1970 Chevelle Ls6 Convertible on 2040-cars

Auto blog

Chevrolet Malibu could last until 2024 before joining the dodo

Automotive News pieced together all available intel on the Chevrolet and GMC lineups, trying to ascertain how much life each model might have left. Concerning the Chevrolet Malibu, the answer is not too much, and the historic nameplate's final years don't look like the glory kind. After a major overhaul in 2016 boosted sales for the ninth-generation sedan to 227,881 units, the 2018 sales fell to 144,542, and this year's are down almost 15% through the end of June. The Malibu is one of two Chevrolet sedans still breathing - the other being the Impala for now - but only for about five more years. AN says there'll likely be a refresh in 2022, followed by a visit from the Reaper in 2024. After that, it could be "indirectly replaced" by an electric vehicle, one of the 23 EVs that GM is working on for 2023.     The Impala will meet the ax earlier despite a recent stay of execution. Production is still set to close in January 2020. In the entire GM stable, Cadillac might soon be the only marque with sedans. The Buick LaCrosse has a date with death, and Groupe PSA won't supply Opels-as-Regals forever.  The Sonic hatchback should say goodbye at the end of 2020, a year before the seemingly eternal Spark is thought to die. Two years after that, according to one report, the Camaro will go back into cold storage, perhaps forever, and AN says an "expected redesign of the car in 2021 was reportedly canceled." Finally, let's give one final shout-out to the Chevrolet Cruze, a global nameplate, which in the United States alone outsells the Malibu, outsold the Camaro by a factor of three last year, and absolutely trounces the Impala, Sonic, and Spark. Even that couldn't get a stay of execution. In more uplifting news, everything's happening on the crossover and truck side in the next few years. The Chevy Bolt is due for a refresh next year, even though it has "become more important for self-driving ride-hailing fleets that GM Cruise plans to operate than for consumers." In 2021, the Bolt-based crossover should bow, first in China, then here. It's said to look like "a mix of the Bolt and Trax" in spy shots. Still waiting for a green light: a possible subcompact GMC crossover called Granite that might make it to market by 2023. The full-sized SUV triplets Tahoe, Suburban, and Yukon could show their new faces in 2020. The Silverado might get an updated interior in 2020 or 2021, while the Colorado and Canyon mid-sized pickups won't get attention until perhaps 2023.

Corvette Stingray gets optional Z06 components

If you've got a Corvette Stingray in the garage and have been tempted by some of the upgrades incorporated into the Z06, but can't quite bring yourself to trade up, Chevy has got some good news for you. The Bowtie brand has announced a series of performance parts derived from those in the Z06, but applicable to the base Stingray. The list of parts includes new cooling elements, prop shafts, brakes, suspension components, and underbody braces. They can all be fitted to Stingray models with or without the Z51 performance kit, and promise to raise the Corvette's game if not quite to Z06 levels, then closer to them. And for Z06 owners interested in gaining a bit more advantage, Chevy is offering a new Level 3 aero kit as well. The parts were demonstrated on upgraded 'Vettes at the Ron Fellows driving school at Spring Mountain. The school is also serving as technical partner and the track as the location for a new spec racing series built around the C7 Corvette. Dubbed the Michelin Corvette Challenge, the calendar is composed of fifteen half-hour races held in pairs over eight weekends, all on the six-mile circuit near Las Vegas. The cars to be used in the series will be close to showroom stock and feature many of the new Z06-derived upgrades, with Michelin racing slicks for dry weather and Pilot Super Sport tires in the wet. Perhaps most compelling of all will be the payment plan that will allow participating amateur racers to pay in installments across the season and take home their Corvette after the season's conclusion in December. New Z06 Parts Enhance Corvette Stingray Performance Broad range of chassis, suspension and aero components enhance capability 2015-11-02 PAHRUMP, Nev. – Chevrolet today and drivers from the Ron Fellows Corvette high-performance driving school at the Spring Mountain track demonstrated Stingray models enhanced with components from a new lineup of Z06-based performance parts. They're designed for 2014+ Stingray models, including Z51-equipped cars. "We've selected specific components from the Corvette Z06 and engineered them to fit the award-winning Stingray," said Jim Campbell, Chevrolet U.S. vice president of Performance Vehicles and Motorsports. "These Z06 parts enhance the handling, braking, cooling and downforce performance of the Stingray." Ron Fellows, champion Corvette Racing driver, collaborated with Chevrolet Performance engineers on the all-new portfolio.

Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]

With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.