2007 Chevrolet Cobalt Ls 2-door on 2040-cars

Auto blog

GM to build outgoing Silverado and Sierra until late 2019

As it has done with previous generations, General Motors is keeping the outgoing versions of its 1500 pickups in production despite the arrival of the all-new 2019 Chevrolet Silverado and 2019 GMC Sierra. The production of the previous, K2 generation models will begin to be wound down gradually, according to Automotive News, starting with crew cabs "early next year," and double and regular cab models following during "the early second half of next year." The old model trucks will continue to be built into "late 2019" based on market demand, GM's spokesperson Kim Carpenter said. The Chevrolet will go by the name Silverado LD, with the GMC Sierra designation still to be announced. Some of the outgoing models are built by sharing the assembly work between two GM plants. Partially finished Silverado and Sierra double cab bodies are shipped from Fort Wayne, Ind., to Oshawa, Ont., where the trucks are completed, including receiving paint. This eases the workload in Fort Wayne, where production of the new T1 generation trucks started in July 2018. In January, the Silao plant in Mexico will take on the duties of building new generation regular cab and crew cab trucks. Carpenter also said that the "Oshawa shuttle," as the shared production is called, has been very successful. As a result, 60,000 more trucks will be built than what the original production forecast initially called for. GM's latest quarterly profits, disclosed last week to be $1 billion, have been far higher than expected and will result in full-year profits far higher than what had been predicted in light of steel tariffs. GM isn't the only truck maker taking a similar multi-generation approach for 2019. Both the outgoing and redesigned Ram 1500 are in production, with the previous generation being dubbed Ram 1500 Classic. Related Video:

2016 Chevrolet Colorado Diesel First Drive [w/video]

The first thing you notice inside the diesel Chevy Colorado is that it's quiet. Almost too quiet. A lot has been done to quell noise and vibration with this new powertrain, and it shows – or rather, doesn't. There's some characteristic diesel clatter at idle, but even then it's distant and practically disappears as you start moving down the road. At full throttle, when the engine is at its noisiest, the sound isn't particularly diesel-like, just a pleasant intake breath. The accompanying smoothness is almost eerie. When we ask where all the noise went, Chevy's engineers, marketing guys, and PR reps all explain that this refinement is what Americans want. We're still not sure. This is a truck, after all, and the diesel pickup customer is different from the guy buying a diesel Cruze for his highway commute. Chevy contends that they're also not the same as the buyer of a Silverado HD. Although this 2.8-liter Duramax four-cylinder has been in service elsewhere around the globe, its first US application is in the Colorado and its GMC Canyon twin. The engine puts out 181 horsepower and 369 pound-feet of torque, and it does so unobtrusively as a result of a lot of modifications for our market. To keep normal diesel sensations out of the cabin, the intake and oil pan both get acoustic treatments. A new, thicker material is used for firewall sound deadening. Redesigned balance shafts have tighter tolerances to increase smoothness. The diesel powertrain is smoother than the Colorado's gasoline V6. One of the more interesting and certainly unexpected vibration-reduction changes is a special torque converter from German supplier LuK equipped with a centrifugal pendulum absorber. This pendulum spreads from the center of the torque converter as engine speed increases and is tuned to absorb the four-cylinder's second-order vibrations, not just those in a narrow frequency band. It does an admirable job, especially considering the engine's biggish, 0.7-liter cylinders, which lead to bigger vibrations. The result is a powertrain that's smoother than GM's (not particularly smooth) corporate V6, which is available in the standard Colorado. It's quieter than a Cruze diesel and even out-softens some gas direct-injection engines on the market. Paradoxically, it may be the most refined of all of the Colorados. No vibration comes through the steering wheel, pedals, floorboards, or even the rearview mirror. But you can tell it's a diesel when you hit the throttle.

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video: