1968 Corvette 427 400 Hp Tri Power 4 Speed With A/c on 2040-cars
Somerset, New Jersey, United States
Vehicle Title:Clear
Mileage: 100,000
Make: Chevrolet
Exterior Color: Brown
Model: Corvette
Interior Color: Brown
Trim: stingray
Warranty: Vehicle does NOT have an existing warranty
Drive Type: 4 Speed
Options: Cassette Player, Leather Seats
For sales is a great Running & Driving 1968 427 tri-power 4 speed corvette with factory air conditioning. This is a factor built L68 427 400hp Tri Power car with a/c, HD 3.08 Posi, and very rare rear defogger. The car has a replacement block (73' casting). It still retains the original #matching and date correct intake, carbs, heads, exhaust manifolds, bell housing and VIN correct #660 M20 Muncie trans. Exterior is an older re-spray in the original 992 corvette bronze, with 435 tobacco leather seats. The interior is in above average condition with new leather seat covers. All gauges, lights and fiber optics work. The car has all new brakes, calipers, new stainless exhaust, new fuel tank, fuel lines, rear leaf spring, and new BFG tires on a great set of factory rally wheels. The wiper, and head light doors work as they should. Car is also equipped with factory rear window defogger. This car spent most of its life in the south so the frame and bird cages are excellent.
The best part of this car is the way it runs & drives. The trans shifts smooth, the suspension is extremely tight, and the engine pulls hard without and lag or delay when the secondary's open. If your looking to experience driving one of the most powerful cars that ever left Detroit, this car is a must see .
Car has rear sway bar, 5600 tach, caps, and have original radiator.
The body has no rivets popping on front but does have some fiberglass stress cracks and the seam on the drivers side front you can see the bonding strip. This is a great car to drive Now and restore later
The car is for sale locally and I reserve the right to end the auction early. I am open to offers
Chevrolet Corvette for Sale
2002 chevrolet corvette z06 wrecked partially parted out rebuilt title(US $2,100.00)
Custom corvette 91 engine side pipes ground effects less then 32000 on engine
2007 corvette convertible 3lt f55 every option 2 tone seats mint inside and out(US $39,989.00)
No reserve! 1976 chevrolet corvette stingray t-top coupe well maintained
1996 chevy corvette coupe automatic!! clean carfax!! 2 owners!!(US $16,900.00)
1969 corvette stingray 496bbc 6spd
Auto Services in New Jersey
West Automotive & Tire ★★★★★
Tire World ★★★★★
Tech Automotive ★★★★★
Surf Auto Brokers ★★★★★
Star Loan Auto Center ★★★★★
Somers Point Body Shop ★★★★★
Auto blog
Chevy's latest Silverado videos assume we're idiots
Mon, Jul 6 2015UPDATE: This article has been revised to reflect that any mention of materials used in a future Chevrolet Silverado is speculation. Can we have a sound, rational debate about the merits of aluminum versus steel? According to Chevrolet's latest marketing videos pitting the Silverado against the Ford F-150, the answer is no. The tone of all three ads is almost Orwellian: steel good, aluminum bad. Of course, this will all be a hilarious joke when an aluminum-bodied Silverado comes in 2018. That's an if, as a member of the General Motor public relations team has reminded me that any articles regarding future product are pure speculation. Until then Chevy needs to sell the current Silverado, with its body comprised chiefly of steel, against the Ford F-150's lightweight aluminum panels. Instead of touting the merits of the "most-dependable, longest lasting pickup," the strategy seems to center around negative propaganda towards the 13th element. The tone of all three ads is almost Orwellian: steel good, aluminum bad. Of the three videos, the most fair is Silverado vs. F-150 Repair Costs and Time: Howie Long Head to Head. Basically: aluminum costs more than steel, it's more difficult to repair, and requires special equipment for body shops. In terms of Chevy versus Ford, the blue oval truck costs more and takes longer to repair - an average of $1,755 more and 34 more days in the shop, according to the ad. But why stop there when you can have pitchman Howie Long raising an eyebrow at random facts? When Silverado Chief Engineer Eric Stanczak says of the Ford, "It's manufactured in a way that combines aluminum, rivets, and adhesive in a process that's different than Silverado." Long responds, "Huh. Interesting." At the end of the video, Long says "I'd be interested to know what happens to insurance costs." Note he's not saying anything substantive. If Chevy's legal team could sign off on some facts about insurance rates, it would be in this ad. On our Autoblog Cost to Own calculator, there is no significant difference in projected insurance costs between the two trucks. But at least that ad has facts. The other two videos are pure hype. In Cages: High Stength Steel, real people are asked what they think of aluminum and steel in a room with two cages. Then a bear is released into the room, and the subjects scurry to the safety of the steel cage.
Camaro driver clocked at 171 miles per hour
Wed, Apr 13 2016Chevy's 2016 Camaro SS is a fantastic piece of automotive engineering. It is also, apparently, very, very fast. This latter fact was perfectly illustrated when, on April 8, a Camaro SS driver was nailed in Two Harbors, Minnesota for doing 171 mph. According to WFAA, the unnamed speed demon was flying down Highway 61 near Two Harbors when Hermantown, MN Deputy Police Chief Shawn Padden clocked him at an eye-watering 171 mph. He then recorded the speeder at 168 and 141. At the time, Deputy Chief Padden was working with Minnesota State Patrol on an anti-DWI program called "Toward Zero Deaths". Padden, who was interviewed by the Duluth News Tribune, said he was surprised at the driver's sheer speed. "When he went by me, it was a blur," Padden told the News. "You get used to seeing people going 65 or 70 and what that looks like. But I've never seen anything like this. It's like a rocket on wheels." Fadden chased the Camaro down eventually, but it took some doing. To catch the Camaro, he pushed his Dodge Charger Pursuit to 135 mph just to get into range so the Camaro could see his emergency lights. The speeding driver was ticketed for careless driving, but may lose his license due to a Minnesota law that gives courts the option of revoking licenses for drivers caught doing more than 100 mph. News Source: WFAA, Duluth News Tribune Weird Car News Chevrolet Dodge Driving Safety Coupe Police/Emergency Performance Sedan camaro ss camaro
What if the mid-engine Corvette is really a Cadillac?
Tue, Jun 28 2016Call me crazy, but I'm not convinced the mid-engine Corvette is the next Corvette. The rumor is strong, yes. And, contrary to some of the comments on our site, Car and Driver - leader of the mid-engine Corvette speculation brigade - has a pretty good record predicting future models. But it's another comment that got me thinking: or maybe it's a Cadillac. There is clearly something mid-engine going on at GM, and I think it makes sense for the car to be a Cadillac. First off, check out how sweet the 2002 Cadillac Cien concept car still looks in the photo above. Second, there are too many holes in the mid-engine Corvette theory. There are too many holes in the mid-engine Corvette theory. The C7 is relatively young in Corvette years, starting production almost three years ago as a 2014 model. Showing a 2019 model at the 2018 North American International Auto Show would kill sales of a strong-selling car before its time. Not to mention it would only mean a short run for the Grand Sport, which was the best-selling version of the previous generation. More stuff doesn't add up. Mid-engine cars are, in general, more expensive. Moving the Vette upmarket leaves a void that the Camaro does not fill. There's not much overlap between Camaro and Corvette customers. Corvette owners are older and enjoy features like a big trunk that holds golf clubs. Mid-engine means less trunk space and alienating a happy, loyal buyer. Also, more than 60 years of history. The Corvette is an icon along the likes of the Porsche 911 and Ford Mustang. I'm not sure the car-buying public wants a Corvette that abandons all previous conventions. And big changes bring uncertainty - I don't think GM would make such a risky bet. Chevrolet could build a mid-engine ZR1, you might say, and keep the other Corvettes front-engine. Yes they could, and it would cost a ton of money. And they still need to fund development of that front-engine car. I highly doubt the corporate accountants would go for that. But a Cadillac? Totally. Cadillac is in the middle of a brand repositioning. GM is throwing money at this effort. A mid-engine halo car is the just the splash the brand needs to shake off the ghosts of Fleetwoods past. And it's already in Cadillac President Johan De Nysschen's playbook. He was in charge of Audi's North America arm when the R8 came out. A Caddy sports car priced above $100,000 isn't that unreasonable when you can already price a CTS-V in that range.