2010 Chevy Equinox Ltz Awd Htd Leather Sunroof Dvd 39k Texas Direct Auto on 2040-cars

Auto blog

400,000 Chevy, GMC pickups recalled: Side airbags can explode

DETROIT — General Motors is recalling more than 400,000 pickup trucks in the U.S. because the side airbags can explode without warning and spew parts into the cabin. The recall covers certain 2015 and 2016 Chevrolet Silverado and GMC Sierra 1500, 2500, and 3500 trucks. Documents posted Friday by U.S. safety regulators say the airbag inflator can rupture or the end cap can fly off on both sides of the trucks. Documents say three inflators ruptured in 2015 Silverados last month, one in Florida and two in Texas. All three trucks were unoccupied at the time, and GM says it has no reports of injuries. Dealers will replace both side airbag modules. The company says it has a limited number of replacement parts available. Owners will be notified starting Aug. 16 and they'll get a second letter when parts are widely available. About 9,000 of the trucks were recalled last year for the same problem. The company says a manufacturing defect allowed moisture into the inflator while it was being manufactured, causing corrosion. The inflators were made in Mexico by Joyson Safety Systems, the company that took over Takata. Back in April, Silverado and Sierra were among nearly 750,000 GM vehicles in a National Highway Traffic Safety Administration (NHTSA) investigation into non-deploying driver-side airbags. That investigation is ongoing. Takata is responsible for the largest recalls in automotive history, covering about 100 million inflators among 19 major automakers worldwide, including about 67 million inflators in the United States. Nineteen deaths in the U.S. have been attributed to Takata inflators. Only about 50 million of the 67 million recalled inflators in the U.S. have been repaired. This latest recall is a good reminder to go to NHTSA's recalls website and enter your car's VIN. Millions of recalled vehicles still pose a danger to their owners. Yours could be one of them.   Recalls Chevrolet GM GMC airbag Takata airbag recall

Chevy trademark for E-Ray may signal Corvette hybrid or EV

A spy photographer and friend of Autoblog Chris Doane spotted this trademark filing with the US Patent and Trademark Office, and there's not much to it: Chevy is calling dibs on the "Corvette E-Ray" name, and that raises more questions than answers. Being obsessed with this industry is an Autoblog core value, and Corvette is perennially a big deal. It's also historically, and famously, resistant to change. So what's going on here? Unless it's a pure show car, it's unlikely the E-Ray will be a C7-based hybrid. The current Corvette is a tightly-packaged thing, and batteries are bulky. That makes a concept of some sort all the more likely, especially with the Detroit Auto Show coming up. Unconstrained by the packaging of the real-world Stingray, this E-Ray concept may be a pure EV, or a hybrid, of any configuration. GM has built mid-engined Corvette concept cars in the past, and maybe we'll see one again in a few weeks. A gutted C7 with a pure EV drivetrain is also a remote possibility, although less likely – the Stingray wasn't engineered with that in mind, and we think GM's too big to show off a hack-job at a major auto show. Not that it is a Corvette competitor, but don't forget that the Tesla Model S P85D and it's P90D successor have taken pure EV performance into the mainstream – the upper end of the mainstream, to be sure. It has been enough to draw industry performance players into the genre. Look at Aston Martin's production-possible RapidE concept, a pure EV, and the confirmed-for-production Porsche Mission E. We've heard rumblings in the past that Corvette may become a marque unto itself, spawning a variety of variants (including the hypothesized mid-engined production car – don't hold your breath). Perhaps the gas-powered C8, in whatever form it takes, will be complemented with a greener version. We'll try to dig up insider information about what the E-Ray will reveal itself to be, but rest assured that if it shows up at Detroit we'll bring you analysis of every inch of it.Related Video: Featured Gallery 2016 Chevy Corvette Z06 C7.R Edition View 9 Photos Tip: Chris Doane/Facebook Green Rumormill Detroit Auto Show Chevrolet Electric Future Vehicles Hybrid Performance corvette stingray

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.