1994 Chevy Impala Ss Black The Only Color Made That Yr Very Low Production Great on 2040-cars

Auto blog

Next-generation GMC Canyon, Chevy Colorado spied together

With the debut of the next-generation GMC Canyon coming in a couple of months (in off-road-ready AT4 guise no less), it's no surprise that both it and the Chevy Colorado are out testing without the heavy coverings of early prototypes. One of our spy photographers caught examples of both trucks with close-fitting vinyl wraps. This gives us a great opportunity to see each pickup more clearly, but also to compare and contrast the designs. From the front, the GMC features a narrower, but seemingly taller grille. At the top are slender lamps. They seem to be daytime running lights, though, and below them are much larger units that will function as the actual headlights. The prototype shown seems to be one of the AT4 variants, based on the lack of a lower air dam and the opened up corners of each bumper. Small fog lights show up in the lower bumper, too. As for the Chevy, its grille is wider, and it blends into the headlights. The lights are at the top of the grille, and they seem to incorporate the actual headlights, not just running lamps. The grille mesh has some interesting detailing, and there are auxiliary lights below the main headlights. This one seems to be a more mainstream Colorado model since it still has a front air dam, possibly a Z71 model, considering the chunky tires. Not surprisingly, the two trucks are very similar from the sides and the rear. They have cabins that look lower, longer and more squared-off than the current models. The fenders look more punched out and aggressive, too. The main differentiator between the Chevy and GMC are the wheel openings. The GMC has sharp corners and the Chevy has more rounded ones, as is the case with the full-size trucks. As previously mentioned, the GMC Canyon AT4 will be revealed this summer, so likely in just a month or two. The Colorado will likely be revealed this summer, too. It's expected that it will use the turbocharged 2.7-liter four-cylinder shared with the Silverado. Naturally, it will be available with two- and four-wheel drive and a variety of trim levels including the AT4 and ZR2 off-road versions. Related video:

Chevy Express, GMC Savanna reportedly ending production for 2025

The oldest commercial vans on the market may only have a few years left, according to a report from Autoweek. The news outlet cited a "competitive analysis source" in saying that the Chevy Express and GMC Savanna commercial vans would be discontinued after the 2025 model year. They would then be replaced by a new electric van, likely Ultium-platform based, for the 2026 model year. We reached out to GM for comment, and this is the official statement sent to us: "We have said in the past that as part of GM’s larger EV acceleration plans that we will add two new vehicles to our commercial portfolio. The first is a full-sized battery electric cargo van and the second is a medium-duty truck that will put both Ultium and our Hydrotec hydrogen fuel cell technology to work. We have not disclosed timing, names or shared any other details, so any articles reporting more are purely speculative." The GM vans are mighty old, having been introduced for the 1996 model year. They've barely changed since then, having received just some facelifts and updated powertrains over the years. And with GM's electrification plans, we're not surprised that these vans will be on the way out. We do have some disagreement about the reported timeline for replacement, though. We suspect that the upcoming electric vans will overlap with the old vans for at least a year. The reason being that there are a lot of these vans on the road, and there are a lot of pieces of equipment that fit them. Box vans, buses and more have components that have been designed for the Express and Savanna. If you're a fleet that has invested in these components, you might not be ready to shift over to a whole new platform. So GM will probably want to give fleet buyers one last opportunity to replace any old vans before committing entirely to a new electric van platform. It will also be interesting to see what kind of market the GM electric vans enter. Ford already has its electric Transit on the way, and Stellantis will be launching the Ram ProMaster electric van next year. Those are both based on existing gas-powered vans. And GM itself has already delivered the first of its larger BrightDrop EV600 electric vans to FedEx. The coming GM vans will likely be new platforms, which could give them performance and range advantages, though the Ford and Stellantis vans will have the advantage of being compatible with equipment for the gas variants.

2017 Honda Ridgeline enters the landscape block war

In the test of pickup truck beds, if steel is apples and aluminum is oranges, Honda wants you to know that composites are pineapples. Chevy recently performed a test in which its own Silverado was pitted against its most obvious competitor, the Ford F-150. A loader dropped over 800 pounds of landscaping blocks into the two truck beds, and Ford's aluminum bed ended up with more damage than Chevy's steel bed. Check that test out right here. Honda apparently wasn't content to let Chevy throw stones alone. In a new test, the Japanese automaker replicated the block-drop test using its brand-new Ridgeline truck, which features a composite bed. As you'll see in the video above, there was very little damage to the high-strength plastic bed of the Ridgeline after a similar load of landscaping blocks were dropped from a loader. Without being on hand at any of these tests, we can't say with any degree of certainty that they match up in severity. But they all look pretty similar, and this is actually a test that Honda performed in front of journalists ( ourselves included) earlier this year. We visually inspected the composite bed of a Ridgeline after a demonstration just like the one on video above, and can confirm that there was basically no damage to Honda's truck. Chevy went an extra step by flinging a heavy toolbox into the Silverado and F-150; Honda didn't match that particular test. Does any of this matter? That's up to truck buyers and owners to decide, naturally, but we doubt anyone would actually dump a load like this into their own truck. And it's also worth noting that a heavy-duty spray-on bedliner would probably minimize damage to the metal surface below, whether steel or aluminum. If nothing else, it's memorable marketing. Related Video: