1966 Chevy Chevelle Malibu Sport Coupe 2dr Hardtop Barn Find Factory A/c on 2040-cars
Fresno, California, United States
Body Type:Coupe
Vehicle Title:Clear
Engine:283ci
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 8
Make: Chevrolet
Model: Chevelle
Trim: Malibu
Power Options: Air Conditioning
Drive Type: RWD
Mileage: 99,999
Exterior Color: Burgundy
Disability Equipped: No
Interior Color: Black
Warranty: Vehicle does NOT have an existing warranty
Picked up this all original numbers matching 1966 Chevelle Malibu Sport Coupe up in Mariposa Ca. a few weeks ago. From what I can tell it was parked back in 1979 from the sticker on the plate & it still wearing some old school bias ply tires that still hold air. I have just about every registration card from 1966-1979 along with the original window sticker, factory build sheet, sales invoice, & protecto plate among other things. It has no interior. All the glass is good except the windshield is cracked. The grill looks like it will clean up really nice. Has mostly all the trim although some of it needs straightening & all of it will need polishing. The body is pretty straight except for a crease right behind the drivers door. It has all 4 original hubcaps, spare tire & jack & OG black plates. It came with a 283ci 195hp & a powerglide transmission & has a 10 bolt rear end. Has factory a/c & power steering & still sports the air injection pump & all emissions equipment. We changed the carb & belts hooked up a fuel can to the fuel pump & it fired right up. No lifter noise, smoke or anything. There is rust all around the back window from the vinyl top I'm sure, under the windshield & a small spot on the bottom of the passenger front fender. The trunk pan also needs replacing. There is a hole in the rear drivers floor under the back seat & some really small ones in the drivers front floorboard. Other than that it's all surface rust. This Chevelle was sold new here in Fresno, Ca. at Hallowell Chevrolet on 2-24-1966 & was built at the Fremont Ca. Plant. The color is Madeira Maroon with a black vinyl top & black interior. I do have a pair of bucket seats that can go with it but no back seat. just about everything this car needs is available through OPG. It's a running project for someone that's looking for a Chevelle with all the original paperwork but it has not been on the road in over 30 years so it is being sold as-is & will need to be transported. I have a clean California title & it's on Non-Op so there are no fees due. If you would like anymore information or specific pictures send me an e-mail & i'll get back to you. I have lots more pictures of the floors & under carriage if you would like to see them send me your e-mail & I'll send them to you.Thank You.
Chevrolet Chevelle for Sale
Pro tour style 1970 chevrolet chevelle "ss" cowl induction with ice cold a/c w@w(US $17,895.00)
67 chevelle ss 396 4 speed (real ss 138 code car)
1972 chevelle 350 auto power brakes power steering(US $17,900.00)
1970 chevy chevelle ss clone 454 v8 automatic cd red(US $29,900.00)
1964 chevrolet el camino - loaded - 327ci - a/c - ps - pb - buckets - wow!
1972 pro touring chevrolet chevelle 488 all aluminum motor 500 h.p ss clone
Auto Services in California
Yoshi Car Specialist Inc ★★★★★
WReX Performance - Subaru Service & Repair ★★★★★
Windshield Pros ★★★★★
Western Collision Works ★★★★★
West Coast Tint and Screens ★★★★★
West Coast Auto Glass ★★★★★
Auto blog
GM to build outgoing Silverado and Sierra until late 2019
Tue, Nov 6 2018As it has done with previous generations, General Motors is keeping the outgoing versions of its 1500 pickups in production despite the arrival of the all-new 2019 Chevrolet Silverado and 2019 GMC Sierra. The production of the previous, K2 generation models will begin to be wound down gradually, according to Automotive News, starting with crew cabs "early next year," and double and regular cab models following during "the early second half of next year." The old model trucks will continue to be built into "late 2019" based on market demand, GM's spokesperson Kim Carpenter said. The Chevrolet will go by the name Silverado LD, with the GMC Sierra designation still to be announced. Some of the outgoing models are built by sharing the assembly work between two GM plants. Partially finished Silverado and Sierra double cab bodies are shipped from Fort Wayne, Ind., to Oshawa, Ont., where the trucks are completed, including receiving paint. This eases the workload in Fort Wayne, where production of the new T1 generation trucks started in July 2018. In January, the Silao plant in Mexico will take on the duties of building new generation regular cab and crew cab trucks. Carpenter also said that the "Oshawa shuttle," as the shared production is called, has been very successful. As a result, 60,000 more trucks will be built than what the original production forecast initially called for. GM's latest quarterly profits, disclosed last week to be $1 billion, have been far higher than expected and will result in full-year profits far higher than what had been predicted in light of steel tariffs. GM isn't the only truck maker taking a similar multi-generation approach for 2019. Both the outgoing and redesigned Ram 1500 are in production, with the previous generation being dubbed Ram 1500 Classic. Related Video:
GM raises 2023 guidance on strong sales, higher profits
Tue, Apr 25 2023General Motors beat first-quarter profit estimates and raised its full-year earnings and cash-flow guidance after vehicle demand at the start of the year surpassed expectations. Its shares rose in premarket trading. GM made $2.21 a share in adjusted profit in the first quarter, compared to a consensus forecast of $1.72 a share. Revenue rose 11% to $39.99 billion, it said Tuesday, which was more than the $39.24 billion analysts expected. The stronger results stem from rising sales in the US, even in the face of higher interest rates and inflation. GM executives said demand was strong enough to revise 2023 guidance upward, boosting profit estimates for the year by $500 million to between $11 billion and $13 billion. “We did it with strong production and inventory discipline and consistent pricing,” GM Chief Financial Officer Paul Jacobson said on a call with journalists. “All in all, weÂ’re feeling confident about 2023.” The Detroit automaker raised per-share full-year guidance to between $6.35 and $7.35, up from $6 to $7 a share, and said free cash flow would also increase by $500 million to a range of $5.5 billion to $7.5 billion. GMÂ’s shares pared a gain of as much as 4.4% before the start of regular trading Tuesday, rising 3.5% to $35.50 as of 6:55 a.m. in New York. The stock was up 1.9% for the year as of the close on Monday. North American Strength The automakerÂ’s sales were particularly strong in North America, where first-quarter earnings rose before interest and taxes rose to $3.6 billion. Vehicle sales rose 18% to 707,000 in the region. Jacobson said the company originally expected to sell 15 million vehicles in the US this year, slightly less than the 15.5 million annualized rate automakers foresaw in the first quarter. North American demand was enough to offset a weak performance in China, GMÂ’s second-largest market. The automaker continues to struggle in the country, where its vehicle sales fell 25% to 462,000 vehicles in the quarter. Profits from its joint ventures in the market slumped 65% to $83 million. The market has struggled overall in the wake of Covid-19 restrictions and foreign automakers have had to overcome a growing preference for Chinese brands by competing on price, squeezing profit margins. The situation in China probably wonÂ’t significantly improve until the second half of the year, according to Jacobson. GM remains on target to sell 150,000 electric vehicles this year, the CFO said.
Chevy Silverado Midnight Edition, Custom ready to stand out in pickup line
Thu, Feb 12 2015Chevrolet spent its Chicago Auto Show introducing a pair of fullsize pickups that promise image-conscious buyers a truck experience that goes beyond the standard range, with the murdered-out Midnight Edition and the um, not murdered-out, Custom. Let's start with the Custom, which adds 20-inch alloys, as well as chrome bumpers, mirror caps and door handles to the Silverado LS. Available in both V6 and V8 varieties, and with the customer's choice of two- or four-wheel drive, the Silverado Custom is the decidedly mellower example of Chevy's special edition styling. The Midnight Edition, meanwhile, throws subtlety out the window with a menacing set of visual upgrades. Based on the Z71, the Midnight adds 18-inch wheels, a spray-in bedliner and unique Z71 and Bowtie badges, all in black, of course. The front and rear bumpers, headlamp bezels, tow hooks, mirror caps and door handles, are also finished in the stealthy shade. Check out our live images of both special edition trucks, and let us know what you think down in Comments.























