Corvair Greenbriar Van 1963 on 2040-cars

Auto blog

Corvette Z06. Nissan GT-R Nismo. Motor Trend Head 2 Head. 'Nuff said.

Here is a video we've been waiting for, one that will get broadband fiber optic cables glowing like Hooker headers on a dyno. For Episode 62 of Head 2 Head, Motor Trend throws the 2015 Chevrolet Corvette Z06 into the bear pit with the latest Nissan GT-R Nismo. What comes out of that is seventeen minutes of don't-look-away video. We're only going to give you the specs. The 3,527-pound Z06 gets on with a supercharged 6.2-liter V8 with 650 horsepower and 600 pound-feet of torque, applied to the wheels via a seven-speed manual transmission. With the Z07 performance package appended it has a front splitter and winglets, and a three-section rear spoiler among its aero aids. The tested model also wore carbon ceramic brakes, which helped push its $89,985 MSRP out to $105,210. The 3,881-pound GT-R Nismo plays the underdog – again – with a 3.8-liter twin-turbo V6 spitting out 600 hp and 481 lb-ft, yoked to a six-speed dual-clutch transmission. The GT-R left its 'performance bargain' days behind years ago, and this top-shelf version starts at $151,585 but has almost everything it can get, so the as-tested price was only a skosh more at $151,880. We're not going to tell you any more than that. Click on the video and let Carlos Lago and his two mean minions tell you a story you won't soon forget. Related Video: News Source: Motor Trend Channel via YouTube Chevrolet Nissan Coupe Luxury Performance Videos motor trend nissan gt-r nismo head 2 head

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

GM's Oshawa plant may close after Camaro production moves

Most of the time, when vehicle production is moved from one assembly plant to another, it spells bad news for the former. While General Motors won't go so far as to say its Oshawa, Ontario factory, which is losing the Chevrolet Camaro to the Lansing Grand River plant, is in trouble, analysts seem to think the factory's days are numbered. Forecasts for the facility are far from positive. The loss of the Camaro this year, combined with GM's targeted shutdown of a single-shift assembly line responsible for the fleet-only Chevy Impala Limited and the Equinox crossover is a bad enough omen. But with AutoForecast Solutions CEO Joe McCabe telling The Detroit News that the plant's other two products, the Cadillac XTS and Buick Regal, aren't likely to stick around beyond 2017, things look decidedly grim at Oshawa. "There is a fairly strong chance that the plant could close," Jeff Schuster, senior VP of forecasting for LMC Automotive, told The Detroit News. That doesn't mean that Unifor, Canada's auto union, and the Canadian government are going to let the factory die without a fight. And with the latter chipping in $10 billion as part of GM's 2009 bailout, you might think it has a degree of leverage in the situation. A meeting between the government and the Detroit Three at the 2015 North American International Auto Show revealed that Oshawa is already a topic of conversation. "We made it very clear that we would like to see an indication on the future of Oshawa sooner, in particular because the timing is very challenging for our supply chain to be able to adjust to potentially future orders or changes, but also to know that there are going to be future opportunities at Oshawa," Ontario's Minister of Economic, Development, Employment and Infrastructure Brad Duguid told The Detroit News. "Bottom line: It's time they made a longer-term commitment here," Unifor President Jerry Dias said, echoing Duguid's statements. It's unclear if this sort of strong talk will be enough to save 3,300-plus employees, although based on the analysts' forecasts, we doubt it.