabia and developing markets. "Although most Malibu owners will never put their car through similar abuse, we test all new vehicles in extreme climates, inclement weather and on punishing road surfaces," said Dan Devine, Malibu validation engineer. "The 2016 Malibu is definitely up to these challenges." Tests like these ensured the current generation Malibu was dependable and durable, two qualities that in turn helped Malibu stand out from its rivals in important quality surveys, such as J.D. Power's Initial Quality Study and Vehicle Dependability Study. General Motors engineers analyze the data to calculate the precise amount of damage potholes and other hazards create over 150,000 miles. Then the conditions are replicated at GM's Milford Proving Ground in Michigan on three unique road courses, each riddled with simulated potholes of increasing severity. Engineers run preproduction cars through the course up to hundreds of times.

A conversation with GM's Mark Reuss on MPG, aluminum and Corvettes

There was plenty to talk about when General Motors hosted its annual mid-December holiday media reception a few months ago. GM had just decided to pull its global Chevrolet brand out of major European markets, where Chevys have competed directly with GM Europe Opel and Vauxhall vehicles, and the US government had sold its last remaining shares of GM stock. But most important was the company's just-reshuffled leadership. Post-bankruptcy CEO Dan Akerson had announced that he would step aside and that 52-year-old Mary Barra would replace him on January 15. Not only would she be the first woman to lead a major automaker, she would also be GM's first engineer CEO since Bob Stempel in the early 1990s. "I look at 2013 and 2014, as the retooling of General Motors" - Mark Reuss Replacing her as executive VP for global product development (and purchasing and supply chain) would be 49-year-old Mark Reuss, who had served a stellar four years as North American president, and elevated to corporate president (from executive VP and CFO) would be 42-year-old Dan Amman. All three are relatively young auto enthusiasts who are liked and respected inside and outside the company, and their collective talents and experience are highly complementary. I've interviewed Barra and found her smart, personable and knowledgeable, though she carefully walks the corporate line in speaking and answering questions. I met and chatted with Ammann for the first time at that holiday reception, and he made a good first impression. But I've known Reuss for some time as a genuinely good guy and a highly capable and inspiring leader, and I believe he is exactly the right person for the global product responsibility once famously held by the outspoken, oft-controversial Bob Lutz. So I jumped at an opportunity to join a group interview of Reuss (with mostly business reporters) at the Detroit Auto Show in January. It was an interesting session of mostly good questions, which he answered with refreshing candor and humor. "I look at 2013 and 2014, as the retooling of General Motors," Reuss said. "We've taken down almost every plant in North America, converted and turned it this last year, and to do that with award-winning vehicles and pretty flawless launches is key. We have to keep the train rolling on great product, because the rest won't happen without the best product, period." A reporter asked whether GM was pushing big trucks, SUVs and Corvettes again because gas is cheap. "No," Reuss said.