1963 Chevrolet Corvette on 2040-cars

Auto blog

2016 Chevy Volt will have more EV range, bigger battery

Meet the new Volt, not the same as the old Volt. That appears to be the story when General Motors introduces the 2016 Chevy Volt at the Detroit Auto Show in January. Today we're getting some more details on the guts of the new plug-in hybrid, and it turns out they're going to be much improved from the current Volt, which first went on sale at the end of 2010. Sure, the first-gen Volt did get some improvements along the way (a slightly larger battery pack, lane departure warnings) but the new Volt – which will go on sale in the second half of 2015 – marks the first time GM has been able to return to the drawing board and really make the improvements that its customers want. That's how Larry Nitz, GM's executive director of vehicle electrification explained it to AutoblogGreen today when explaining the all-new Voltec extended range electric vehicle (EREV) powertrain. "In the Gen 2 is we gave the engine a little more power, a little more torque, a little more displacement, more capability." – Larry Nitz Nitz said that the new Volt will be better in almost every sense: a bigger battery, longer EV-only range, 20 percent better acceleration in the low speed range and higher overall efficiency. This is due, in part, to the Volt's two motors being able to both act as generators and power the car. As we noted this morning, the 2016 Volt will use a larger, 1.5-liter four-cylinder engine, a version of which is already used in the Chinese-market Cruze. Nitz said that this has a number of benefits, including more power and quieter operation. "Some people would say, why did you make [the first-gen engine] so big. I would say, why did you make it so small?" he said. "It works good, our customers love it, but the reality is that if you go a little bit off and use the car a little harder, you can get the engine to need to operate at a higher speed. In an EV, that's quite noticeable. So, what we did in the Gen 2 is we gave the engine a little more power, a little more torque, a little more displacement, more capability and what it has marginally enabled is not only is it more efficient but it's also quieter." Nitz wouldn't talk about how the new powertrain might affect the two other products that use the Volt's underpinnings – the Cadillac ELR and the Opel Ampera – but if you've got a quieter option, we assume that's something ELR drivers would enjoy. But that's a story for another day.

Corvette Stingray gets optional Z06 components

If you've got a Corvette Stingray in the garage and have been tempted by some of the upgrades incorporated into the Z06, but can't quite bring yourself to trade up, Chevy has got some good news for you. The Bowtie brand has announced a series of performance parts derived from those in the Z06, but applicable to the base Stingray. The list of parts includes new cooling elements, prop shafts, brakes, suspension components, and underbody braces. They can all be fitted to Stingray models with or without the Z51 performance kit, and promise to raise the Corvette's game if not quite to Z06 levels, then closer to them. And for Z06 owners interested in gaining a bit more advantage, Chevy is offering a new Level 3 aero kit as well. The parts were demonstrated on upgraded 'Vettes at the Ron Fellows driving school at Spring Mountain. The school is also serving as technical partner and the track as the location for a new spec racing series built around the C7 Corvette. Dubbed the Michelin Corvette Challenge, the calendar is composed of fifteen half-hour races held in pairs over eight weekends, all on the six-mile circuit near Las Vegas. The cars to be used in the series will be close to showroom stock and feature many of the new Z06-derived upgrades, with Michelin racing slicks for dry weather and Pilot Super Sport tires in the wet. Perhaps most compelling of all will be the payment plan that will allow participating amateur racers to pay in installments across the season and take home their Corvette after the season's conclusion in December. New Z06 Parts Enhance Corvette Stingray Performance Broad range of chassis, suspension and aero components enhance capability 2015-11-02 PAHRUMP, Nev. – Chevrolet today and drivers from the Ron Fellows Corvette high-performance driving school at the Spring Mountain track demonstrated Stingray models enhanced with components from a new lineup of Z06-based performance parts. They're designed for 2014+ Stingray models, including Z51-equipped cars. "We've selected specific components from the Corvette Z06 and engineered them to fit the award-winning Stingray," said Jim Campbell, Chevrolet U.S. vice president of Performance Vehicles and Motorsports. "These Z06 parts enhance the handling, braking, cooling and downforce performance of the Stingray." Ron Fellows, champion Corvette Racing driver, collaborated with Chevrolet Performance engineers on the all-new portfolio.

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video: