1968 Ss 396 Factory 4 Speed Elcamino Body Survivor 20+ Pictures on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Corvette Z06. Nissan GT-R Nismo. Motor Trend Head 2 Head. 'Nuff said.

Here is a video we've been waiting for, one that will get broadband fiber optic cables glowing like Hooker headers on a dyno. For Episode 62 of Head 2 Head, Motor Trend throws the 2015 Chevrolet Corvette Z06 into the bear pit with the latest Nissan GT-R Nismo. What comes out of that is seventeen minutes of don't-look-away video. We're only going to give you the specs. The 3,527-pound Z06 gets on with a supercharged 6.2-liter V8 with 650 horsepower and 600 pound-feet of torque, applied to the wheels via a seven-speed manual transmission. With the Z07 performance package appended it has a front splitter and winglets, and a three-section rear spoiler among its aero aids. The tested model also wore carbon ceramic brakes, which helped push its $89,985 MSRP out to $105,210. The 3,881-pound GT-R Nismo plays the underdog – again – with a 3.8-liter twin-turbo V6 spitting out 600 hp and 481 lb-ft, yoked to a six-speed dual-clutch transmission. The GT-R left its 'performance bargain' days behind years ago, and this top-shelf version starts at $151,585 but has almost everything it can get, so the as-tested price was only a skosh more at $151,880. We're not going to tell you any more than that. Click on the video and let Carlos Lago and his two mean minions tell you a story you won't soon forget. Related Video: News Source: Motor Trend Channel via YouTube Chevrolet Nissan Coupe Luxury Performance Videos motor trend nissan gt-r nismo head 2 head

Leaked GM document shows GMC Sierra I6 diesel is more powerful than F-150's

GM told us earlier this year that the 2019 GMC Sierra would be getting a 3.0-liter I6 diesel option, but it never mentioned power or fuel economy figures. Hold the phone though, because a leaked GM Canada document just showed up online that lists out the details we've been waiting for. Originally published by TFL Truck, the 3.0-liter oil-burner supposedly makes 282 horsepower and 450 pound-feet of torque. For those who are counting, that's more than the Ford F-150's 250 horsepower and 440 pound-feet from its 3.0-liter diesel. It soundly bests the 240 horsepower and 420 pound-feet of torque from Ram's 3.0-liter diesel as well. Fuel economy is another story, though. The promotional material states that it will get 28 mpg on the highway, which is 2 mpg short of the F-150's 30 mpg — mind you, it's only capable of that magical 30 mpg figure in rear-wheel drive form. There's another caveat here, too; these are numbers for Canada, so they're not exactly finalized EPA figures. However, we wouldn't expect drastic differences between the two when the American numbers come out. The leaked documents also state the diesel Sierra will be capable of towing 7,800 pounds. That number seems remarkably low when compared to the F-150, which can tow up to 11,400 pounds with its diesel. Extra power and torque would have us assume that GM could get even better numbers than Ford, so we're going to hold our final judgment for official word. A 10-speed automatic will do the shifting on the diesel, just like on the 6.2-liter V8. Since the Chevy Silverado is also expected to get this engine, we can assume the figures would be almost, if not identical, to those we see here. We recently drove the 2019 Sierra and Silverado without the diesel engines, so go check those reviews out if you'd like to know more of our thoughts on the redesigned GM trucks. Related video: