2004 Chevrolet Express G3500 Cutaway Enclosed Utility Van Truck on 2040-cars

Auto blog

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

GM seatbelt recall affects over 1m Silverados and Sierras

The Basics: General Motors will recall 895,232 examples of the 2014-2015 Chevrolet Silverado and GMC Sierra 1500 pickups in the US. The campaign will also affect the trucks in markets worldwide, and the total number the company will recall is 1,037,982. The Problem: A steel cable connects the seatbelt to the vehicle, but over time repeated bending can cause the part to fatigue and separate. Injuries/Deaths: None reported. The Fix: Dealers will enlarge the side shield opening and install a pusher bracket on the tensioner. Technicians will also replace the entire tensioner assembly if necessary. If You Own One: GM will contact owners about the recall. The company hasn't said when those notifications would begin. More Information: There are still about 3,000 new examples of these older pickups at dealerships. Until mechanics fix the problem, these vehicles are subject to a stop-sale. Similar problems have affected the General's vehicles in the past. In 2015, the company recalled over 400,000 units of the 2011-2012 Chevrolet Malibu for fatiguing cables. It also hit over a million Lambda platform crossovers in 2014. GM Recalling Certain 2014-15 Pickups to Repair Seat Belts DETROIT – GM is voluntarily recalling 895,232 model year 2014-15 Chevrolet Silverado and GMC Sierra 1500 pickups in the United States because the flexible steel cable that connects the seat belt to the vehicle can fatigue and separate over time as a result of the driver repeatedly bending the cable when entering the seat. This issue was discovered through warranty data, and there have been no reports of crashes, injuries or fatalities related to this issue. For trucks in the field, dealers will enlarge the side shield opening, install a pusher bracket on the tensioner, and if necessary, replace the tensioner assembly. The recall in the United States includes a stop-sale of approximately 3,000 new 2014 and 2015 model year pickups still on dealer lots. Dealers will repair the vehicles prior to delivering them to customers. Customers will be notified by General Motors. They also can look up their vehicle identification number (VIN) at either https://vinrcl.safercar.gov/vin/ website or at https://my.gm.com/web/portal/ownercenter to see if their vehicle is part of the recall. GM also will voluntarily recall and repair these models in other countries where they are sold, including Canada, Mexico, and several countries in Latin America and the Middle East.

Coronavirus shakes up America's truck market: GM outselling Ford and Ram

FCA, Ford and General Motors joined the rest of the U.S. auto industry in taking heavy volume hits due to coronavirus-related shortages of both cars and customers. The saying goes that a rising tide lifts all boats; it stands to reason, then, that a falling one would have the opposite effect.  However, as we learned Thursday, the automotive market can behave in unpredictable ways. While the F-Series remained the best-selling nameplate in Q1, GM's full-size trucks are now outselling Ford's again for the first time in years, and with this upward thrust from the General, FCA's Ram was unceremoniously booted out of a hard-earned second place.  While late-March sales declines hit just about every major automaker in one way or another, the model-by-model results weren't nearly so uniform. And because the market tends to be a zero-sum game, for every winner, there generally has to be a loser.  In this case, that winner was GM, and its rise had to come at the expense of another automaker, in this case, Ford. F-Series sales dropped 13.1 percent in the first quarter of 2020, while sales of GM's full-sized Silverado and Sierra surged nearly 28% in the same period. FCA's Ram lineup managed a steady-as-she-goes 7% increase. All-in, GM finished the quarter with 197,743 full-size trucks sold to Ford's 186,562. Here's the full breakdown: Ford F-Series: 186,562  Chevrolet Silverado*: 144,734 Ram P/U: 128,805 GMC Sierra: 53,009 *includes 1,036 Medium Duty sales Things are a but murkier in the midsize segment, where the Chevy Colorado slipped 36% to just 21,430 units sold — just a few hundred better than the slow-selling Ford Ranger's Q1 numbers. The GMC Canyon experienced an almost identical slide, finishing the quarter with just 4,483 units sold. For perspective, Jeep sold more than 15,000 Gladiators and Toyota's midsize Tacoma slipped less than 8%, finishing the quarter with nearly 54,000 sales.  We suspect this discrepancy in full- and mid-size truck sales comes from shifting incentives. Ford, GM and FCA would like to keep selling bigger trucks because there's far more profit margin built into their list prices. Even with tens of thousands of dollars in manufacturer money on the hood, big trucks still make money.  Since these automakers report quarterly, we won't get another good look at these numbers until July, but if you thought that 2019 represented the new normal for U.S. auto sales, well, think again.