Clean Carfax One-owner Leather Interior Heated Seats Mp3 Satellite Radio on 2040-cars

Auto blog

GM to sink over $900M into 4 plants, mostly for a new V8

FLINT, Mich. — General Motors says it will spend more than $900 million to update four factories, with the bulk going to an engine plant in Flint, Michigan, to build the next-generation V8 for big pickup trucks and SUVs. Factories in Rochester, New York; Defiance, Ohio; and Bay City, Michigan, also will see investments, some to make V8 engine components as well as parts for future electric vehicles, the company said Friday. The investments won't create any new jobs, but they will preserve about 2,400 hourly and salaried positions positions at the four sites, the company said. The investments “provide job security at these plants for years to come,” Gerald Johnson, GM's manufacturing chief, said in a statement. Much of the money, $579 million, will go to Flint Engine Operations for equipment to build the sixth-generation small-block V8 that will go into the next round of big pickup trucks and SUVs. The plant now employs about 700 people who also will keep making their current product, a diesel engine used in light trucks. GM, like other automakers, is facing stricter government fuel economy standards and pollution limits starting in the 2024 model year. New vehicles sold in the U.S. will have to average at least 40 miles per gallon of gasoline in 2026, up from about 28 mpg, under new Biden administration rules that undo a rollback of standards enacted under former President Donald Trump. That means the new V8 will have to get better mileage and pollute less than the current versions. Although GM wouldn't release details on the new engine, Johnson said during a news conference at the Flint plant that it would be more efficient than the current version. GM has a goal of selling only electric passenger vehicles by 2035, but Johnson said that's a dozen years out, a period when many customers will still want gas engines. “We know that has a horizon,” he said. “Between here and there, there are a lot of internal combustion customers that we don't want to lose,” he said. In addition to Flint, GM's engine components plant in Bay City, Michigan, will get $216 million to build camshafts and connecting rods, and to machine engine blocks and heads for the new V8 being built in Flint. The plant now employs about 425. The Defiance, Ohio, foundry will get $55 million to build a variety of block castings for the new V8. Included is $8 million for castings to support future electric vehicles, the company said. The plant has about 530 employees.

Here are a few of our automotive guilty pleasures

It goes without saying, but I'll say it anyway. The world is full of cars, and just about as many of them are bad as are good. It's pretty easy to pick which fall into each category after giving them a thorough walkaround and, more important, driving them. But every once in a while, an automobile straddles the line somehow between good and bad — it may be hideously overpriced and therefore a marketplace failure, it may be stupid quick in a straight line but handles like a drunken noodle, or it may have an interior that looks like it was made of a mess of injection-molded Legos. Heck, maybe all three. Yet there's something special about some bad cars that actually makes them likable. The idea for this list came to me while I was browsing classified ads for cars within a few hundred miles of my house. I ran across a few oddballs and shared them with the rest of the team in our online chat room. It turns out several of us have a few automotive guilty pleasures that we're willing to admit to. We'll call a few of 'em out here. Feel free to share some of your own in the comments below. Dodge Neon SRT4 and Caliber SRT4: The Neon was a passably good and plucky little city car when it debuted for the 1995 model year. The Caliber, which replaced the aging Neon and sought to replace its friendly marketing campaign with something more sinister, was panned from the very outset for its cheap interior furnishings, but at least offered some decent utility with its hatchback shape. What the two little front-wheel-drive Dodge models have in common are their rip-roarin' SRT variants, each powered by turbocharged 2.4-liter four-cylinder engines. Known for their propensity to light up their front tires under hard acceleration, the duo were legitimately quick and fun to drive with a fantastic turbo whoosh that called to mind the early days of turbo technology. — Consumer Editor Jeremy Korzeniewski  Chevrolet HHR SS: Chevy's HHR SS came out early in my automotive journalism career, and I have fond memories of the press launch (and having dinner with Bob Lutz) that included plenty of tire-smoking hard launches and demonstrations of the manual transmission's no-lift shift feature. The 260-horsepower turbocharged four-cylinder was and still is a spunky little engine that makes the retro-inspired HHR a fun little hot rod that works quite well as a fun little daily driver.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.