1982 Chevrolet Corvette on 2040-cars

Auto blog

GM to cut production at 5 plants in North America, kill several models

DETROIT/WASHINGTON — General Motors Co said on Monday it will cut production of slow-selling models and slash its North American workforce in the face of a stagnant market for traditional gas-powered sedans, shifting more investment to electric and autonomous vehicles. The announcement is the biggest restructuring in North America for the U.S. No. 1 carmaker since its bankruptcy a decade ago. GM said it will take pre-tax charges of $3 billion to $3.8 billion to pay for the cutbacks, but expects the actions to improve annual free cash flow by $6 billion by the end of 2020. GM plans to halt production next year at three assembly plants: Lordstown, Ohio, Hamtramck, Michigan, and Oshawa, Ontario. The company also plans to stop building several models now assembled at those plants, including the Chevrolet Cruze, the Cadillac CT6 and the Buick LaCrosse, the sources said. Sources said the Chevrolet Volt, Impala and Cadillac XTS would also be discontinued. Signs of the demise of six passenger-car models have been swirling since July. Plants in Baltimore, Maryland, and Warren, Michigan, that assemble powertrain components have no products assigned to them after 2019 and thus are at risk of closure, the company said. It will also close two factories outside North America, but did not identify those plants. The AP reported that 14,700 jobs would be affected. Some 8,100 of those would be white-collar jobs reduced through buyouts or layoffs. The No. 1 U.S. automaker signaled the latest belt-tightening in late October when it offered buyouts to 50,000 salaried employees in North America. The company also said it will cut executive ranks by 25 per cent to "streamline decision making." Some 6,000 factory workers could lose their jobs or be transferred to other plants. Its shares were last up 6.2 percent at $38.16. Tariff 'headwinds' and cost-cutting GM Chief Executive Officer Mary Barra told reporters on Monday the company can reduce annual capital spending by $1.5 billion and increase investment in electric and autonomous vehicles and connected vehicle technology because it has largely completed investing in new generations of trucks and sport utility vehicles. Some 75 percent of its global sales will come from just five vehicle architectures by early in the 2020s. It plans to reduce annual capital spending to $7 billion by 2020 from an average of $8.5 billion a year during the 2017-2019 period.

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

Evatran, Bosch will sell wireless home charger for as low as $1,998*

At the Consumer Electronics Show in Las Vegas today, the big news for plug in vehicles is that they can now start to ditch the plug. As expected, the system costs around $3,000 and is available for both the Nissan Leaf and the Chevrolet Volt. For the first 250 customers, though, Evatran is offering $1,000 off the standard price, a 30 percent discount. Deliveries start next month and Evatran says it expects the discounted units to all be snatched up in the first half of the year. The wireless charger charges as quickly as conventional corded systems. Called the Plugless Wireless EV charger, the 240-volt station will be installed by Bosch and needs a specific adapter to be used with the Volt or the Leaf (the Leaf version costs $100 more). So, any two-EV families out there will need to pony up double if there's a Chevy and a Nissan in the garage. Of course, since the Plugless system only works with older Leafs (2010-2012 model years - but with any Volt), any late adopters will not be able to take advantage of the new technology, for now. Evatran says the wireless charger "charges the Volt and Leaf as quickly as conventional corded systems and all vehicle features, such as charge-timers and phone applications, can be used seamlessly with the Plugless system." After the first 250 units, standard prices for the wireless chargers take effect again: $2,998 (Volt) and $3,098 (Leaf). Evatran says it will announce wireless chargers for additional vehicles and model years later this year. Evatran and Bosch offer Promotional Pricing as low as $1,998 to first 250 PLUGLESS™ Wireless EV Charging Customers LAS VEGAS, Jan. 6, 2014 /PRNewswire/ -- Evatran Group, Inc. ("Evatran"), in partnership with Bosch Automotive Service Solutions, announced today at the 2014 Consumer Electronics Show that it is offering reduced promotional pricing to the first 250 customers who opt to Go PLUGLESS with their electric vehicle ("EV") experience. The PLUGLESS system offers a convenient, wireless charging alternative to the repetitive process of unplugging and plugging-in electric vehicles. The reduced pricing includes all charging hardware and is as much as a 30% discount off the system's standard MSRP. The discount is available only to the first 250 customers. Initial shipments of the PLUGLESS system, the first wireless EV charging product in the world available to individual EV drivers, will begin in February 2014.