2008 Chevrolet Hhr Ls Wagon 4-door 2.2l on 2040-cars

Auto blog

Six-week production shutdown planned for 2016 Chevy Volt

It's no surprise that GM is winding down production of the first-gen Chevy Volt as it prepares to start building the second-gen for a launch in the second half of this year, but for now, things are proceeding as planned, according to Chevrolet spokesperson Michelle Malcho. Malcho told AutoblogGreen that GM "is still making first generation Volt" and that there has been no announcement about when that will change. The only details she would divulge is that, "It will be this summer." "Halting Chevrolet Volt production in anticipation of the all-new 2016 model year is a smart move for GM," Akshay Anand, an analyst at Kelley Blue Book's KBB.com, said in a statement. "[The move] allows for less inventory and incentives on the outgoing model. Hybrid and alternative fuel vehicle sales have been declining for some time now, with gas prices well below the summer prices of 2014." Volt production will cease in the weeks before the traditional two-week auto plant shutdown over the July 4 holiday. A high inventory of Volts is a factor in the production cuts, but not the only one, Malcho said. The plant construction, engineering changes and pre-production plans for the new Volt and CT6 all were part of the decision, she said. Nationwide, there is about a 200-day supply of Volts on dealer lots (roughly 100 days in California, the car's biggest market), according to the Detroit Free Press, which says there will be a six-week retooling period (twice as long as normal, but other sources say the shutdown will be four weeks long) at GM's Hamtramck plant this summer to get ready for the second-gen model. The 2016 Volt will get an increase in all-electric range to 50 miles and will then get 41 miles per gallon when the battery runs out. It also has a fifth seat that straddles the battery tunnel and a larger li-ion battery. Related Video: The AP contributed to this report. Featured Gallery 2016 Chevy Volt View 16 Photos News Source: GM, Detroit Free Press Green Plants/Manufacturing Chevrolet Electric Hybrid

Race Recap: Rolex 24 at Daytona was fast and feisty

Let the record show that victory at the 2015 Rolex 24 at Daytona went to the No. 02 Chip Ganassi Racing with Felix Sabates Target/Ford EcoBoost Riley DP driven by Verizon IndyCar drivers Scott Dixon and Tony Kanaan and NASCAR drivers Jamie McMurray and Kyle Larson. The winner did 740 laps to cover 2,634.3 miles in 24 hours and 57.667 seconds. That's a statement to this year's pace in spite of 18 cautions, two more than last year: the Michael Shank Racing Ligier got pole with a time of 1:39.194, slower than last year's pole time of 1:38.270; however, the winning car last year only did 695 laps. The fight for top honors was shaved to a four-car battle over the first third of the event. The No. 02 Ganassi car took the lead on the first lap, swapping it well into the night with the No. 01 Ganassi car, the No. 10 Wayne Taylor Racing Corvette DP, and the defending champion No. 5 Action Express Corvette DP, all of them staying within about 20 seconds of one another. The Action Express car had a fuel connector come loose and lost three laps getting towed back to the pits to have it reattached, but was back in the lead 18 hours in. The No. 01 Ganassi car dropped out with recurring clutch problems 22 hours in, retiring not long after. A race-within-the-race is where the concluding action happened, a seven minute, 30-second dash from the end of the last caution to the checkered flag. During the penultimate pit stops with an hour to go, Dixon was in second place followed Jordan Taylor in the Wayne Taylor Racing DP into the pits but beat him out, taking the lead. The Action Express car was in third. In the last pit stops of the race, Dixon gained even more time, getting a four-second advantage over Taylor. Then a full-course caution came out twenty minutes before the finish when a Prototype Challenge car hit the wall and caught fire, bunching up the field. That closed the pits, but the Wayne Taylor Racing car had to pit during that yellow because of a miscalculation of driver time. No driver can be behind the wheel for more than four hours in a six-hour period but Jordan Taylor was going to go over, so he came in to swap out for brother Ricky. That cost the team any chance of second place, since they took an additional drive-through penalty for entering closed pits. When the track went green again, Sebastien Bourdais in the Action Express car stayed all over Dixon for the final five laps but couldn't get around him.

The 2021 F-150 elevates Ford's bed game

The new 2021 Ford F-150 is ushering in a new era of pickup capability, but there's more to it than the introduction of the PowerBoost hybrid. While that new powertrain is certainly the truck's headlining element, the supporting electrical architecture enables a level of utility that hasn't been offered in past consumer half-tons. The true party trick is Ford's new "Pro Power Onboard" feature, which is essentially a built-in generator that provides juice for the 2021 F-150's rather robust in-bed power station. This system is available even on gasoline-engine models, but its utility is maximized with the electrified powertrain. ICE models equipped with the option max out at 2.0 kilowatts, while the PowerBoost hybrid can be had with either a 2.4- or a whopping 7.2-kilowatt inverter.  The idea here is that the F-150 can essentially stand in for a high-output portable generator. In a worksite example provided by Ford, a PowerBoost model with the 7.2-kW upgrade and a single tank of fuel could provide 32 hours of power for an 1,800-watt compound miter saw, a 1,000W circular saw, a 1,200W battery charger, a 1,200W hammer drill, and a 1,000W air compressor with hundreds of watts to spare for lighting and other accessories. But even without the Pro Power Onboard option, Ford's new bed setup enables more versatility than in previous models. The new Tailgate Work Surface option adds a flat work area with integrated rulers, recesses for pencils or small tools, and even a stand for a personal device.  Ford is neither the first to offer an auxiliary power outlet in a half-ton pickup bed, nor was Ford the first to introduce a more feature-rich tailgate. GMC's MultiPro tailgate was a major innovation on that front, and while it is geared mostly toward improving the cargo utility of the bed, it can also be customized with 12-volt power and even an accessory speaker system. The Ram 1500 is also offered with both a multi-function tailgate and AC power in the bed, though the latter option is limited to models with the RamBox cargo package.  As half-ton pickups approach levels of towing and hauling capability that begin to blur lines with heavy-duty offerings, it's clear that automakers are looking for ways to differentiate themselves without stepping on their own bigger trucks' toes. These new bed and tailgate innovations may yet be the tip of the iceberg when it comes to full-size pickup versatility. Related Video: