1981 Chevrolet Camaro Z28 Coupe 2-door 5.7l on 2040-cars

Auto blog

Chevy EN-V 2.0 coming to Tianjin Eco-City in China

Chevrolet is bringing its EN-V 2.0 to the Sino-Singapore Tianjin Eco-City in China to show off the "Electric Networked-Vehicle" and demonstrate sustainable urban mobility. The small, two-seat EV concept is an updated version of the original EN-V, a vision of getting around in a future world where space is at a premium and clean air is a priority. So what better place to showcase the evolved EN-V than at the Tianjin Eco-City? The Eco-City is being developed as a planned urban space with eco-consciousness built in. The joint venture between China and Singapore offers an alternative to country living and smog-filled cities. Tianjin Eco-City, slated to be completed by 2020, will be able to offer 350,000 inhabitants clean air and water, renewable energy, green transportation and living spaces and, if all goes as planned, jobs for 50 percent of the residents. Currently, only about three square kilometers of the planned 30 square kilometers have been built, with only about 6,000 permanent residents, but there's still time. The EN-V 2.0, as the "Networked" part of its name suggests, not only features mobile internet, but can communicate with other cars around it. Along with GPS and built-in sensors, this connection between vehicles allows the car to drive autonomously (at least in theory - again, there's still time). This is ideal in an urban environment where congestion can be a major issue. The EN-V 2.0 improves upon the original concept with climate control, storage space and all-weather capability, which also make life more bearable and daily commuting possible. We first saw renderings of the updated vehicle in 2012. The Chevrolet EN-V 2.0 will be used in the Eco-City's National Animation Industry Park and Eco-Business Park of the course of the two-week demonstration. Read on below for more in the press release from GM. GM to Demonstrate Chevrolet EN-V 2.0 in Tianjin Eco-City SHANGHAI – General Motors today announced that it will begin demonstrating the Chevrolet EN-V 2.0 (Electric Networked-Vehicle) in the Sino-Singapore Tianjin Eco-City this week, signaling the company's learning and progress in sustainable urban mobility. The demonstration will help GM further understand consumers' usage of low-speed transportation tools for their daily commute. During the two-week demonstration period, the EN-V 2.0s will be used in the National Animation Industry Park and Eco-Business Park inside the Sino-Singapore Tianjin Eco-City.

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video: