2010 Chevrolet Hhr Lt on 2040-cars

Auto blog

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

Corvette Stingray gets optional Z06 components

If you've got a Corvette Stingray in the garage and have been tempted by some of the upgrades incorporated into the Z06, but can't quite bring yourself to trade up, Chevy has got some good news for you. The Bowtie brand has announced a series of performance parts derived from those in the Z06, but applicable to the base Stingray. The list of parts includes new cooling elements, prop shafts, brakes, suspension components, and underbody braces. They can all be fitted to Stingray models with or without the Z51 performance kit, and promise to raise the Corvette's game if not quite to Z06 levels, then closer to them. And for Z06 owners interested in gaining a bit more advantage, Chevy is offering a new Level 3 aero kit as well. The parts were demonstrated on upgraded 'Vettes at the Ron Fellows driving school at Spring Mountain. The school is also serving as technical partner and the track as the location for a new spec racing series built around the C7 Corvette. Dubbed the Michelin Corvette Challenge, the calendar is composed of fifteen half-hour races held in pairs over eight weekends, all on the six-mile circuit near Las Vegas. The cars to be used in the series will be close to showroom stock and feature many of the new Z06-derived upgrades, with Michelin racing slicks for dry weather and Pilot Super Sport tires in the wet. Perhaps most compelling of all will be the payment plan that will allow participating amateur racers to pay in installments across the season and take home their Corvette after the season's conclusion in December. New Z06 Parts Enhance Corvette Stingray Performance Broad range of chassis, suspension and aero components enhance capability 2015-11-02 PAHRUMP, Nev. – Chevrolet today and drivers from the Ron Fellows Corvette high-performance driving school at the Spring Mountain track demonstrated Stingray models enhanced with components from a new lineup of Z06-based performance parts. They're designed for 2014+ Stingray models, including Z51-equipped cars. "We've selected specific components from the Corvette Z06 and engineered them to fit the award-winning Stingray," said Jim Campbell, Chevrolet U.S. vice president of Performance Vehicles and Motorsports. "These Z06 parts enhance the handling, braking, cooling and downforce performance of the Stingray." Ron Fellows, champion Corvette Racing driver, collaborated with Chevrolet Performance engineers on the all-new portfolio.

Driving the 2021 Chevy Tahoe and big news from Hyundai | Autoblog Podcast #640

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by News Editor Joel Stocksdale. They discuss some of the big trucks Joel drove: the 2021 Chevy Tahoe and a Mil-Spec-modified Ford F-150. After that is a look at the latest car news including Trofeo versions of Maserati's sedans, Hyundai's new electric brand called Ioniq, and the BMW M3 Touring station wagon and Hyundai Elantra N-Line. They wrap things up with some musings on anniversary of the 19th Amendment to the Constitution and how cars played a role in it. Autoblog Podcast #640 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Reviews2021 Chevy Tahoe Mil-Spec Ford F-150 Maserati Ghibli and Quattroporte Trofeo models revealed Ioniq becomes EV brand for Hyundai 2021 Hyundai Elantra N Line revealed BMW finally announces an M3 station wagon The 19th Amendment and how cars fit in Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video: Government/Legal Green Podcasts BMW Chevrolet Ford Hyundai Maserati