1971 Cheyenne Super C-10 Pickup Restored on 2040-cars

Auto blog

Experimental mid-engine XP-819 Corvette going up for auction

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.

Some 2012-13 Chevy Volts may not have enough battery coolant

The 2012 and 2013 model year Chevrolet Volt extended-range plug-in vehicle may have a battery glitch caused by low coolant levels. No recall has been issued and General Motors is taking care of the issue at no cost to drivers. Some of the affected Volts may have lower-than-advisable coolant levels because of some pesky air pockets in the car's cooling circuit. When the coolant levels get too low, the charging system for the battery powering the car's onboard generator (i.e. the Rechargeable Energy Storage System, or the RESS) may be shut down, turning one's Volt into a run-of-the-mill gas-powered car, and a pricey one at that. The Car Connection says GM is advising owners of the '12 and '13 Volts to contact their local Chevy dealer for a free fix. GM representatives didn't immediately respond to a request for comment from AutoblogGreen for more details. We believe this is a separate issue than the one that brought 8,000 Volts back to the dealers for a battery coolant fix, what GM called a "voluntary customer satisfaction effort," a few years ago. General Motors sold 23,094 Chevy Volts last year after selling 23,461 Volts in 2012, so that fix-it list may get fairly lengthy. Check out a GM-Volt.com user thread related to this issue here. *UPDATE: Chevrolet spokesman Randy Fox confirmed in an e-mail to AutoblogGreen that the company issued a service bulletin to dealers that they may need to top off coolant levels on certain Volts because of the issue, and that the vehicle will "return to normal charging operation" once that's done.

The 2021 F-150 elevates Ford's bed game

The new 2021 Ford F-150 is ushering in a new era of pickup capability, but there's more to it than the introduction of the PowerBoost hybrid. While that new powertrain is certainly the truck's headlining element, the supporting electrical architecture enables a level of utility that hasn't been offered in past consumer half-tons. The true party trick is Ford's new "Pro Power Onboard" feature, which is essentially a built-in generator that provides juice for the 2021 F-150's rather robust in-bed power station. This system is available even on gasoline-engine models, but its utility is maximized with the electrified powertrain. ICE models equipped with the option max out at 2.0 kilowatts, while the PowerBoost hybrid can be had with either a 2.4- or a whopping 7.2-kilowatt inverter.  The idea here is that the F-150 can essentially stand in for a high-output portable generator. In a worksite example provided by Ford, a PowerBoost model with the 7.2-kW upgrade and a single tank of fuel could provide 32 hours of power for an 1,800-watt compound miter saw, a 1,000W circular saw, a 1,200W battery charger, a 1,200W hammer drill, and a 1,000W air compressor with hundreds of watts to spare for lighting and other accessories. But even without the Pro Power Onboard option, Ford's new bed setup enables more versatility than in previous models. The new Tailgate Work Surface option adds a flat work area with integrated rulers, recesses for pencils or small tools, and even a stand for a personal device.  Ford is neither the first to offer an auxiliary power outlet in a half-ton pickup bed, nor was Ford the first to introduce a more feature-rich tailgate. GMC's MultiPro tailgate was a major innovation on that front, and while it is geared mostly toward improving the cargo utility of the bed, it can also be customized with 12-volt power and even an accessory speaker system. The Ram 1500 is also offered with both a multi-function tailgate and AC power in the bed, though the latter option is limited to models with the RamBox cargo package.  As half-ton pickups approach levels of towing and hauling capability that begin to blur lines with heavy-duty offerings, it's clear that automakers are looking for ways to differentiate themselves without stepping on their own bigger trucks' toes. These new bed and tailgate innovations may yet be the tip of the iceberg when it comes to full-size pickup versatility. Related Video: