1960 Chevrolet El Camino on 2040-cars

Auto blog

Updated Chevy Silverado spied, possibly with aluminum components

Chevrolet is readying a refresh for its trusty Silverado pickup, and these spy shots give us our first glimpse at what might be in store. The front and rear fascias of this prototype are covered, obscuring some styling tweaks (with LED accents up front). More interestingly, our spies suggest that many of the Silverado's body components could move to aluminum with this mid-cycle update. The hood will go from steel to the lighter alloy, and it's possible the front fenders could benefit from the weight-saving material, too. Ford's latest F-150 is extremely aluminum-intensive, and by switching the construction, 700 pounds was trimmed off the truck's weight. We've already heard that General Motors is working with a similar plan for its next-generation fullsize trucks. Beyond that, expect the smaller 5.3-liter V8 to ditch its six-speed automatic transmission in favor of the eight-speed unit that's already mated to the larger, 6.2-liter V8. Neither transmission will stick around very long, as the trucks will likely adopt a 10-speed automatic around 2017. Look for the updated Silverado to debut later this year, likely as a 2016.5 model.

This is your 2014 Chevrolet SS

Think you've waited long enough for this? If so, then you'll want to savor the high-res photos we've so far been given of the 2014 Chevrolet SS, the first rear-wheel-drive performance sedan from The Bowtie in 17 years.
We all know its our version of the brand new VF-model Holden Commodore, but what's under the hood that earns the appellation "performance?" A 6.2-liter LS3 V8 engine producing 415 horsepower and 415 pound-feet of torque. That's 35 hp and lb-ft less than the same engine is expected to produce in the 2014 Chevrolet Corvette. Chevrolet says the sedan will get from 0-to-60 miles per hour "in about five seconds."
Shifting comes courtesy of a six-speed automatic with paddles on the steering wheel, while stopping arrive via four-piston Brembo calipers up front, a single sliding piston in back. The forged aluminum wheels are 19-inchers all around, each set supporting right around 50 percent of the sedan's weight, and the aluminum hood and trunk are meant to keep the center of gravity low.

Motor Trend puts Chevy Camaro Z28 and Porsche 911 GT3 Head 2 Head

Motor Trend admits, "This is an unfair comparison." But that doesn't make it any less fun to watch when they pit a Camaro Z/28 against the Porsche 911 GT3. The former has a 7.0-liter V8 with 505 horsepower and 481 pound-feet of torque shifted through a six-speed manual. The latter has a 3.8-liter flat-six with 475 hp and 324 lb-ft shifted through a seven-speed dual-clutch transmission. Yet those are only the little disparities – the big disparities are mass and money: the Camaro weighs 3,882 pounds and costs $76,150 as-tested, the Porsche weighs 3,267 pounds and costs $145,785. But they're both about hardcore performance, so MT takes them out on the street, to the drag strip, to the parking lot for figure eights and a skidpad test, and finally to Big Willow for Randy Pobst to give his professional assessment. Remember when a lotta people spent a lotta time debating Pirates vs. Ninjas? This is like that, only it's the "haul-ass good-time car" vs. the "track surgeon." Enjoy the debate in the video.