1996 Chevrolet Cheyenne 4x4 Diesel on 2040-cars
Alexander City, Alabama, United States
|
Clean truck, runs and drives great. Extended cab, 4x4, 6.5L V8 Diesel, 285/R-16 BFG All-terrain E rated tires with very low miles. Goose neck hookup in long box bed. Routine service and maintenance by certified Chevrolet dealership. Clean interior, well kept, and all around nice truck. |
Chevrolet Cheyenne for Sale
Restored rare documented 1971 chevrolet k10 4x4 cheyenne short box & gauge pkg
Old blue 1978 chevy cheyenne big 10 camper special
1971 chevrolet c10 series(US $22,900.00)
1972 chevrolet suburban
1997 chevy cheyenne 3500 1 ton tool truck
1996 lifted chevrolet k1500 cheyenne extended cab pickup 4x4 lift gmc chevy(US $12,000.00)
Auto Services in Alabama
United Auto Repair ★★★★★
Transmission Doctor and More ★★★★★
Townsend Roadside Assistance ★★★★★
Tire Express ★★★★★
Stadium Grill ★★★★★
Radiators Inc ★★★★★
Auto blog
Chevy previews 2016 Malibu ahead of New York debut
Thu, Mar 5 2015With everything going on in Geneva this week, it would be all-too easy to forget that there's still stuff going on back home in America. And the upcoming new Chevy Malibu is a prime example. Chevrolet has announced that it is bringing an all-new Malibu to the New York Auto Show next month, teasing us with this preview image and a few enticing details. For starters, when we say it's all new, this time we mean it's all new. The next-generation Malibu has been built on a new platform that uses more high-strength steel to cut 300 pounds off the curb weight compared to the outgoing model. It's also got a wheelbase that's almost four inches longer, with shorter overhangs front and rear and a roofline that tapers stylishly and more gradually towards the tail. We'll have to wait a little longer – but not too much longer – to find out more, but in the meantime you can read what Chevy's telling us so far in the press release below. Born Again: Next-Gen Chevrolet Malibu Announced Larger, lighter and more efficient Malibu to be unveiled at New York Auto Show 2015-03-04 DETROIT – Designed to deliver more efficiency, connectivity and advanced safety features than ever, the next-generation 2016 Chevrolet Malibu will make its public debut at the New York International Auto Show this April. Using a blank slate approach, Chevrolet designers benefited from an entirely new architecture, which for Malibu includes a wheelbase nearly four inches longer than the outgoing model. That, in turn, provides increased rear legroom and interior space. Due to a higher-strength steel structure, the new Malibu is also expected to be 300 pounds lighter than the current model, which benefits the sedan's fuel economy and handling. "Malibu's gorgeous styling is the result of a masterful understanding of proportions," said Ed Welburn, General Motors' vice president of Global Design. "The roofline has been stretched rearward giving a more sleek profile, while the front wheels have moved forward and front and rear overhangs have been reduced. Along with the sculpted body side, these cues help Malibu appear more dynamic and sophisticated." More details about the 2016 Chevrolet Malibu will be shared each week leading up to the vehicle's global debut. The 2016 Malibu is expected to go on sale by the end of 2015. Founded in 1911 in Detroit, Chevrolet is now one of the world's largest car brands, doing business in more than 115 countries and selling around 4.8 million cars and trucks a year.
Weekly Recap: BMW rolls out ambitious plug-in hybrid electric plan
Sat, Dec 6 2014"We believe that for the United States, this is going to be very important." – Julian Arguelles Let there be no doubt, BMW is serious about electric vehicles. The German automaker said this week it will make plug-in hybrid versions of all of its core models, an aggressive move that demonstrates its commitment to electric propulsion systems. BMW did not specify which vehicles will get the plug-in systems or provide a timeline for when they will arrive. But the announcement is clearly more than blustering, and the company revealed a 3 Series plug-in prototype this week at an event in France. BMW said the 3 Series uses a version of its 2.0-liter turbocharged four-cylinder engine (240 horsepower, 300 pound feet of torque) with an electric motor sandwiched between the engine and transmission in place of the torque converter. It has an all-electric range of 22 miles. A plug-in X5 with the same powertrain was also displayed alongside the 3 Series, though the X5 has been on the auto-show circuit for more than a year, including a recent stop in Los Angeles. Those two vehicles use "eDrive," and BMW's plans represent the first widespread transfer of its technology from development of the i3 and i8 models to more mainstream products. BMW said it's developing electric powertrains so they can be deployed rapidly across its range, and they are flexible enough to be used with fuel cells in future products. Enticingly, BMW is also working on a "Power eDrive" system, which debuted in a 5 Series GT concept at the event in France. This setup has two electric motors powered by a 20-kilowatt-hour battery pack, and when teamed with a four-cylinder turbo, pump out about 670 hp. Reinforcing BMW's commitment, the company will add more than 200 jobs at its factory in Dingolfing, Germany, to support electric-vehicle development. The moves come as BMW and other automakers diversify their portfolios while fuel economy and emissions regulations are getting tighter around the world. The United States has set a 54.5-mpg CAFE requirement for the 2025 model year. BMW said the electric vehicles were developed with an eye toward the US market, its government policies and its wide-ranging commuting styles. "We believe that for the United States, this is going to be very important," spokesman Julian Arguelles said. Ben Scott, a senior analyst in London with automotive research firm IHS, said BMW's moves are expensive – but necessary – to keep pace with the market.
Weekly Recap: GM plans massive new paint shop at Chevy Corvette factory
Sat, May 23 2015General Motors is laying out some serious green to maintain the Chevy Corvette's expansive color palette. The automaker is breaking ground on a new paint shop this summer that's part of a $439-million investment to upgrade the 34-year-old Bowling Green, KY, factory that builds the Stingray. The massive new structure will total 450,000 square feet, nearly half the size of the current 1-million square-foot facility. Construction is expected to take two years and won't impact Corvette production. The upgrades include new robots that save paint and create a better finish, longer, more efficient ovens to bake in the finish, and LED lighting. There's also a dry scrubbing booth technology with a limestone handling system that eliminates waste. GM has invested $135 million in the factory in last four years for the changeover to build the C7 and to relocate its Performance Build Center to Bowling Green. The improvements continue to modernize the Kentucky factory, which has become a tourist attraction in its own right, as more than 56,000 enthusiasts visited it last year. The upgrades are part of a $5.4-billion investment GM confirmed in April that will remake its US footprint in the next three years. The Bowling Green expansion underscores GM's continued commitment to the Corvette, which sold nearly 38,000 copies around the world last year, an eight-year high. "With this major technology investment, we can continue to exceed the expectations of sports car buyers for years to come," North American manufacturing manager Arvin Jones said in a statement. OTHER NEWS & NOTES Takata recall hits 34 million vehicles The National Highway Traffic Safety Administration expanded the Takata airbag recall to an almost unthinkable 34 million vehicles on Tuesday. The recall is part of an agreement reached by the two sides where Takata admitted some of its airbag inflators have a defect, and the deal compels the company to comply with all future regulatory actions and investigations. Takata's airbag inflators were produced with "a propellant that can degrade over time" and lead to ruptures, NHTSA said. Six deaths have been attributed to the flaw worldwide. Investigations conducted by Takata, automakers, and others have not determined the exact cause of the inflator problem, but NHTSA said moisture appears to alter the propellant's chemical structure. It then ignites too rapidly, creates too much pressure that ruptures the inflator, and blasts shards of metal at passengers.









