2004 Chevrolet Cavalier Ls Loaded on 2040-cars

Auto blog

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

Junkyard Gem: 1987 Chevrolet Turbo Sprint

Fifteen years ago, I wrote my first-ever automotive article under the name Murilee Martin, and it didn't take me long to start writing about one of my favorite automotive subjects: the junkyard. Before I'd refined my system for documenting discarded vehicles, however, I shot a lot of boneyard photos that never got used. For today's Junkyard Gem, I have four shots from early 2007 of one of the rarest turbocharged machines of the 1980s: the Chevrolet Turbo Sprint. The Chevrolet Sprint was really a rebadged Suzuki Cultus, from the pre-Geo era when General Motors sold the Isuzu Gemini as the Chevrolet Spectrum, the Daewoo LeMans as the Pontiac LeMans and the Toyota Corolla as the Chevrolet Nova (soon enough, the Spectrum became a Geo, and the Nova became the Prizm). The second-generation Cultus appeared in 1988, becoming the Geo Metro on our shores the following year. The Turbo Sprint was available for just the last two years of the Sprint's 1985-1988 American sales run, and it appears that just a couple of thousand were sold; if I'd known at the time just how rare they were, I'd have shot more photos of this one at the now-defunct Hayward Pick Your Part. The turbocharged 993cc three-cylinder produced 70 horsepower, 22 better than the naturally-aspirated version. Since the Turbo Sprint weighed just 1,620 pounds (that's about 500 pounds lighter than a barely more powerful '22 Mitsusbishi Mirage), it was plenty of fun to drive. For 1988, the regular Sprint hatchback cost $6,380 while the Turbo Sprint listed at $8,240 (that's about $15,375 and $19,855 today, respectively). Believe it or not, a Turbo Sprint actually raced in the 24 Hours of Lemons 10 years ago, though it didn't end well. This ad is for the regular Cultus, not the Cultus Turbo, but the screaming guitars sound reasonably turbocharged. For the most part, Chevy Sprint marketing was all about cheap purchase price and stingy fuel economy… at a time when gasoline prices were cratering. Related Video:

The 2021 F-150 elevates Ford's bed game

The new 2021 Ford F-150 is ushering in a new era of pickup capability, but there's more to it than the introduction of the PowerBoost hybrid. While that new powertrain is certainly the truck's headlining element, the supporting electrical architecture enables a level of utility that hasn't been offered in past consumer half-tons. The true party trick is Ford's new "Pro Power Onboard" feature, which is essentially a built-in generator that provides juice for the 2021 F-150's rather robust in-bed power station. This system is available even on gasoline-engine models, but its utility is maximized with the electrified powertrain. ICE models equipped with the option max out at 2.0 kilowatts, while the PowerBoost hybrid can be had with either a 2.4- or a whopping 7.2-kilowatt inverter.  The idea here is that the F-150 can essentially stand in for a high-output portable generator. In a worksite example provided by Ford, a PowerBoost model with the 7.2-kW upgrade and a single tank of fuel could provide 32 hours of power for an 1,800-watt compound miter saw, a 1,000W circular saw, a 1,200W battery charger, a 1,200W hammer drill, and a 1,000W air compressor with hundreds of watts to spare for lighting and other accessories. But even without the Pro Power Onboard option, Ford's new bed setup enables more versatility than in previous models. The new Tailgate Work Surface option adds a flat work area with integrated rulers, recesses for pencils or small tools, and even a stand for a personal device.  Ford is neither the first to offer an auxiliary power outlet in a half-ton pickup bed, nor was Ford the first to introduce a more feature-rich tailgate. GMC's MultiPro tailgate was a major innovation on that front, and while it is geared mostly toward improving the cargo utility of the bed, it can also be customized with 12-volt power and even an accessory speaker system. The Ram 1500 is also offered with both a multi-function tailgate and AC power in the bed, though the latter option is limited to models with the RamBox cargo package.  As half-ton pickups approach levels of towing and hauling capability that begin to blur lines with heavy-duty offerings, it's clear that automakers are looking for ways to differentiate themselves without stepping on their own bigger trucks' toes. These new bed and tailgate innovations may yet be the tip of the iceberg when it comes to full-size pickup versatility. Related Video: