2014 Chevrolet Impala 2lz on 2040-cars

Auto blog

2022 Chevy Silverado HD gains Multi-Flex tailgate as an option

GM is spreading the Multi-Pro Tailgate love around its truck lineup, and the Silverado HD is the latest pickup to gain the option. Just like the 2021 Silverado 1500, Chevy uses the “Multi-Flex” name for it in the HD, eschewing GMCÂ’s “Multi-Pro” branding for the bowtie vehicles. YouÂ’ll be able to option the tailgate on 2022 model year Silverado 2500HD and 3500HD models. ItÂ’ll be available optionally in every trim, so thereÂ’s no need to grab a more expensive trim to gain access to the trick tailgate — youÂ’re also not required to take it in higher trims. Functionality is the same as the standard Silverado and Sierra.  The primary gate opens and closes like any other tailgate out there. ThereÂ’s a primary gate load stopper that allows you to put the gate down and still keep things from flying out the back (it can also be arranged such that the load stopper is at a higher height by using the inner gateÂ’s stopper). The inner gate folds down perpendicular to the ground to allow closer access to the bed. A full-width step is available if you fold both “gates” down and pop out the inner panel. And lastly, the inner gate can be lowered to use it as a small work space. You can watch the short video above to get a quick run through of all the positions, or scroll through the gallery at the top of this post. Besides the tailgate, Chevy says the 2022 Silverado HD is gaining a new Greenstone Metallic exterior paint color. Other changes for 2022 were not detailed at this time, but Chevy says the trucks with this tailgate should be available sometime this summer. Related video:

Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]

With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.

1970 Chevy Camaro gets 650-hp crate engine for SEMA

The latest edition of the Chevrolet Performance catalog arrives at the 2015 SEMA Show, and to demonstrate the insane creations that are possible with it, the company has a seriously powerful machine in tow. This custom 1970 Camaro RS boasts the new LT4 crate engine that makes a staggering 650 horsepower and 650 pound-feet of torque. The offering gives hot rod builders the ability to put the Corvette Z06's 6.2-liter supercharged V8 into any project where they can make the mill fit. This Hyper Blue Metallic Camaro should offer neck-snapping performance with its massively powerful engine and a T-56 Super Magnum six-speed manual gearbox. Chevy's show car is about more than just packing copious horsepower into a classic shape, though. The builders also overhaul the suspension with coilovers at the front and rear, in addition to a four-link setup at the back. Behind the 19-inch aluminum wheels, the coupe has Z06-based brakes at both ends. For better visibility, it wears LED headlights and taillights. Plus, the interior gets custom gauges and a six-point roll cage. With pieces like titanium intake valves and forged aluminum pistons, the LT4 crate engine comes ready to offer serious performance, but Chevy also gives builders a few options to fit their application. The mill is available with either wet- or dry-sump lubrication. Depending on the version, there are kits to fit front-end accessories, air conditioning, and power steering, as well. The new Chevy Performance catalog features other high-performance components like Z06-based parts for the standard Stingray and an array of performance upgrades for the 2016 Camaro, including suspension lowering kits, brake upgrades, and more. We look forward to seeing this vast collection of goodies at SEMA this year. Related Video: Classic 1970 Camaro Shows Supercharged LT4 Heart Contemporized muscle car highlights new Corvette Z06-based crate engine LAS VEGAS – Chevrolet Performance is showing off the new LT4 crate engine in the most attractive way possible – under the hood of a classic 1970 Camaro RS. The concept vehicle was introduced today at the SEMA Show, in Las Vegas. As the supercharged 6.2L heart of the Corvette Z06, the LT4 is rated at 650 horsepower and 650 lb-ft of torque, making it the most powerful production-vehicle engine ever from General Motors. The new crate engine – offered in dry-sump and wet-sump versions – allows builders to use the high-tech performance engine in their hot rod projects.