Chevrolet Camaro Ss/rs on 2040-cars
Glenwood, Iowa, United States
True 1969 Camaro Ss/rs Car With All Gm Original Body Panels, Including Floor And Trunk Pans, This Was A Very Solid Car Prior To Frame Off Restoration The Car Was Completely Disassembled And Complete Restoration Was Performed, As You Can See In The Pictures, All Fuel Lines , Brake Lines Were Installed After The Under Body Was Painted With A Satin Black Finish, All Suspension Was Replaced With All New Springs, Front And Rear And Steering -suspension Tie Rods Ect. Were Replaced. All Wiring Was Replaced. The Complete Interior Was Re Upholstered , New Headliner Installed,dash Pad And Radio. The 396 Engine Was Rebuilt And Was On The Dyno At 406hp Engine Is Not Numbers Matching But Is Dated Correct. The Transmission Is A M20 Rebuilt And The 12 Bolt Rear End Has Been Rebuilt With A 355 Gear Ratio. Every Bolt Nut And Fastener Was Replaced Or Reconditioned As Needed During This Frame Off Restoration. Everything Works To Perfection And This Car Drives Like It Just Came Off The Assemble Line.
Chevrolet Camaro for Sale
Chevrolet camaro ss(US $16,000.00)
Chevrolet camaro 1ss coupe 2-door(US $12,000.00)
Chevrolet camaro z/28 x77 4-speed(US $15,000.00)
Chevrolet camaro rs(US $16,000.00)
Chevrolet camaro ss(US $13,000.00)
Chevrolet camaro ss(US $13,000.00)
Auto Services in Iowa
Tony`s Tire Service ★★★★★
Scotty`s Body Shop ★★★★★
New Deal Auto Salvage ★★★★★
NAPA Auto Parts ★★★★★
Mobile Media Blasting ★★★★★
Midstates Auto Upholstery Inc ★★★★★
Auto blog
2016 Chevy Volt will not need premium gas
Wed, Oct 29 2014Buried in the new technical details of the 2016 Chevy Volt released yesterday was a throwaway line about a small but important change that's due to the new 1.5-liter, four-cylinder engine. The first-gen Volt has always required premium gas but the new powerplant will be happy burning plain old regular. The Volt's chief engineer, Andrew Farah, told AutoblogGreen that the change was due to today's Volt owners explaining they were not happy paying for top-shelf petroleum. "The ability to use regular unleaded was based directly on customer feedback," he said. "Since the range extender is an all-new engine, it was optimized to use regular unleaded at the outset. Using regular fuel will not have effect on vehicle acceleration or other performance factors." As Larry Nitz, GM's executive director of vehicle electrification, told AutoblogGreen yesterday, the new engine is more powerful and quieter than the outgoing 1.4-liter engine that's used in the current Volt. Fuel economy and EV range specs for the next-gen Volt are not expected until the full car is revealed at the Detroit Auto Show in January.
Chevy's latest Silverado videos assume we're idiots
Mon, Jul 6 2015UPDATE: This article has been revised to reflect that any mention of materials used in a future Chevrolet Silverado is speculation. Can we have a sound, rational debate about the merits of aluminum versus steel? According to Chevrolet's latest marketing videos pitting the Silverado against the Ford F-150, the answer is no. The tone of all three ads is almost Orwellian: steel good, aluminum bad. Of course, this will all be a hilarious joke when an aluminum-bodied Silverado comes in 2018. That's an if, as a member of the General Motor public relations team has reminded me that any articles regarding future product are pure speculation. Until then Chevy needs to sell the current Silverado, with its body comprised chiefly of steel, against the Ford F-150's lightweight aluminum panels. Instead of touting the merits of the "most-dependable, longest lasting pickup," the strategy seems to center around negative propaganda towards the 13th element. The tone of all three ads is almost Orwellian: steel good, aluminum bad. Of the three videos, the most fair is Silverado vs. F-150 Repair Costs and Time: Howie Long Head to Head. Basically: aluminum costs more than steel, it's more difficult to repair, and requires special equipment for body shops. In terms of Chevy versus Ford, the blue oval truck costs more and takes longer to repair - an average of $1,755 more and 34 more days in the shop, according to the ad. But why stop there when you can have pitchman Howie Long raising an eyebrow at random facts? When Silverado Chief Engineer Eric Stanczak says of the Ford, "It's manufactured in a way that combines aluminum, rivets, and adhesive in a process that's different than Silverado." Long responds, "Huh. Interesting." At the end of the video, Long says "I'd be interested to know what happens to insurance costs." Note he's not saying anything substantive. If Chevy's legal team could sign off on some facts about insurance rates, it would be in this ad. On our Autoblog Cost to Own calculator, there is no significant difference in projected insurance costs between the two trucks. But at least that ad has facts. The other two videos are pure hype. In Cages: High Stength Steel, real people are asked what they think of aluminum and steel in a room with two cages. Then a bear is released into the room, and the subjects scurry to the safety of the steel cage.
Chevy Bolt officially keeping name, says marketing boss
Thu, Apr 16 2015There might be just a little confusion at first, but the Bolt name is sticking around. After conducting two consumer studies into the name, Chevrolet isn't worried about the similarity of the monikers for the upcoming EV and existing Volt plug-in hybrid. In fact, the brand thinks the resemblance might be for the best. "The decision is made. The name won't be changed." Chevy head of marketing Tim Mahoney said to The Detroit Free Press. The research shows that the compatibility between the two names actually works quite well. With the Volt well established, people apparently already connect the Bolt to the Bowtie, which is just what a brand wants. Both studies indicated the ""same result, it did well," according to Mahoney. Just a few months ago, the future of the Bolt's name wasn't so clear. GM North America President Alan Batey said the company knew there might be confusion, and it was still mulling its options. The Bolt could be a breakthrough in the EV market with a 200-mile range and a possible price of around $30,000 after incentives. Production is set for the Orion Assembly plant in Michigan following a $200 million upgrade there, and the model could be in dealers as soon as 2017. That's just in time to take on the Tesla Model 3 with its claimed $35,000 price and similar driving distance as the Chevy. Related Video:
