1965 Chevrolet Corvette on 2040-cars

Auto blog

Next-generation GMC Canyon, Chevy Colorado spied together

With the debut of the next-generation GMC Canyon coming in a couple of months (in off-road-ready AT4 guise no less), it's no surprise that both it and the Chevy Colorado are out testing without the heavy coverings of early prototypes. One of our spy photographers caught examples of both trucks with close-fitting vinyl wraps. This gives us a great opportunity to see each pickup more clearly, but also to compare and contrast the designs. From the front, the GMC features a narrower, but seemingly taller grille. At the top are slender lamps. They seem to be daytime running lights, though, and below them are much larger units that will function as the actual headlights. The prototype shown seems to be one of the AT4 variants, based on the lack of a lower air dam and the opened up corners of each bumper. Small fog lights show up in the lower bumper, too. As for the Chevy, its grille is wider, and it blends into the headlights. The lights are at the top of the grille, and they seem to incorporate the actual headlights, not just running lamps. The grille mesh has some interesting detailing, and there are auxiliary lights below the main headlights. This one seems to be a more mainstream Colorado model since it still has a front air dam, possibly a Z71 model, considering the chunky tires. Not surprisingly, the two trucks are very similar from the sides and the rear. They have cabins that look lower, longer and more squared-off than the current models. The fenders look more punched out and aggressive, too. The main differentiator between the Chevy and GMC are the wheel openings. The GMC has sharp corners and the Chevy has more rounded ones, as is the case with the full-size trucks. As previously mentioned, the GMC Canyon AT4 will be revealed this summer, so likely in just a month or two. The Colorado will likely be revealed this summer, too. It's expected that it will use the turbocharged 2.7-liter four-cylinder shared with the Silverado. Naturally, it will be available with two- and four-wheel drive and a variety of trim levels including the AT4 and ZR2 off-road versions. Related video:

GM recalls 200k Hummer H3s for fire risk

An issue with fires erupting in some Hummers has prompted General Motors and the National Highway Traffic Safety Administration to issue a recall for nearly 200,000 vehicles around the world. The bulk of them are in the United States. According to the first statement (below) obtained by Autoblog from GM, the issue stems from the HVAC system in Hummer H3 models. The connector module for the blower motor has, in certain cases, overheated, melted the surrounding plastic, and started a fire. 42 such cases have been reported, including three instances of occupants citing minor burns. GM confirms that two of those three cases lead to the vehicle being destroyed in the fire, but states that no crashes or fatalities have resulted. The issue affects 196,379 examples of the 2006-10 H3 wagon and the 2009-10 H3T pickup, with 164,993 estimated to be in the United States. In order to fix the issue, dealers are being instructed to replace the relevant parts of the connector and harness. In a second, unrelated campaign, GM is also calling in 50,731 Chevy Spark and Sonic small cars – 45,785 of them in the US – due to a software glitch. In those affected vehicles fitted with the base radio and OnStar system, the audio system may not be able to switch out of turn-by-turn direction mode, causing the display to go blank and all sound to mute – including key safety warnings. In addition, the system may not switch off, draining the battery. GM states that no crashes, injuries, or fatalities have resulted from this issue, and all that dealers will need to do in this case is reflash the software. Related Video: General Motors is recalling 164,993 2006-2010 model year HUMMER H3 and 2009-2010 model year HUMMER H3T models in the U.S. In certain vehicles, the connector module that controls the blower motor speed in the heat/vent/air conditioning (HVAC) system may overheat under extended periods of operation at high- and medium-high speeds. The heat could melt the plastic surrounding the connector module, increasing the risk of a fire. Dealers will replace the affected portion of the connector and harness. GM is aware of three reported minor burns and 42 fires but no crashes or fatalities related to this condition. Including Canada, Mexico and exports, the total recall population is 196,379. ### General Motors is recalling 45,785 2014-2015 model year Chevrolet Sparks, and 2015 model year Chevrolet Sonics in the U.S.

GM pickup truck plant in Flint to add 1,000 assembly workers

FLINT, Mich. — General Motors said Tuesday it will add 1,000 workers to build new heavy-duty pickup trucks at its plant in Flint, Michigan, and will give priority to GM workers who were laid off elsewhere. The announcement comes the day after GM said it was starting to hand pink slips to about 4,000 salaried workers in the latest round of a restructuring announced in late November that will ultimately shrink its white-collar workforce in North America by 15 percent out of 54,000. GM has come under fire from U.S. President Donald Trump and Midwestern lawmakers for its plans to stop production at five North American factories and cut up to 15,000 jobs in all. The automaker has said it is trying to find new jobs for 1,500 U.S. hourly workers at the affected plants. Flint's truck plant could be a haven for many of these employees. Sales of heavy-duty pickups in the United States have grown to more than 600,000 vehicles a year, up more than 20 percent since 2013, according to industry data. Prices for luxury models can easily top $70,000. GM on Tuesday will celebrate the launch of a new generation of heavy-duty GMC and Chevrolet pickups at the assembly plant in Flint, Michigan, that is now building all such trucks for the company. Elsewhere in the company on Monday, two people briefed on the cuts in the white-collar salaried workforce said GM is cutting hundreds of jobs at its information technology centers in Texas, Georgia, Arizona and Michigan and more than 1,000 jobs at its Warren, Michigan Tech Center. GM is filing new required mass layoff notices with state agencies and disclosed the cuts to lawmakers. The largest U.S. automaker announced in November it would cut a total of about 15,000 jobs and end production at five North American plants. The cuts include eliminating about 8,000 salaried workers, or about 15 percent. GM cut about 1,500 contract workers in December and said 2,300 salaried workers accepted buyouts, officials said. "These actions are necessary to secure the future of the company, including preserving thousands of jobs in the U.S. and globally. We are taking action now while the overall economy and job market are strong, increasing the ability of impacted employees to continue to advance in their careers, should they choose to do so," GM spokesman Pat Morrissey said, adding the bulk of the cuts should be completed in the next two weeks. Morrissey said GM would provide salaried workers with severance packages and job placement services.