1968 Chevy Camaro Z28 - Coupe - 454 - 475 Horsepower on 2040-cars

Auto blog

2017 Honda Ridgeline enters the landscape block war

In the test of pickup truck beds, if steel is apples and aluminum is oranges, Honda wants you to know that composites are pineapples. Chevy recently performed a test in which its own Silverado was pitted against its most obvious competitor, the Ford F-150. A loader dropped over 800 pounds of landscaping blocks into the two truck beds, and Ford's aluminum bed ended up with more damage than Chevy's steel bed. Check that test out right here. Honda apparently wasn't content to let Chevy throw stones alone. In a new test, the Japanese automaker replicated the block-drop test using its brand-new Ridgeline truck, which features a composite bed. As you'll see in the video above, there was very little damage to the high-strength plastic bed of the Ridgeline after a similar load of landscaping blocks were dropped from a loader. Without being on hand at any of these tests, we can't say with any degree of certainty that they match up in severity. But they all look pretty similar, and this is actually a test that Honda performed in front of journalists ( ourselves included) earlier this year. We visually inspected the composite bed of a Ridgeline after a demonstration just like the one on video above, and can confirm that there was basically no damage to Honda's truck. Chevy went an extra step by flinging a heavy toolbox into the Silverado and F-150; Honda didn't match that particular test. Does any of this matter? That's up to truck buyers and owners to decide, naturally, but we doubt anyone would actually dump a load like this into their own truck. And it's also worth noting that a heavy-duty spray-on bedliner would probably minimize damage to the metal surface below, whether steel or aluminum. If nothing else, it's memorable marketing. Related Video:

GM diesel pickups first to undergo extra EPA, CARB testing

The effects of Volkswagen's long-running diesel emissions evasion are starting to spill over to other automakers, but General Motors is taking things in stride. The 2.8-liter, four-cylinder Duramax in the 2016 Chevrolet Colorado and GMC Canyon is the first engine to get extra scrutiny by the Environmental Protection Agency and the California Air Resources Board, Automotive News reports. Rather than just the usual in-lab test, it's also being checked on the road. However, the extra evaluation shouldn't have any impact on when the trucks with his mill hit dealers later this fall. "We're in our final stages of the EPA certification, and our launch is on track," Chevy spokesperson Otie McKinley tells Autoblog. The four-cylinder diesel in the trucks makes 181 horsepower and 369 pound-feet of torque, and the automaker is touting low NOx production. In the announcement for the Colorado's specs, the company calls it "the cleanest diesel truck engine ever produced by General Motors." The tech includes exhaust gas recirculation to lower combustion temperatures and improve emissions. There's also a urea tank like on the bigger diesels for full-size trucks, and it gets refilled in time with oil changes. An indication on the instrument panel lets drivers know when that's needed, too. Even with the more demanding testing, the company doesn't seem too worried about the four-cylinder passing. "Part of our development process is on-road and off-road [laboratory] testing," Scott Yackley, Chevy Trucks assistant chief engineer, said to Automotive News. In the wake of the VW scandal, the EPA has pledged more rigorous testing. Before, on-road emissions evaluations were largely limited to heavy-duty vehicles, but the agency has decided to apply the checks more often to other models. There's also now greater cooperation with Canadian authorities.

2020 Chevrolet Tahoe, Suburban and GMC Yukon all spied with production lights

One of our spy photographers just caught a smattering of full-size GM SUVs out testing, including the Chevrolet Tahoe, Suburban and GMC Yukon. Previous spy photos of the next-generation of these big GM SUVs have revealed that GM is going with an independent rear suspension design, and these shots confirm the news once again with our best look at the hardware yet. Check them out from the rear, lined up like ducks in a row to see the beefy control arms down there. This will undoubtedly give the big SUVs a more compliant ride, and should bring it back into touch with the refinement from the Ford Expedition and Lincoln Navigator. The new bits we get to see with these shots are production headlights and taillights that are shaping up to look pretty neat. Most distinguishable are the GMC Yukon's LED DRLs. These look a lot like the C-shaped LEDs outlining the headlights on the Sierra, but they have an extra LED strip on top of the C. The parts of the taillights that we can see look significantly different than that found on the Sierra, showing GM is planning on having a great deal of differentiation there. We can sort of see through the mesh covering the grille to what appears to be a classic horizontal bar style front opening. Chevy is predictably dialing the crazy LED strip design back for the Tahoe and Suburban. The parts that are lit up look a whole lot like the headlight fixtures on the 2019 Silverado. That truck uses a stack of lights with the actual headlights separated from the DRLs. We can see the same thing going on here, with the headlight up top and curved LED DRL strip sitting below. It's tough to say if the designs are exactly alike, but we expect to see an extremely Silverado-esque look once all the camouflage comes off. Chevrolet's taillight design differs from its donor truck like the GMC, showing off a curved, vertical series of LEDs out back. Once production lights start popping up like this, we know the vehicle is moving closer to its end game. A reveal sometime later this year could be in the cards for GM's next batch of full-size SUVs. It certainly needs them quick, as Ford rockets ahead with increased Expedition production announced earlier this week.