1965 Corvair Monza on 2040-cars

Auto blog

GM posts $4 billion third-quarter profit thanks to trucks and SUVs

DETROIT — General Motors is posting huge third quarter numbers, pulling in $4 billion in profit over three months after losing money due to the virus outbreak. GM's adjusted earnings were $2.83 per share, easily outpacing Wall Street's per-share projections of $1.43, according to a survey by FactSet. Revenue of $35.5 billion also edged out most expectations. Shares jumped almost 6% before the opening bell Thursday. The company swung back from a $806 million loss in the second quarter, when it was restarting factories shuttered for safety during the early stages of the pandemic. The Detroit automaker joined most global automakers in reporting better-than-expected earnings from July through September as sales across the globe started to rebound from coronavirus lockdowns, especially in China. GM sales in China jumped 12% in the third quarter, with sales of its Buick and Cadillac brands both rising more than 25%. In the U.S., GMÂ’s most profitable market, sales fell 9.9% in the third quarter compared with a year ago, but were a dramatic improvement over the 34% drop in the second quarter. Sales improved sequentially each month, the automaker said, an encouraging trend. GMÂ’s profit was boosted by higher-priced pickup trucks and large SUVs, which have seen strong sales in the U.S. through the pandemic. It was the best quarter on record for GM's Chevrolet Blazer. Sales of the Cadillac XT6 spiked 45% in the U.S. over last year. Large pickups also sold well. GM also said it was pumping $2 billion into its Spring Hill, Tennessee manufacturing plant to push its transition to produce electric vehicles. Last week, crosstown rivals Fiat Chrysler and Ford reported strong third-quarter net income. FCA said it made $1.4 billion for the period, while Ford earned $2.39 billion. Related Video: Earnings/Financials Buick Cadillac Chevrolet GM GMC

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

GM cutting vehicle trim options to save money for electrification

Information continues to filter out about GM's plans based on comments the automaker made during its Capital Markets Day event in February. GM President Mark Reuss said the company's push to save money by rationalizing the number of build combinations will continue in 2020, carrying on the work done in 2019. As GM Authority covers, last year, the carmaker cut 3,500 components across model lines, a 12% drop in the number of parts it needed to stock in its plants. Reuss used the next-generation Chevolet Equinox and GMC Terrain as examples for more cost efficiencies, saying build possibilities — which include international markets and their options — will be cut by more than 50%, and use more shared parts. "We will reduce total trim levels on Equinox and Terrain from eight to six," Reuss said, "reduce engine variants from 11 to 5, reduce build combinations from more than 200 to less than 100 per program, and see significant cost savings of an already paid-for architecture that took the mass out, helping us self-fund electrification programs." GM will plow a large amount of the money it saves into its ambitious EV program. In 2017, the automaker said it intends to have 20 electric vehicles on the market by the end of 2023, some of which could be shared between brands. An automotive analyst at Seeking Alpha and a piece in Automobile attempted to put specifics to what we should expect. As Automobile points out, the first two EVs in the 20-car program are already on sale, being the Ariv Meld and Ariv Merge eBikes available in Belgium and The Netherlands. We've seen the Cruise Origin autonomous rideshare taxi, although we don't know when it will hit the road. The next three, which we should see in the metal shortly, are two Cadillac EVs and the GMC Hummer EV pickup. The Cadillac pair are expected to be sized like the XT4 and XT5, and along with the Hummer, should hit the market starting in late 2021.