1979 Chevrolet Caprice Classic Landeau Coupe 2-door 5.7l on 2040-cars
Crivitz, Wisconsin, United States
|
This 1979 Caprice Classic Coupe is a one owner, kept in the garage for the last 15 plus years and has only 50,000 miles. It is a 350 engine and is the original motor and transmission. It runs great and rides like a Cadillac.
The interior is like new. All chrome is like new. The following has been done in the last two weeks: New steel brake lines, spark plugs, Spark Plug wires, muffler, couplers, and battery. I have replaced the radiator, the heater core and the master cylinder, changed the oil and filter and balanced the wheels. The tires are very good. The only negative is there are some minor surface rust in spots that could easily be repaired by someone with basic body work knowledge. With a little effort, this could easily be a fine show car. That said, I would not hesitate to drive this car to California and back. Please call or email with any questions. Vehicle is located in Crivitz, WI (about an hour North of Green Bay) Jim - 715-927-1892 |
Chevrolet Caprice for Sale
1967 chevy caprice 2 door coupe 327 v8 - 275 hp
1966 chevrolet caprice 396/325 #'s match 12bolt posi 17k miles original survivor(US $15,000.00)
1994 chevrolet caprice wagon ss,impala wagon custom,iroc rims,lt1 w/mods,alarm(US $3,500.00)
1992 chevrolet caprice classic one family owned low miles runs great v8 white(US $2,799.99)
1985 caprice classic original
1987 chevrolet caprice classic ls brougham sedan 4-door 4.3l(US $13,500.00)
Auto Services in Wisconsin
Zinecker`s Auto Repair ★★★★★
Wilson Collision Center ★★★★★
Van Linn`s ★★★★★
Tuff Enuff Auto Body ★★★★★
Scotts Automotive Pewaukee ★★★★★
Schok`s Autobody ★★★★★
Auto blog
Car and Driver reveals spy shots of mid-engine 2017 Corvette
Thu, Jan 8 2015Some news in the car world is perennial, and some is perennially wrong. Typically news about some upcoming mid-engined Chevy Corvette has fallen into the latter category, with rumors never yet generating a road car. This time could very well be different. Car and Driver has some exclusive photographs of what would appear to be a Corvette test mule with a mid-mounted engine. The car in question might look like a Holden SSV ute that's undergone some indelicate modification, but C/D editor Don Sherman assures that the bones of a C8 'Vette live within that crude bodywork. Sherman points to the closeness of the cabin to the front axle as clue number one of this car's mid-engine attitude, as well as the powertrain-sized space between the back of the seats and the rear axle. The roof and glasshouse are all clearly plucked from the current C7, and the gas tank filler positioned on the B-pillar is another huge clue. The buff book estimates that the mule points to a timeline for sale, even. Testing on this level could mean a mid-engined C8 ready for sale in as few as 20 months, or for the 2017 model year. Click over to Car and Driver to have a close look at this important set of spy photographs, as well as a rendering of what a finished C8 might ultimately look like
LG Chem's troubled Chevy Volt battery plant hiring once again
Thu, Sep 25 2014The Michigan battery plant known for paying its workers to do nothing has turned things around and is now hiring more workers, specifically to do something. South Korea-based LG Chem, which runs the factory to supply the Chevrolet Volt extended-range plug-in vehicle with its lithium-ion batteries, held a job fair recently to bring on 40 new employees in order to meet higher battery demand, according to WZZM, the ABC affiliate for Grand Rapids, MI. The LG Chem factory is in Holland, MI, about 30 miles west of Grand Rapids, and it made its first batteries last year. Prior to that, though, the factory gained notoriety after a US Department of Energy (DOE) probe found that workers there were getting paid to do, well, nothing. That's because demand for the battery packs was so low that it cost less for the plant to sit idle. The DOE was conducting the probe because of its financial grant to LG Chem. But that was then and today is today. LG Chem is looking to ramp up production in advance of the second-generation Volt. That 2016 model-year version is said to have a longer all-electric range and better performance and will ride on a new chassis, but few official details have surfaced. We will know more when we get our first look at the car at the Detroit Auto Show in January.
GM plans to restart production in Mexico on May 20
Mon, May 18 2020MEXICO CITY — General Motors is tentatively planning to restart operations at its auto assembly plant in the Mexican city of Silao on May 20, according to a message to workers seen by Reuters on Sunday, as the car industry prepares to exit the coronavirus lockdown. Separately, the president of GM's Mexican unit advised suppliers to prepare to resume operations. “We are now beginning a new phase given the Mexican governmentÂ’s official announcement earlier this week to consider the transportation manufacturing industry as essential for the countryÂ’s economy,” Francisco Garza, president ofGeneral Motors de Mexico, wrote in an email to suppliers dated on Friday that was viewed by Reuters. The reopening of the plant in Silao would be a positive signal for the auto sector in North America, whose supply lines are highly interconnected between the United States, Mexico and Canada. The plant in the central state of Guanajuato has been idled for weeks due to the coronavirus outbreak. Workers had previously been told to plan to return to their jobs on May 18. A GM spokeswoman said the company could not confirm when it would restart operations at any of its facilities in Mexico because it is awaiting more guidance from the government. The message to the plant's workers came after the government on Friday clarified when the industry could begin easing restrictions imposed because of the health emergency. On Wednesday, the government said automakers could start going back into production from May 18. It then withdrew that advice and suggested the new start date would be June 1. Finally it indicated the sector, which forms the backbone of Mexican manufacturing, could begin operating as soon as next week if companies had the required safety measures in place. U.S. officials and its auto industry have pressed Mexico's government to get its factories open again because American operations depend heavily on parts from south of the border. However, some politicians are wary of opening too fast. Mexico registered its first case of coronavirus weeks after the United States and Canada and the toll of daily infections and deaths in the country reached new peaks over the past few days. The Silao production facility, which makes highly profitable pickup trucks for GM, is one of the biggest automotive plants in Guanajuato, a major Mexican carmaking state. Related Video:























