Find or Sell Used Cars, Trucks, and SUVs in USA

Lowered Full Size Chevy Truck on 2040-cars

US $9,500.00
Year:1990 Mileage:225000
Location:

Sullivan, Missouri, United States

Sullivan, Missouri, United States
Advertising:

This truck has been redone to properly lower the trucks stance.  It's been professionally repainted   And the bed has been RINO lined for durability. It comes with a bed cover to further protect the bed.  The pics should show the condition wich is great paint looks brand new other than a few small paint chips or scraps.   The body work includes removing the tailgate latch and replacing it on the inside to give the gate a smooth look with aftermarket tail lights and even though you can't see it in the pics the lisc plate lowers and reveals a tow hitch.   The front body also has a smooth look as the pictures will show   The aftermarket hood finishes off this look.    Now for the important part.   This truck looks great and also runs fantastic. Pay attention to the engine pics and see the attention to detail that was used when rebuilding this 350 engine. Including the alternator and new air  And with all new duel exhaust  this truck runs great drives great. And very dependable.  Nice rims and tires look like they have a lot of tread left.     The interior hasn't been redone but looks great dash is in great shape and even has a dash cover that may explain why it's in such good shape.  The carpet is a little dirty and some minor trim cracks but all in all great shape.       If you tried to buy a truck like this and do the work on it to make it this truck you would expect to spend upwards of   $14,000 easy.  I need some equipment so have to sell. Of course I'm not going to sell this truck for 5 k but I'm willing to take far less of its value. This 350 is fast and will make a great daily driver for someone who wants to be noticed. I'm only selling in the United States and as is no warranty.    Buyer is responsible for all shipping or pick up cost.   Pick up in Sullivan mo. 

Auto Services in Missouri

Wyatt`s Garage ★★★★★

Auto Repair & Service, Brake Repair, Tire Changing Equipment
Address: 161 County Road 440, New-Franklin
Phone: (573) 698-2068

Woodlawn Tire & Auto Center ★★★★★

Auto Repair & Service, Tire Dealers
Address: 100 Chat Rd, French-Village
Phone: (573) 431-4300

West County Auto Body Repair ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Automobile Parts & Supplies
Address: Richwoods
Phone: (314) 993-4466

Tiger Towing ★★★★★

Auto Repair & Service, Towing, Locks & Locksmiths
Address: 414 Nebraska Ave, Columbia
Phone: (866) 595-6470

Straatmann Toyota ★★★★★

New Car Dealers, Used Car Dealers, Wholesale Used Car Dealers
Address: 1498 High St, Innsbrook
Phone: (636) 239-4775

Scott`s Auto Repair ★★★★★

Auto Repair & Service, Automobile Diagnostic Service, Automobile Inspection Stations & Services
Address: 903 N Truman Blvd, Crystal-City
Phone: (636) 933-3597

Auto blog

GM patent reveals new two-stage turbocharger

Fri, Jun 24 2016

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Franchitti, Kanaan, and Dixon prank young IndyCar driver

Fri, May 22 2015

The 20-year-old Sage Karam is a rising star in racing after scoring the 2013 Indy Lights Championship and taking ninth place in the 2014 Indianapolis 500. He's now competing for Chip Ganasi Racing, one of the top teams in the IndyCar Series, and counts this year's pole sitter Scott Dixon and former winner Tony Kanaan as teammates. Of course, being so young and a new member of the squad, some lighthearted hazing is to be expected. Dixon, Kanaan, and three-time Indy 500 winner Dario Franchitti decided to play a little prank on Karam. While ostensibly detailing his Chevrolet Camaro, the three joking racecar drivers turned it into the Karamo. Check out the video above to see exactly what that means. After some scary crashes going into this year's event, it's refreshing to watch some cheery things happening at Indy.

Cadillac CT6 production ceases January 2020 as part of D-Ham layoffs

Fri, Dec 6 2019

General Motors filed paperwork under the Worker Adjustment and Retraining Notification Act with Michigan's Department of Labor and Economic Opportunity this week, detailing events to come at the automaker's Detroit-Hamtramck Assembly Plant. Starting February 28, 814 salaried and hourly workers at D-Ham, as its called, will be laid off. The 753 workers represented by the UAW will begin receiving offers in January to relocate to facilities in Michigan and Ohio, or buyout offers. As the 4-million-square-foot plant winds down through April 3 to a skeleton crew, the Cadillac CT6 ceases production in January 2020, and the last Chevrolet Impala comes off the line on February 28. The loss of the CT6 represents the end of Cadillac's latest brief, and highly regarded, adventure into flagship sedans. It might also mean the end of the 4.2-liter Blackwing twin-turbo V8 engine, at least for the moment. Both casualties are calamities. The death of the Impala closes the door on a nameplate in production for 52 years since 1957, having started off as a top-tier trim for the 1958 Bel Air known as the Bel Air Impala, once advertised with the line, "Lets you know you're the boss." As part of the new four-year labor agreement with the UAW, GM is keeping D-Ham open to build a new line of battery-electric vehicles, ultimately investing $3 billion and tripling employment to 2,225 workers when fully operational. The agreement described the coming EV as a "van" that would commence production in late 2021, but various reports say what's actually coming is a range of premium EVs in pickup and SUV bodystyles under the program codename BT1. The easy predictions put an electric GMC Sierra and Cadillac Escalade among the EV fold, but not until 2023, according to auto industry forecaster LMC Automotive. Before that, LMC claims an electric van will debut in late 2021, along with a battery-powered rebirth of the Hummer brand in pickup and SUV forms, also in late 2021.Â