2004 Chevrolet Express 2500 Base Standard Cargo Van 3-door 6.0l on 2040-cars

Auto blog

Recharge Wrap-up: EV torque secrets, UC Davis maps future of biofuels

A UC Davis white paper maps out "Three Routes Forward for Biofuels," balancing investment risk with carbon benefits. The first option is "incremental," in which we tinker with the existing biofuel manufacturing infrastructure for small improvements over time. The "transitional" plan suggests integrating cellulosic production and other innovations with existing operations. The third route, called "leapfrogging," would mean building refineries based on new technology such as cellulosic and algae-based biofuels. The paper suggests ways the US could use these three routes together in different areas, and predicts the payoffs in terms of carbon emissions could be significant if the right people are willing to risk the capital. After all, financial advisers are always telling investors to diversify their portfolios to manage risk and rewards in the same way. Read more over at the UC Davis Institute of Transportation Studies. The Formula E Long Beach ePrix will offer free admission. The seventh round of the inaugural all-electric race season, which was moved from Los Angeles to the streets of Long Beach, will offer fans free grandstand and general admission. The race, which takes place on April 5, 2015, will use a 1.6-mile portion of IndyCar's Grand Prix of Long Beach. Read more at LA Times. Polaris is now offering its 2015 GEM electric vehicles, including the new street-legal eM1400 LSV. The passenger and utility vehicles come in two- to six-passenger configurations, many of which are street legal on roads with posted speed limits of up to 35 miles per hour. The eM1400 LSV utility vehicle seats two, offers 1,250 pounds of payload, 1,250 pounds of towing capacity, a top speed of 25 mph and a range of up to 45 miles. Its on-board charger plugs into any standard 110-volt outlet. Read more at Hybrid Cars and check out all the different configurations yourself at the Polaris website. In EVs, more torque does not always equal faster. Green Car Reports found this out when driving the Fiat 500e (with 147 pound-feet) against the similarly weighted Chevrolet Spark EV (with 400 pound-feet). The secret is, at least in part, in the gearing. The Fiat has a 9.6:1 reduction gear, making it quicker at lower speeds despite having far less available torque, while the Chevy uses a 3:1 ratio. The trade-off though, is in top speed. Furthermore, Chevy electronically limits the torque delivery at low speeds, as 400 pound-feet is a lot of launch for the little Spark EV to handle.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

Three automotive tech trends to watch in 2018 and beyond

Every year, technology plays a bigger and bigger role in the auto industry. To put things in perspective, 10 years ago iPod integration and Bluetooth were cutting-edge in-car innovations, and smartphones and apps weren't yet a thing since the first iPhone was only about six months old. And I can't recall anyone talking about autonomous cars. Compare that to today, with mainstream coverage of the auto industry dominated by autonomous technology, along with electrification and almost every move made by Tesla. These three topics were the most significant trends of car tech in 2017 and I believe they will continue to shape the auto industry in 2018 and beyond. Let's examine them. Full Autonomy Gets Closer to Reality While there were many developments this year that indicate we're inching closer to fully autonomous vehicles, I was behind the wheel for hours to witness one of them. In October I had the chance to test Cadillac Super Cruise on a 700-mile, 11-hour drive from Dallas to Santa Fe – and had my hands on the wheel for maybe 45 minutes max throughout the entire trip. Super Cruise is far from making the Cadillac CT6 or any GM vehicle fully autonomous, and has limitations such as functioning only on pre-mapped main highways. While it simply adds a layer of lane centering to adaptive cruise control, the technology will go a long way in making mainstream drivers more comfortable with letting machines take over. On a separate front, GM is pushing ahead with fully autonomous vehicles and announced last month that it plans to launch of fleets of self-driving robo-taxis in several urban areas in 2019. While most automakers are also in the race to make autonomous cars a reality, GM's turbocharging of its efforts appeared to be in response to Waymo, which announced just weeks earlier that its Early Rider Program in the Phoenix area would go completely driverless. The Early Rider Program launched last April, offering the public a chance to ride in Waymo's autonomous Chrysler Pacifica minivans. In this new phase of testing, Waymo is using its own employees as guinea pigs instead of the public while the vehicles operate without a human behind the wheel, and takes another giant step forward for fully autonomous driving.