2011 Chevrolet Impala Lt on 2040-cars

Auto blog

2016 Chevy Malibu gets premium looks, hybrid model

The Chevrolet Malibu was once an automotive icon, but its modern reputation is one for underachievement. A new 2016 model seeks to restore the storied nameplate with improved styling, more interior room and a new hybrid version. It debuts Wednesday at the New York Auto Show. Put simply, "the goal was to put Chevrolet back in the midsize car segment," said John Cafaro, the brand's executive director of car design. In a crowded arena with 2.2 million sales up for grabs annually, Chevy has not been a player. Last year, the brand sold 188,519 Malibus, a six-percent decline from 2013, and fewer than half the number of Toyota Camrys and Honda Accords sold. Despite awards from J.D. Power and Associates and the Insurance Institute for Highway Safety, Chevy knew the Malibu needed a big change. New Skin, Lighter Bones The redesign has been in the works for at least three years. Although the Malibu is still based on GM's Epsilon 2 platform, the underpinnings are more derivative of the Impala than the outgoing model. The body structure makes greater use of high-strength steel, which helps reduce weight by 300 pounds. Size is more Impala-like as well, with 2.3 inches more overall length and a 3.6-inch wheelbase stretch contributing to greater interior space. A new skin covers the Malibu's lighter bones, and design language from the Impala gives its sibling sedan a fresher, more upscale appearance. To execute this premium appearance, Chevy turned to 25-year-old designer Jaymer Starbody, a four-year General Motors veteran and graduate from Detroit's College for Creative Studies. He described the new Malibu as having a "wheel-oriented" design, and the car looks poised to pounce from certain angles. Though the 2016 Malibu is the same width as before, designers stretched the creases and angles in the sheetmetal to create a flatter, sleeker appearance. The hood and cowl are lower, and the Malibu's face sparkles with LED running lamps on the top trim levels. Inside, the roomier cabin has a new center stack, satin chrome accents on the interior panel and a console storage area designed for mobile devices. Chevy MyLink with a seven-inch color touchscreen is standard on lower trims, and the top model upgrades to an eight-inch screen. Perforated leather seats and ambient lighting are also available options. The cabin was designed to look high-tech, but still remain easy to use, according to Chevy interior design director Crystal Windham.

GM's Ultium EV platform finally shows up in Q3 sales numbers

General Motors has heralded its Ultium battery-electric platform as the future of its passenger car and truck lineup, but for the first two years of its existence, its impact on the marketplace has been virtually nonexistent. Well, that finally changed in the third quarter of 2023, and while the cars based on this architecture don't represent anywhere near the volume of GM's broader combustion portfolio, we're reaching a point where Ultium products are finally in view (and in the hands) of real-world shoppers. At this point, five U.S.-market Ultium models are in production: the GMC Hummer EV, Cadillac Lyriq, Chevrolet Blazer & Silverado EV, and BrightDrop Zevo 600. If you're not familiar with that last one, that's OK; it's a commercial product that you likely won't see on the road for some time. Together, these four combined for 4,257 sales in the third quarter alone — up from 2,663 for the entire first half of the year. While that may not seem like a significant uptick when viewed from altitude, the quarter-to-quarter numbers paint a clearer picture.  Let's toss out the stragglers first. The Chevy Blazer EV, and Silverado EV for example, are barely in production. GM delivered 19 Blazers and 18 Silverados in the third quarter and that's the entirety of their production runs so far. Likewise, GM's BrightDrop Zevo 600 delivery van effectively exists apart from the consumer marketplace, so its contribution of just 35 units can be set aside too. That leaves us the two you've heard of: the GMC Hummer EV and Cadillac Lyriq — models with high sticker prices and long reservation queues.  Through the second quarter (remember, we're talking six months here), GMC sold 49 Hummer EVs. No typo. In the three months that made up the third quarter, GM moved 1,167 of them. Not only is that a dramatic improvement over the first half, but it's more Hummers than GMC sold in the entirety of 2022 (854). Lyriq's improvement was less eye-popping on paper, but after moving just 122 total units in 2022 and 2,013 of them in the first half of 2023, Cadillac managed to up that figure to 3,018 units in the third quarter alone.  GM is betting its short-term EV future on the Ultium platform, so these trends need to continue if that's going to be a profitable wager.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging