1948 Chevrolet Factory Flatbed Truck *total Restored Truck* on 2040-cars
McLouth, Kansas, United States
|
1948 Chevrolet Factory Flatbed Truck!!!!! Total Restoration has been done to the truck!!!!!!! This truck runs good, drives great and has plenty of power building from the 235 Straight 6!!!!! Ready to show, shine or just flat out cruise~
Up for auction is this 1948 Chevrolet Factory Flat bed Truck! IT has been built from the ground up! Frame, brakes, engine compartment, transmission all of this is NEW AND THE TRUCK COMES WITH IT"S RECORDS!!!!! That's right all the receipt's from the restoration goes with the truck!!!! It has a built 235 Straight 6 with Mallory Ignition, Split Manifold with a 2 barrel Holley, Electric fuel pump and to pump the power to the rear wheels is a 4 speed manual transmission with a Granny Low!!!!! The interior is all new in the truck and is in great shape!!!! The truck is equipped with a nice aftermarket stereo that has been fitted into the dash properly and with a factory Chevrolet Spot light on the driver's side!!!! That's right it has a factory chevrolet tag still riveted on it! Please feel free to email or call with any concern's, questions or any additional photo's that you may need! 913-796-2221 Thanks and Good Luck Bidding!!!!! |
Chevrolet C/K Pickup 2500 for Sale
1989 chevrolet k2500 cheyenne automatic 2-door truck(US $5,600.00)
1976 chevy cheyenne 3/4 ton 4x4 350 automatic with snowplow(US $3,000.00)
1984 chevrolet silverado 3/4 ton 350 v8 turbo 400 power windows/locks
1971 chevtolet c20 4 wheel drive v-8 auto $8500(US $8,900.00)
2005 chev silverado ls 2500hd crew cab 4wd diesel(US $22,500.00)
Chevrolet c20 silverado 454 engine 454 big block rear a/c 3/4 ton
Auto Services in Kansas
World Wide Transmissions ★★★★★
Willems Auto Rebuilders ★★★★★
United Tire & Muffler ★★★★★
Stu Emmert`s Automotive Center ★★★★★
Stan`s Auto Service ★★★★★
St John Brake & Muffler ★★★★★
Auto blog
Artist imagines eerie world where cars have no wheels
Thu, 24 Jan 2013The wheel ranks right up there with the telescope and four-slice toaster in the pantheon of inventions that have moved humankind forward. But what if a circle in three dimensions had never occurred to anyone, and we all had just moved on without it? Perhaps we'd be driving around in Lucas Motors Landspeeders with anti-gravity engines. Or maybe we'd have the same cars we do today, just without wheels.
That's the thought experiment that seems to have led French photographer Renaud Marion to create his six-image series called Air Drive. The shots depict cars throughout many eras of motoring that look normal except for one thing: they have no wheels. The models used include a Jaguar XK120, Cadillac DeVille (shown above), Chevrolet El Camino and Camaro, and Mercedes-Benz SL and 300 roadsters.
Perhaps one day when our future becomes our past, you'll be able to walk the street and see with your own eyes the rust and patina of age on our nation's fleet of floating cars. Until then, Monsieur Marion's photographs will have to do.
GM plans to restart production in Mexico on May 20
Mon, May 18 2020MEXICO CITY — General Motors is tentatively planning to restart operations at its auto assembly plant in the Mexican city of Silao on May 20, according to a message to workers seen by Reuters on Sunday, as the car industry prepares to exit the coronavirus lockdown. Separately, the president of GM's Mexican unit advised suppliers to prepare to resume operations. “We are now beginning a new phase given the Mexican governmentÂ’s official announcement earlier this week to consider the transportation manufacturing industry as essential for the countryÂ’s economy,” Francisco Garza, president ofGeneral Motors de Mexico, wrote in an email to suppliers dated on Friday that was viewed by Reuters. The reopening of the plant in Silao would be a positive signal for the auto sector in North America, whose supply lines are highly interconnected between the United States, Mexico and Canada. The plant in the central state of Guanajuato has been idled for weeks due to the coronavirus outbreak. Workers had previously been told to plan to return to their jobs on May 18. A GM spokeswoman said the company could not confirm when it would restart operations at any of its facilities in Mexico because it is awaiting more guidance from the government. The message to the plant's workers came after the government on Friday clarified when the industry could begin easing restrictions imposed because of the health emergency. On Wednesday, the government said automakers could start going back into production from May 18. It then withdrew that advice and suggested the new start date would be June 1. Finally it indicated the sector, which forms the backbone of Mexican manufacturing, could begin operating as soon as next week if companies had the required safety measures in place. U.S. officials and its auto industry have pressed Mexico's government to get its factories open again because American operations depend heavily on parts from south of the border. However, some politicians are wary of opening too fast. Mexico registered its first case of coronavirus weeks after the United States and Canada and the toll of daily infections and deaths in the country reached new peaks over the past few days. The Silao production facility, which makes highly profitable pickup trucks for GM, is one of the biggest automotive plants in Guanajuato, a major Mexican carmaking state. Related Video:
Callaway debuts its new C7 Stingray at National Corvette Museum
Fri, 02 May 2014Callaway showed off its first tuned version of the 2014 Corvette Stingray at the National Corvette Museum last week, giving the rampant enthusiasts of America's sports car a look at the roughly 620-horsepower, supercharged rocket.
Unlike the Corvette SC610 we showed you back in January, this Stingray packs a fair bit more oomph. Horsepower is only up ten ponies, but torque has jumped from 556 pound-feet to "at least" 600 pound-feet. Neither horsepower nor torque is official quite yet, although Callaway is expecting to know just what its creation can do once testing and validation is completed later this month.
The 6.2-liter, supercharged V8 now boasts a new, three-element intercooler, which Callaway claims only allowed the inlet air temperature to increase by ten degrees Fahrenheit during dyno runs. Previous designs saw a 35-degree-Fahrenheit jump. The exhaust system has also been fettled with, and now is even less restrictive.























