1996 Chevrolet Corvette Grand Sport Hatchback 2-door 5.7l on 2040-cars

Auto blog

Chevy Tahoe-to-K5 Blazer conversion shop renders Jimmy option

Back in 2019 we told you about a truck that looked like a K5 Chevy Blazer, but was actually a modern late-model Tahoe underneath. It was the product of Arkansas shop Flat Out Autos, which reskinned modern GM full-size SUVs to look like their predecessors. Now, the same shop is planning to release a GMC version, converting Yukons to Jimmys. We were impressed by Flat Out's workmanship, beautifully blending the lines of the Blazer into those of the Tahoe. The result was a cohesive design, not just a panel swap. It clearly required a lot of work, which helped justify the $69,000 price tag, not including the cost of the donor Tahoe. FlatOut Autos GMC Blazer Tahoe reskin 01 View 11 Photos At least one new owner was so impressed that they recently purchased four identical Blazer conversions at once. The quadruplets were all finished in blue with a white roof and all based on brand-new 2020 Tahoes. Obviously, with such demand it was only natural for Flat Out to explore other options. On Facebook the company said it was working on a 1972 version with an eggcrate grille. Now, they've also released a rendering paying homage to the K5 GMC Jimmy. The Jimmy conversion uses the original's quad-headlight face, crosshair grille and GMC badging. Like the Blazer conversion, it adds chrome bumpers and milled door handles while adapting the original's 2-door design to the new truck's 4-door body. The rendering only shows the front three-quarter view, but presumably a new carbon fiber rear door would have to be created as the Blazer's says "Chevrolet" across the back. Flat Out says that all the modern conveniences found on the donor Tahoe will work on the conversion, including parking, blind spot and lane keeping sensors. If you have the coin, it's a great way to have retro style without giving up modern safety and performance. The new Blazer has been disappointing to many fans that had hoped for a Bronco-like SUV. Instead, GM gave us a crossover. The Flat Out conversions might be a good compromise, and expanding it to the GMC brand only makes sense. Obviously there's no requirement to use a GMC Yukon as the donor vehicle for the Jimmy, as it's functionally identical to a Tahoe, but wouldn't you want to keep it in the family? Related Video:

Callaway debuts its new C7 Stingray at National Corvette Museum

Callaway showed off its first tuned version of the 2014 Corvette Stingray at the National Corvette Museum last week, giving the rampant enthusiasts of America's sports car a look at the roughly 620-horsepower, supercharged rocket.
Unlike the Corvette SC610 we showed you back in January, this Stingray packs a fair bit more oomph. Horsepower is only up ten ponies, but torque has jumped from 556 pound-feet to "at least" 600 pound-feet. Neither horsepower nor torque is official quite yet, although Callaway is expecting to know just what its creation can do once testing and validation is completed later this month.
The 6.2-liter, supercharged V8 now boasts a new, three-element intercooler, which Callaway claims only allowed the inlet air temperature to increase by ten degrees Fahrenheit during dyno runs. Previous designs saw a 35-degree-Fahrenheit jump. The exhaust system has also been fettled with, and now is even less restrictive.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.