1968 Ss Caramo on 2040-cars

Auto blog

Chevrolet Malibu could last until 2024 before joining the dodo

Automotive News pieced together all available intel on the Chevrolet and GMC lineups, trying to ascertain how much life each model might have left. Concerning the Chevrolet Malibu, the answer is not too much, and the historic nameplate's final years don't look like the glory kind. After a major overhaul in 2016 boosted sales for the ninth-generation sedan to 227,881 units, the 2018 sales fell to 144,542, and this year's are down almost 15% through the end of June. The Malibu is one of two Chevrolet sedans still breathing - the other being the Impala for now - but only for about five more years. AN says there'll likely be a refresh in 2022, followed by a visit from the Reaper in 2024. After that, it could be "indirectly replaced" by an electric vehicle, one of the 23 EVs that GM is working on for 2023.     The Impala will meet the ax earlier despite a recent stay of execution. Production is still set to close in January 2020. In the entire GM stable, Cadillac might soon be the only marque with sedans. The Buick LaCrosse has a date with death, and Groupe PSA won't supply Opels-as-Regals forever.  The Sonic hatchback should say goodbye at the end of 2020, a year before the seemingly eternal Spark is thought to die. Two years after that, according to one report, the Camaro will go back into cold storage, perhaps forever, and AN says an "expected redesign of the car in 2021 was reportedly canceled." Finally, let's give one final shout-out to the Chevrolet Cruze, a global nameplate, which in the United States alone outsells the Malibu, outsold the Camaro by a factor of three last year, and absolutely trounces the Impala, Sonic, and Spark. Even that couldn't get a stay of execution. In more uplifting news, everything's happening on the crossover and truck side in the next few years. The Chevy Bolt is due for a refresh next year, even though it has "become more important for self-driving ride-hailing fleets that GM Cruise plans to operate than for consumers." In 2021, the Bolt-based crossover should bow, first in China, then here. It's said to look like "a mix of the Bolt and Trax" in spy shots. Still waiting for a green light: a possible subcompact GMC crossover called Granite that might make it to market by 2023. The full-sized SUV triplets Tahoe, Suburban, and Yukon could show their new faces in 2020. The Silverado might get an updated interior in 2020 or 2021, while the Colorado and Canyon mid-sized pickups won't get attention until perhaps 2023.

2016 Technology of the Year Finalist: 2016 Chevy Volt

The 2016 Chevy Volt is in all ways an improvement over the Volts that came before. It's got a new powertrain, a new look, and new (and better) fuel economy figures. What's not to like? For the second generation, GM used the last few years of automotive battery improvements and customer data to deliver a car that took what people liked about the first Volt and offered up more of that. This means a longer all-electric range (from 38 miles to 53) and better gas-burning fuel economy (37 miles per gallon up to 42 mpg – oh, and you're not required to use premium any more, either). All of this for less money than the outgoing 2015 Volts. Chevy's new plug-in hybrid will start at $33,995, which is not only lower than the 2015's MSRP of $34,170 but it's also just a few hundred dollars higher than the average new car price in the US. In other words, the new Volt (and many other plug-in vehicles) is not out of the price range for most car shoppers. The interior has been updated as well, losing some of the oh-so-futuristic touch-sensitive center stack in favor of more realistic tactile buttons. This along makes the new Volt better than the first generation, but when it's wrapped up in the new exterior design, it just feels more appropriate for a car that's not trying to be from the future. Instead, the new 2016 Chevy Volt wants to be the best plug-in car for right now.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.