1986 El Camino Frame Off Restoration on 2040-cars

Auto blog

Chevy's low-cost pedestrian avoidance to debut on 2016 Malibu

The mainstreaming of safety technologies that began on luxury vehicles will get a big boost from General Motors later this year. The General says it plans to offer 22 driver assistance systems across its product portfolio of 2016 models, starting with the redesigned Chevrolet Malibu - the one that we know will keep tabs on teenagers for the benefit of parents. Pedestrian avoidance will be another of its available options. Instead of kitting the sedan out with numerous and expensive radar arrays, the GM system uses the camera mounted next to the rearview mirror that is already used for the lane-keeping function. New software lets it detect pedestrians, and when it detects a potential collision with one, it can alert the driver and brake autonomously if the driver doesn't react. Eventually, engineers want to give it the ability to do the same with cyclists. Because it uses existing hardware updated with new code, GM says the application costs "a few hundred dollars." GM demonstrated the Front Pedestrian Braking preventing a crash with a dummy pedestrian at speeds up to 15 miles per hour. Automotive News reports that it will reduce the severity of impact up to 40 miles per hour, but "may not be of much use in collisions at higher speeds." That feature will also join the options list of the Cadillac CT6. The press release below has more on GM's driver tech soon on the way. Related Video: GM Paving Way to Smarter and Safer Driving at All-New Active Safety Test Area 22 crash-avoidance technologies offered on 2016 Chevrolet, Buick, GMC and Cadillac models MILFORD, Mich. 2015-07-24 – Chevrolet, Buick, GMC and Cadillac will offer 22 different active safety technologies across their 2016 model year U.S. lineups, ranging from driver alerts to those that automatically intervene and assist the driver in critical situations. Safety engineers will develop and test these and other safety technologies for products around the world at GM's new, 52-acre Active Safety Test Area at its Milford Proving Ground near Detroit. The $14 million facility officially opened Friday. "Our comprehensive safety strategy of helping customers before, during and after a crash continues," said Jeff Boyer, vice president of GM Global Vehicle Safety.

Junkyard Gem: 2003 Chevrolet Tracker

When General Motors created the Geo brand to sell vehicles designed and — in some cases — built by Japanese partners, the first four models were introduced for the 1989 model year: the Metro (Suzuki Cultus), Prizm (Toyota Sprinter), Spectrum (Isuzu Gemini) and Tracker (Suzuki Sidekick). Geo got the axe in 1997, with the Metro, Prizm and Tracker becoming Chevrolets. Of those, the Tracker survived the longest, with U.S.-market sales continuing into 2004. Here's an example of a very late Tracker, found in a North Carolina car graveyard recently. The 1989-1997 first-generation Trackers were based on the Suzuki Sidekick, while the 1998-2004 Trackers had the Suzuki Vitaras (not to be confused with the much grander Grand Vitaras) as their siblings. Production of these trucks for the South American market (as the Chevrolet Vitara) continued in Ecuador all the way through 2014. The Tracker name has also gone onto some versions of the Chevrolet Trax around the world. This one is a base four-door hard top/rear-wheel-drive model, which had an MSRP of $17,330. That's about $29,789 in 2024 dollars. You'll find one in every car. You'll see. The engine is a Suzuki 2.0-liter straight-four rated at 127 horsepower and 134 pound-feet. A five-speed manual was base equipment, but very few American vehicle shoppers wanted three pedals by the middle 2000s. This truck has the Aisin four-speed automatic. We like it loud. It appears that someone associated with this truck graduated from Julius L. Chambers High School last year. In the United States, the Tracker was replaced by the Saturn Vue. If Tracker can handle (unspecified Middle Eastern country), it can survive the jungle back home. Siempre contigo.

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: