on 2040-cars

Auto blog

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.

Chevy rolls out Corvette Z06 C7.R Edition at SEMA

It's not just concept vehicles that Chevy is showcasing at SEMA this year. The Bowtie brand is also taking the occasion of the tuner expo to reveal the new Corvette Z06 C7.R Edition. The special edition of the flagship performance model pays tribute to the racing model with a series of special touches and upgrades. The C7.R edition is based on the Z06 in 3LZ trim, and comes equipped with the Z07 Performance Package, including Brembo carbon-ceramic brakes and Michelin Pilot Sport Cup 2 tires. But that's not the end of the story. It also includes special graphics, yellow brake calipers, yellow-striped black wheels, a carbon ground effects package, carbon hood section, metallic gray grilles and vents, and a black leather interior with sueded microfiber trim, Competition Sports seats, and yellow stitching. Buyers will be able to order theirs in black or yellow and in either coupe or convertible body-styles. Only 650 examples will be made, of which 500 will remain in the United States, and each of them is individually numbered starting with the VIN 700001. Of course, being based on the Z06 we already know, it packs a 6.2-liter supercharged V8 engine good for 650 horsepower and an equal measure of torque. With the Z06 pack, that translates to a 0-60 time of under 3 seconds for the automatic version and 3.2 for the manual. Related Video: Corvette Z06 C7.R Edition Pays Tribute to Racing Legacy Distinctive appearance package complements capability with special-edition style LAS VEGAS – When the Z06 rejoined the Corvette lineup in 2015 as the most capable model in the car's long, storied history, it also joined an elite fraternity of the world's most capable supercars – with performance proven on the track, including winning Car and Driver's 2015 Lightning Lap evaluation. The Corvette Z06's capability is derived in no small part from technology and experience leveraged from the championship Corvette Racing program. That connection is celebrated with the 2016 C7.R Edition. It's offered in Corvette Racing's signature yellow livery – or black – with coordinated exterior and interior accents. Only 650 will be built (500 for the U.S. market), all with the Z07 Performance Package with carbon ceramic brakes, and a specially serialized vehicle identification number.

GM's labor deal with UAW union on verge of ratification

Nov 15 (Reuters) - General Motors' tentative labor deal with the United Auto Workers (UAW) union closed in on ratification as the votes were counted on Wednesday. Following the approval earlier in the day by more than 60% of union members at the Detroit automaker's large Arlington, Texas, assembly plant, additional votes in favor have the deal close to clinching majority approval. The number of union locals, most of which are smaller, still to report vote totals is not large. After several large assembly plants voted against the deal earlier on Wednesday, some media had reported the deal was heading toward failure. But Arlington's support, followed by strong voting in favor by smaller warehouse and parts facilities, has put the deal on the brink of approval. This would mark the first ratification of a deal, which runs through April 2028, with one of the Detroit Three automakers. Ford and Stellantis voting is still under way, and workers at both companies were favoring ratification by comfortable margins. The UAW's GM vote tracking site currently shows approval of the contract leading by a 54% to 46% margin with almost 32,000 workers having cast votes out of about 46,000 UAW-represented GM workers. The Arlington plant, with about 5,000 UAW members, has the most of any GM plant. Voting officially ends on Thursday at 4 p.m. EST, although most votes will be cast on Wednesday. The UAW went on strike for more than six weeks against the Detroit Three, seeking better wages, working conditions and cost-of-living adjustments. All three companies agreed to tentative agreements about two weeks ago. Workers at other GM assembly plants voted against the deal, including 60% of workers at its Fort Wayne, Indiana, truck plant, 53% at its Wentzville, Missouri, plant, 58% of workers at GM's Lansing Grand River plant and 61% of workers at the Lansing Delta Township plant. Seven of GM's 11 assembly plants rejected the deal. In addition to Arlington, workers at plants in Detroit, Fairfax, Kansas; and Lake Orion, Michigan; approved the agreement. Only nine facilities are still listed without vote totals on the UAW vote tracker, including GM's Lockport, New York, components plant with about 1,200 members. Those voting in favor of the agreement have a lead of almost 2,500 and many of the facilities still to come include workers who stand to receive large pay increases upon ratification.