Turbocharged Hhr Ss - 1 Owner - Low Miles -*accident Free Carfax Report* - Turbo on 2040-cars

Auto blog

GM drops diesel engines for 2020 Chevy Equinox and GMC Terrain crossovers

GM is officially discontinuing the diesel engine in the Chevy Equinox and GMC Terrain for the 2020 model year. The 1.6-liter turbodiesel was always an oddball of an engine in the compact crossover segment, and now the experiment has come to an end. The Car Connection initially reported the news, and a GMC spokesperson, Stuart Fowle, confirmed it to us this morning.  “A huge majority of our Terrain customers have opted for one of our two gas engines," says Fowle. We canÂ’t say this eventuality comes as a massive surprise, as we saw news from couple of months ago that GM was dropping all-wheel drive from the diesel-powered cars for 2020. Low demand was cited as the reason for that cull, and itÂ’s the same for the little GM crossovers this time around, too. These vehicles were the only ones powered with a diesel engine in their class, but thatÂ’s going to be changing. Just as GM is going away from the diesel, Mazda is finally bringing its diesel to market in the CX-5. YouÂ’ll only be able to get that engine in the most expensive ($42,045) trim level, combined with all-wheel drive, though. The cheapest Equinox diesel starts at a comparably low $30,795. ThatÂ’s a $2,400 upcharge over the base 1.5-liter turbo four-cylinder, and the value is questionable. Mileage is better, but diesel fuel is more expensive. Towing capability didnÂ’t increase over the base engineÂ’s 1,500-pound capacity, but the extra torque around town was nice. As diesels go in the U.S., this one was rather rough and noisy, possibly contributing to some turning their noses up after a test drive. Perhaps another reason for its demise was that the much quicker 2.0-liter turbo Equinox was only $100 more than the diesel. This engine offered significantly better towing at 3,500 pounds, too. You can read all about what we thought of the diesel in our first drive review here, but the 2019 model year is the last one if you had it on your shortlist. This article has been updated to indicate the source.

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video:

2016 Chevy Camaro to drop 200 pounds

The sixth-generation Chevrolet Camaro makes its grand debut on May 16 at a big celebration on Detroit's Belle Isle. Until then, Chevy's strategy seems to be showing off the pony car's new components piece by piece. With the exhaust headers and front end already on display, the Bowtie is now giving a glimpse at some of the upcoming model's aluminum components. The Camaro is going on a diet for its latest generation, and Chevy claims that the switch to the Alpha platform and other new components shed over 200 pounds compared to the current model. That will put the pony car at around 3,500 pounds. The lower weight will contributes to better fuel economy, quicker acceleration and more direct handling, according to the automaker. Among the changes are aluminum front and rear suspension assemblies (pictured above) that weigh 21 percent less than the current units. Also, Chevy promises in its announcement "links on some models feature an intricate, structurally optimized design made with a rigid composite material that's even lighter than aluminum." In addition to these improved parts, the Camaro uses the lightweight metal for the beam that supports the instrument panel to save 9.7 pounds more. The only two pieces reportedly carrying over to the latest design are Chevy's bowtie and SS badges, and at least one engine in the range is known to be a version of the 6.2-liter LT1 V8. With over a month until the next Camaro's debut, we might get a glimpse of even more of the car's new parts in the coming weeks. Related Video: 2016 Camaro Does More with Less New model is at least 200 pounds lighter than current car 2015-03-30 DETROIT – For the all-new, 2016 Chevrolet Camaro, the team was challenged to improve the handling, acceleration and fuel economy of the award-winning current model. To meet all three objectives, the team focused on a singular mission: reduce mass. By obsessively searching for opportunities to save ounces, the team pared more than 200 pounds off the Camaro compared with the fifth-generation model. As a result, the Camaro does more with less, according to Al Oppenheiser, Camaro chief engineer: "We kept the cornering confidence and control that make the Gen 5 Camaro 1LE so fun to drive, and added a greater sense of agility," he said. "The new Camaro brakes harder, flicks into corners more quickly, and drives out of the corner faster.