1962 Cheverolet Impala Sport Sedan No Post Solid Surviver Grandpas Car on 2040-cars

Auto blog

eBay Find of the Day: 1990 Chevy 1500 454 SS with just 7 miles

When trawling the classifieds either on a buying mission or merely a time-wasting mission, we spend a lot of time poring over photographs comparing the seller's idea of "Like New!" with our idea of it. It's hard to argue with seven original miles on the odometer, though, which is what this 1990 Chevrolet 1500 454 SS has. It's being sold by Country Chevrolet on eBay, the same dealer who sold the truck to its one and only owner 25 years ago. The purchaser bought two of them and left this one in a garage under a car cover, said garage being less than seven miles away from the showroom floor. Better yet, you can buy with confidence because the seller "has collected all records," which we expect would be the slimmest manilla folder in the history of receipt-keeping. For those unfamiliar, the 454 SS was a half-ton, regular cab, 2WD pickup powered by a 454 cubic inch (7.4-liter) V8 with 230 horsepower and 385 pound-feet of torque shifting through a three-speed transmission. This was at the same time the Chevrolet Corvette used a 5.7-liter V8 producing 250 hp and 350 lb-ft. The pickup rode on exclusive wheels and only came in black with red cloth inside. The only extra-cost option on this example is an $18 locking fuel filler cap, which, according to the 454ss forum, means it should have cost about $18,460 out the door, the equivalent of about $34,000 today. At the time of writing there are zero bids, but proceedings open at $45,000 and Country Chevrolet wants $49,000 if you have to have your time capsule right now.

This is what a 2017 Chevy Camaro Z28 could look like

The latest Camaro Z28, the enthusiast darling of the somewhat frumpy fifth-generation pony car, only hit the scene in 2014. It housed the wonderful 7.0-liter, naturally-aspirated LS7 small block V8 and featured a ton of aero bits. The trickest pieces may have been the dynamic spool valve shocks, legitimately race tech for the road. So with the new Camaro out in the wild, we were wondering what a new Z28 might look like, and thus, commissioned these renders based on our best guesses as to what a future Z28 might be. Since Chevy didn't stray too far from the Zeta-chassis Camaro formula with its new Alpha-based car, our vision of a new 2017 Camaro Z28 likewise is a sequel rather than a reboot. The exterior styling and aero details are similar, but sleeker. The defining and protruding front splitter is back, but it's smoothed slightly and better integrated. It shares quad exhaust pipes with the lowlier SS, but they're of the beveled Z06 variety, and sized up to a howitzer caliber. Instead of a weak faux rear fender vent, our version gains a real brake cooling duct. Some iconic elements, like the hood extractor vent and the large decklid spoiler, remain. What we can't see, we have to speculate on. As the track-focused, hardcore pony car in the Camaro lineup, the Z28 will have to do battle with the Ford Shelby Mustang GT350R. There's simply no avoiding it. And whereas Ford distinguished that car with a 5.2-liter, 526-horsepower, flat-plane-crank V8, Chevy is likely to look to the parts bin to find motivation. This isn't a knock; the LS and LT-series small block V8s are both numerous and power-dense. And there's one engine that seems to do the trick: the LSA, last seen in the old CTS-V and still on sale in the Camaro ZL1 (and of course, still being produced as a crate engine). In ZL1 form, the LSA makes about 580 hp, which is a nice margin over the GT350R. It's also a high-zoot but not top-of-the-line mill, having been mostly superseded by the 650-hp LT4. That puts our probable Z28 far enough behind the new CTS-V and current Corvette Z06 in the pecking order to be a safe bet, without hobbling it with the LT1 shared with the Camaro SS and regular Corvette. Will those trick spool-valve shocks from Multimatic make it to the Z28 again? Ford is taking the GT350R very seriously, and if the expensive but supremely capable suspension system is required to manhandle the Shelby at the track, you can bet that Chevy will pony up for it.

1972 Dodge Challenger on an M1009 CUCV military frame is YES

The subject of this post is cause for celebration, not reason to ask "But why?" We don't know why this random Craigslist seller chose to marry the body of a 1972 Dodge Challenger with the frame and axles from a 1987 Chevrolet M1009 military vehicle. We're here to appreciate it, thanks to The Drive, and maybe spend some time after dinner considering whether to buy it. Now that we're on the same page, an owner in Tucson wants to rid his garage — or his Bullet Farm — of what appears to be an exceptionally well built conversion. Starting from the bottom, the M1009 CUCV, for Commercial Utility Cargo Vehicle or "Cuckvee," emerged from a program turning K5 Blazers into supply rigs that were meant to support hardcore hardware like the AM General Humvee. The M1009 got GM's 6.2-liter Detroit Diesel V8, a TH400 transmission, an NP-208 chain-driven transfer case, a 10-bolt rear axle and 3.08 gears. Produced from 1983 to 1987, they returned "less than desirable" results in the field and the military unloaded them. Not much of that remains for this build. The diesel got dropped, replaced by a 5.7-liter GM gasser with a four-barrel carb and long-tube headers, shifting though a 4L80E automatic transmission attached to a U.S. Shift Quick 1 transmission controller in the cabin. The seller doesn't mention output, but if it's a more recent Chevy 350 then it'll certainly provide a healthy bump over the maximum 160 horsepower from the diesel, especially running through a custom Flowmaster dual exhaust. An NP-205 two-speed transfer case switches between 2H, 4L, and 4H. The Dana 44 front and Dana 60 rear axles feature lockers and 3.52 gearing in back. Skyjacker Black Max provides the suspension to keep the 37-inch BFG KM2 on the pavement or the dirt. About 11,000 miles ago the owner rebuilt and upgraded the drivetrain, installing new accessories like a high-rise intake, four-core radiator, new alternator and Holley fuel pump. Losing the K5 body for an E-body Challenger cap means losing M1009 features like the rifle rack and gas can mounts. But you gain style, something real hard to find on a vehicle stout enough to back you up when you tell the crew, "I've been to hell and I'm going back." As part of that rebuild a few miles back, the minimalist interior got all new panels, dash and custom gauges, headliner, seats, and a Sony audio system with Alpine amps, a sub, and Kenwood speakers.