1963 Chevrolet Impala Ss Convertible 327/300 Hp on 2040-cars

Auto blog

New Chevy Small Block crate engine has 405 hp, endless possibilities

With decades of history, the Chevrolet Small Block V8 has definitely stood the test of time, and the company has kept finding ways to make it better. At this year's SEMA Show in November, Chevy Performance is unveiling the latest upgrade to that legacy with the new ZZ6 350-cubic-inch (5.7-liter) crate engine. Offering 405 horsepower and 405 pound-feet of torque, the mill should add a big dose of power to any project car. For the ZZ6, Chevy is working to improve the Small Block's high-rpm performance. To make that happen, the engine has Fast Burn aluminum cylinder heads and an updated valvetrain inspired by the LS family of powerplants. Large intake runners help with the airflow, and the valve springs use a tapered design that allows for less reciprocating mass. The mill also packs a forged steel crankshaft and high-silicon aluminum pistons inside of a cast iron block. Chevy is offering the engine in two versions depending on what the builder needs. The Base configuration comes with an intake, distributor, water pump, and a few other parts but lacks carburetor and accessories. Conversely, the Turn Key option has everything, including the carb, air cleaner, starter, alternator, and more. More details about their availability will be announced at SEMA. NEW ZZ6 CHEVY SMALL BLOCK ADVANCES CRATE ENGINE LEGACY Revised Fast Burn heads with LS-inspired valvetrain enhance high-rpm performance 2015-10-02 DETROIT – Developed with contemporary technologies, including a high-rpm valvetrain, Chevrolet Performance's new ZZ6 crate engine offers builders a modern twist on the classic Chevy Small Block 350. It uses updated Fast Burn cylinder heads with beehive-style valve springs inspired by the LS engine family – a feature that enhances high-rpm capability, enabling the new high-performance engine to achieve 405 horsepower and 405 lb-ft of torque. That's more power than any factory produced 350 engine ever installed in a Chevrolet production vehicle and it's one of the most powerful 350 Small Block-based crate engines in the nearly 27-year history of the "ZZ" lineup. "The new ZZ6 is the ultimate ZZ 350-based crate engine from Chevrolet Performance," said Jim Campbell, GM U.S. vice president of Performance Vehicles and Motorsports.

New Takata problem results in recall of 414 GM vehicles

An airbag-inflator rupture discovered by Takata during testing has resulted in a new recall affecting 414 vehicles from General Motors, including 395 of them in the US. This latest campaign covers 2015 model-year examples of the Buick LaCrosse, Cadillac XTS, Chevrolet Camaro, Equinox, Malibu, and GMC Terrain. There are no reported breaks in any of these vehicles on the road, and the company estimates only one percent of them actually have the faulty parts. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), one side-airbag inflator failed a cold test at -40 Fahrenheit "releasing high pressure gas and propelling the separated components apart." The supplier told GM about the failure the next day. In these vehicles, the safety device might not only burst but the bag could inflate incorrectly, as well. GM and Takata say that a cause is not yet known, but they are "conducting an investigation." GM will begin notifying affected owners via overnight mail on Oct. 19. Dealers will replace the side airbag modules on all of the affected vehicles with new components outside of the suspect lot. All of the removed parts will also be collected for further study. Takata's faulty front airbag inflators have resulted in a serious scandal for the supplier. Initial figures indicated 34 million US vehicles are need of repair, though more recent figures have knocked that down to 23.4 million bad parts in 19.2 million automobiles. GM was already among the dozen automakers with models to fix, and some of its pickups were affected, along with the Saab 9-2X and Pontiac Vibe. GM Statement: General Motors is recalling 395 cars and crossovers in the U.S. because one of the front seat side air bags inflators may be defective. In the event of a deployment, the air bag's inflator may rupture and the air bag may not properly inflate. The rupture could cause metal fragments to strike the vehicle occupants, potentially resulting in serious injury or death. GM is unaware of any incidents involving vehicles with these components, which were part of a lot in which one inflator failed acceptance testing at the supplier. Dealers will replace the side air bag module or modules in affected vehicles. Including Canada, Mexico and exports, the total population of the recall is 414, GM estimates 1 percent of the recalled vehicles may have the defect.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging