2000 Chevy 2500 Wrecked on 2040-cars

Auto blog

CNG-powered Chevy Sonic, Cruze headed your way

The value proposition for a Crazy Diamond Performance CNG ride was a little bit better before gas prices took a dive in the past month. Still, the Michigan-based company, which converts some of Chevrolet's compact vehicles to run on compressed natural gas, received approval late last month from the US Environmental Protection Agency (EPA) for two of its conversion models. And CNG is still pretty cheap. Crazy Diamond will start selling CNG versions of both the Chevrolet Cruze and Chevrolet Sonic. The startup will target fleet operators looking to cut both refueling costs and their carbon footprint. CNG can be found in much of the country in the low $2 range, while the average CO2 emissions are about 25 percent less than those of similar gas-powered vehicles. Average gas prices have tumbled by more than 30 cents a gallon in the last month, according to AAA, but they're still at close to $3. The two models will be able to go almost 300 miles on a full tank of CNG. Crazy Diamond said this summer that it would start selling converted a CNG-powered Cruze that delivers 130 horsepower for as low as $26,000. The turbocharged version goes for about $28,000. Take a look at Crazy Diamond Performance's celebratory press release below. Crazy Diamond Performance recieves EPA approval on its CNG Cruze and Sonic CDP receives EPA approval for its Mono-Fuel CNG Cruze and Sonic. Shelby Township, Michigan, October 30, 2014– Crazy Diamond Performance (CDP) receives EPA approval on its Mono-Fuel Compressed Natural Gas (CNG) Chevrolet Cruze and Chevrolet Sonic. Crazy Diamond Performance has received EPA approval on two new mono-fuel small passenger vehicles, the CNG Chevrolet Cruze and CNG Chevrolet Sonic. These new mono-fuel CNG platforms are the first of a series of small and fuel efficient vehicles coming from CDP, where cost, low emissions and reduced fuel consumption is important for not only fleet owners, but to the general public as well. "Soon to be available, are the 1.8L and 1.4L Cruze and Sonic CNG retrofit systems. These two vehicles represent a change in the status quo, with an OEM level integration of the fuel system and its components" states Michelle Fern, Executive Vice President CDP Inc. These vehicles provide flexibility for fleets looking to purchase a domestic small mono-fuel passenger sedan, but have not had an option until now. There are significant emissions benefits over its gasoline counterpart, with an average reduction in Carbon Dioxide (CO2) of 25%.

Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]

With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.

Ringbrothers drops more hints about its wild SEMA creations

Ringbrothers isn't finished teasing its SEMA creations. First we got a sliver of rear quarter on a 1969 Chevrolet Camaro that revealed a bundle of carbon fiber and SEMA-obligatory deep-dish wheels. The Wisconsin tuner's now announced its litter of cars headed to the show and a few specs, along with two shadowy drawings. The Camaro, christened with the name Valkyrja and a two-tone paint job, gets stretched in two directions with severe fender flares to widen the body and an extended wheelbase. We're not sure what's happening with the Camaro's snout in the drawing, but under that bulging hood we'll find a 416-cubic-inch LS V8 from Wegner Motorsports. Wegner built the 416-cu-in supercharged LS3 V8 that powered Ringbrothers' 1,000-hp G-Code Camaro in 2016.  The second member of the gang is a 1969 Ford Mustang Mach 1 dubbed Unkl. The exterior begs for attention with a deep blue sea paint job, deep front chin spoiler, bulging hood, yellow brake calipers, and what looks like a racing number inside a roundel on the doors. Unkl gets its motivation from a 520-cu-in Boss V8 built by Kaase Racing Engines, rumored to throw about 800 hp.    Finally, Ringbrothers is bringing its Cadillac Madam V for another Las Vegas go-round after giving the custom coupe some updates. The Madam V is a 1948 Cadillac Series 62 fastback coupe body placed atop an ATS-V chassis, first shown in 2016. The firm didn't elaborate on the changes, so all we can expect for now are the coupe's postwar good looks mixed with new-millennium engineering, and a 3.6-liter twin-turbo V6 with 464 hp under that exceptionally long hood.    For any in attendance at the show, the Valkyrja Camaro debuts at the BASF booth on Tuesday, Nov. 5, 2019 at 9:30 a.m., the Unkl Mustang gets revealed a couple hours later at the Flowmaster/Holley booth, and the Madam V Cadillac will be on display throughout the show at the Ringbrothers booth.