1969 Chevrolet Chevelle Ss Hardtop 2-door 427 on 2040-cars

Auto blog

2022 Chevrolet Silverado and GMC Sierra now cost more, again

GM Authority put Chevrolet and GMC pickup truck prices under the microscope, spying the same macroscopic issues none of us can avoid seeing: Price increases. The 2022 Chevy Silverado 1500 and 2022 GMC Sierra 1500 have been hit with their third price increases this year. The Heavy Duty versions of those same trucks have been given their fourth price increases this year. Starting with the light-duty options, they've been rung up for another $900 across the board, which breaks down to $800 added to the MSRP and $100 added to the destination charge. The mandatory cost for shipping a truck from the factory to the dealer is now $1,795. That destination fee is now more than 5% of the purchase price of the least expensive 2022 Silverado, the Regular Cab Work Truck trim with a Standard Bed and 2.7-liter turbocharged four-cylinder retailing for $36,395 after destination. And that price is $3,200 more than the initial list price from last December. At the other end, the Silverado ZR2 is up $3,400. Average that out, and the Silverado's MSRP has gone up by nearly $700 every month since initial pricing came out. On the GMC side, the bidding starts at $37,195 for the Regular Cab Pro trim with a Standard Bed, a $4,700 increase over pricing announced last October.  Stepping up a tow rating or two, the Silverado HD is now $1,100 more expensive — $1,000 tacked onto the MSRP, the destination charge plumped another $100 to $1,795. The Silvy 2500 HD now starts at $41,295. The Sierra HD turns the screw a few more degrees, going up by $2,100 after the $100 increase for destination. The low bar for the Sierra 2500 HD is $41,995, a $4,100 rise over the price when it hit dealer lots last summer. Whew. Anyone know where the exit is for this "new normal?" Related video:

2016 Chevy Camaro to drop 200 pounds

The sixth-generation Chevrolet Camaro makes its grand debut on May 16 at a big celebration on Detroit's Belle Isle. Until then, Chevy's strategy seems to be showing off the pony car's new components piece by piece. With the exhaust headers and front end already on display, the Bowtie is now giving a glimpse at some of the upcoming model's aluminum components. The Camaro is going on a diet for its latest generation, and Chevy claims that the switch to the Alpha platform and other new components shed over 200 pounds compared to the current model. That will put the pony car at around 3,500 pounds. The lower weight will contributes to better fuel economy, quicker acceleration and more direct handling, according to the automaker. Among the changes are aluminum front and rear suspension assemblies (pictured above) that weigh 21 percent less than the current units. Also, Chevy promises in its announcement "links on some models feature an intricate, structurally optimized design made with a rigid composite material that's even lighter than aluminum." In addition to these improved parts, the Camaro uses the lightweight metal for the beam that supports the instrument panel to save 9.7 pounds more. The only two pieces reportedly carrying over to the latest design are Chevy's bowtie and SS badges, and at least one engine in the range is known to be a version of the 6.2-liter LT1 V8. With over a month until the next Camaro's debut, we might get a glimpse of even more of the car's new parts in the coming weeks. Related Video: 2016 Camaro Does More with Less New model is at least 200 pounds lighter than current car 2015-03-30 DETROIT – For the all-new, 2016 Chevrolet Camaro, the team was challenged to improve the handling, acceleration and fuel economy of the award-winning current model. To meet all three objectives, the team focused on a singular mission: reduce mass. By obsessively searching for opportunities to save ounces, the team pared more than 200 pounds off the Camaro compared with the fifth-generation model. As a result, the Camaro does more with less, according to Al Oppenheiser, Camaro chief engineer: "We kept the cornering confidence and control that make the Gen 5 Camaro 1LE so fun to drive, and added a greater sense of agility," he said. "The new Camaro brakes harder, flicks into corners more quickly, and drives out of the corner faster.

NHTSA investigating nearly 750,000 GM models over non-deploying airbags

Nearly 750,000 vehicles built by Chevrolet, GMC, and Cadillac are the subject of a National Highway Traffic Safety Administration (NHTSA) investigation due to non-deploying driver-side airbags. While the investigation is ongoing, the agency believes the issue is likely due to rust particles that form on the inflator's connection terminal interface. The list of nameplates included in the investigation includes Chevrolet's Silverado, Tahoe, and Suburban, GMC's Sierra, Yukon, and Yukon XL, plus Cadillac's Escalade, Escalade ESV, CT4, CT5, and XT4. All of the potentially affected vehicles are 2020 or 2021 models, according to a bulletin published on the NHTSA's website. Investigators launched the probe in April 2021 after 15 consumers reported airbag-related issues, including nine who said an airbag malfunction light appeared in the instrument cluster. More alarmingly, the NHTSA is aware of six accidents that caused significant damage to the car's front end yet didn't trigger the driver's airbag. It adds that there are no fatalities linked to the issue, but there are six crashes and eight injuries reportedly blamed on it. No evidence suggests this problem is related to the millions of potentially deadly Takata inflators recalled over the past few years. General Motors is aware of the defect. It sent a technical service bulletin (TSB) to its dealers in March 2021 to address the aforementioned warning light. The note explains the issue is due to "rust particles in the connection terminal interface of the driver's airbag inflator." The company hasn't issued a safety recall yet, however. Whether it will partially depends on the NHTSA's findings. It's currently looking into the scope and the severity of the problem, and it wants to understand its implications on driver safety. Investigators will decide whether General Motors needs to recall the 749,312 cars that are part of the probe when they close their investigation. General Motors has already spent a significant amount of money replacing defective airbag-related parts in its cars. In November 2020, it was ordered by the American government to recall nearly 6 million pickup trucks and SUVs equipped with potentially dangerous Takata airbag inflators. It repeatedly argued that testing proved the inflators were safe, and it petitioned the agency four times starting in 2016 to avoid a recall, which cost an estimated $1.2 billion (about a third of its net income in 2020).