1968 Chevrolet Chevelle Ss Convertible Clone on 2040-cars

Auto blog

Corvette Z06 and Viper TA square off at the strip

There are many long-standing grudge matches among automobiles: 911 vs GT-R, Mustang vs Camaro, Ferrari vs Lamborghini... but as far as high-end American metal goes, it doesn't get much more legendary than Viper vs 'Vette. So after Chevy released the new Corvette Z06, we knew it was only a matter of time before it would have to square off against the Viper TA. And what better place to pit these two parallel pillars of American performance than on the drag strip? Fortunately that's just what we have here. In one corner, the 2014 Dodge Viper TA, with its 8.4-liter V10 pumping out 640 horsepower and 600 pound-feet of torque. In the other, the 2015 Chevrolet Corvette Z06, the supercharger on its 6.2-liter V8 more than making up for the discrepancy in displacement and cylinder count to produce 650 hp and just as much torque. But numbers don't tell the whole story, so watch the video clip to see which reaches the end of the quarter-mile first. News Source: To the Floor via YouTubeTip: James Chevrolet Dodge Videos drag race chevy corvette z06 quarter mile drag strip srt viper ta

Before Chevrolet's Redline, there was the Saturn Red Line

While Chevy rolls out Redline special editions across more of the lineup at this year's Chicago Auto Show, we've been eating some 'member berries and started thinking about the last time GM used the term. Back in 2004, Saturn rolled out Red Line (two words) editions of the Ion and Vue. The lineup was joined by the Sky Red Line in 2007, and the second-generation Vue kept the tradition going in 2008. This was in the heady days of the mid-2000s, before the financial crisis and GM's bankruptcy reorganization that saw the end of Saturn. The press release headline for the 2008 Sky is now cringe-worthy: "Hot-selling Sky helps drive Saturn product renaissance." Performance lineups were the hot new thing, as automakers attempted to cash in on the tuner trend popularized by The Fast and the Furious. Chevy had SS models, Pontiac had GXP, and Saturn had Red Line. Across the Detroit Metro area, Dodge had a slew of SRT models, and Ford's Special Vehicle Team brought us the SVT Lightning pickup, the SVT Focus, and a smattering of hopped-up Mustangs. The performance cred of Red Line models varied from car to car. The Ion Red Line shared the same engine as the original Chevy Cobalt SS, a 205-horsepower supercharged 2.0-liter four-cylinder, 65 hp more than stock. Car and Driver tested one with a 0-to-60-mph time of 6.1 seconds and said the Ion "tears down the wall that has separated enthusiasts from the Saturn brand for so long." The Vue Red Line, meanwhile, came with the same optional Honda-sourced 3.5-liter V6 you could get in the regular Vue, and added a stiffer, lower suspension, bigger wheels with more aggressive rubber, and recalibrated steering assist. When the Vue was redesigned for the 2008 model year, the Vue Red Line was a similar proposition. The engine was now from GM, and up 7 horsepower to 257, but you could get it in both Red Line and XE trim. Aside from the tire and suspension upgrades, Red Line models now came with a unique front fascia and rear exhaust cutouts. The most exciting Red Line, of course, was the high-performance version of the Sky roadster, which shared underpinnings with its Pontiac Solstice twin. This model came with GM's hot 2.0-liter Ecotec Turbo, good for 260 horsepower. The extra power was crucial in covering up the Sky's unfortunate manual gearbox ratios, which left the non-turbo model aching for torque in lower gears. As we all know, Saturn was taken by the grim reaper in 2009 after an attempt to sell the brand to the Penske Group.

GM to sink over $900M into 4 plants, mostly for a new V8

FLINT, Mich. — General Motors says it will spend more than $900 million to update four factories, with the bulk going to an engine plant in Flint, Michigan, to build the next-generation V8 for big pickup trucks and SUVs. Factories in Rochester, New York; Defiance, Ohio; and Bay City, Michigan, also will see investments, some to make V8 engine components as well as parts for future electric vehicles, the company said Friday. The investments won't create any new jobs, but they will preserve about 2,400 hourly and salaried positions positions at the four sites, the company said. The investments “provide job security at these plants for years to come,” Gerald Johnson, GM's manufacturing chief, said in a statement. Much of the money, $579 million, will go to Flint Engine Operations for equipment to build the sixth-generation small-block V8 that will go into the next round of big pickup trucks and SUVs. The plant now employs about 700 people who also will keep making their current product, a diesel engine used in light trucks. GM, like other automakers, is facing stricter government fuel economy standards and pollution limits starting in the 2024 model year. New vehicles sold in the U.S. will have to average at least 40 miles per gallon of gasoline in 2026, up from about 28 mpg, under new Biden administration rules that undo a rollback of standards enacted under former President Donald Trump. That means the new V8 will have to get better mileage and pollute less than the current versions. Although GM wouldn't release details on the new engine, Johnson said during a news conference at the Flint plant that it would be more efficient than the current version. GM has a goal of selling only electric passenger vehicles by 2035, but Johnson said that's a dozen years out, a period when many customers will still want gas engines. “We know that has a horizon,” he said. “Between here and there, there are a lot of internal combustion customers that we don't want to lose,” he said. In addition to Flint, GM's engine components plant in Bay City, Michigan, will get $216 million to build camshafts and connecting rods, and to machine engine blocks and heads for the new V8 being built in Flint. The plant now employs about 425. The Defiance, Ohio, foundry will get $55 million to build a variety of block castings for the new V8. Included is $8 million for castings to support future electric vehicles, the company said. The plant has about 530 employees.