2003 Chevrolet High Top *a .w.d.* Explorer Limited Se Show Van.*the Best 1*.wow! on 2040-cars

Auto blog

Chevy Bolt EV's battery shows big improvements over Spark's

Plug-in vehicle battery technology moves fast, and all you need to do to see this in action is to take a look at the new 60-kWh lithium-ion pack inside the 2017 Chevy Bolt EV. Well, you need to do that and then compare it to the battery packs inside of GM's other plug-in vehicles. And you don't even to go as far back as the EV1 to see progress. Let's start with what we know about the new Bolt's pack. It is supposed to drive the Bolt EV over 200 miles on a full charge. It weighs 960 pounds and is made up of 288 cells. Chevy's other all-electric car, the limited-availability Spark EV, had a 19-kWh pack and offered 82 miles of range. It had 192 cells and weighed 474 pounds. So, in the few years since the Spark EV was released, GM engineers have figured out how to get three times the energy capacity and almost two-and-a-half times more range out of a pack that weighs only about twice as much. And that doesn't even get to the price drops. GM has figured out how to get 3x the energy capacity and almost 2.5 times more range out of a pack that weighs only twice as much. Speaking of those 288 cells, that number might sound familiar to regular readers because that's exactly how many are in the new Chevy Volt. But the packs in the Volt and the Bolt are entirely different beasts. For one thing, while the Volt cells are made by LG Chem in Holland, MI, LG Chem will make the Bolt's cells in South Korea. The cell chemistries are also different. We spoke with GM engineer Tim Grewe (again) and while he declined to answer some of our Bolt battery pack questions until more details are unveiled at the SAE World Congress in April, he was able to explain a few things. "The cell inside the Chevy Bolt EV was specifically designed for EV range so it's up on energy," he said. "That's a different cell chemistry than on the extended range Chevy Volt, which is a smaller pack, smaller energy but more power per cell. We work with all of those vehicle requirements and customer demands and we say how do we meet this and we change the chemistry to make it all work." Comparing the 60 kWh in the Bolt and the 18.4-kWh pack in the Volt is really one of those apples to oranges issues, he said. "If you look at the Volt battery pack, how it went from where it was and where it's up to, from 38 miles to 50 miles, that was basic, overall industry improvement. Now, the 18 [kWh] to the 60 [kWh] is extended range vs. EV.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

Chevy reveals new IndyCar aero package

The IndyCar Series is not one that demands its participating teams and automakers to design their own chassis as they do in Formula One, but for this season, the organizers have opened it up to allow for custom aero packages. What you're looking at here is the new look of the chassis to be fielded by teams running under Chevy power. Based on the Dallara DW12 chassis – introduced three years ago and named after the late Dan Wheldon – Chevy's new package is designed for road courses and short ovals, with the speedway configuration to be revealed later. The kit features new wings front and rear and more sculpted side pods. It's also got new wedges at the back to envelop the otherwise open wheels that are a hallmark of Indy racing, a more streamlined engine cover and bigger rear bumper pods. The new package will debut at the Grand Prix of St. Petersburg that will kick off this year's championship in Florida on March 29, followed by the road-course grands prix in Louisiana, Long Beach, Alabama and Indianapolis before the new package needs to be ready for the Indy 500 late in May. Half of the teams on the starting grid this season will be running under Chevy power and are expected to use this new aero kit, with the remaining Honda teams slated to run a different package of their own. Chevrolet Debuts All-New 2015 IndyCar Aero Package Chevy-developed bodywork delivers improved aerodynamics 2015-02-17 INDIANAPOLIS – Chevrolet-powered racecars in the 2015 Verizon IndyCar Series will feature Chevrolet-developed aero packages. Chevrolet introduced the road course/short oval body design today at the Indianapolis Motor Speedway. It is distinguished from the previous racecar with new front wing elements, sculpted side pods and a new rear wing. A speedway configuration for the aero kit, designed for high-speed ovals, will be introduced ahead of its competitive debut at Indianapolis in May. "This is an important milestone in Chevrolet's involvement in IndyCar racing," said Jim Campbell, General Motors U.S. vice president of Performance Vehicles and Motorsports. "We focused on developing an aerodynamic package that delivers an balanced combination of downforce and drag, along with integrated engine performance. It's a total performance package." The new Chevy road course aero configuration delivers greater aerodynamic performance than the previous design.