1993 Chevrolet 1/2 Ton Pickup V8 on 2040-cars

Auto blog

GM veteran Bryan Nesbitt tapped to head Buick design

General Motors styling veteran Bryan Nesbitt (pictured above) took over a new role on Monday as executive director of global Buick design and global architectures. Andrew Smith, who previously did that job and also coordinated the look for Cadillac, has remained in charge of the pen at Caddy with this shift. Nesbitt rose to prominence when he designed the Chrysler PT Cruiser, according to Automotive News. He joined GM in 2001 and has been there ever since in multiple high-level roles. In 2007, he was appointed vice president of design for North America and was later briefly general manager of Cadillac in 2009-2010. Nesbitt took over as the vice president of GM's international operations design in China in 2011. This shuffle also moves Ken Parkinson, currently styling boss for Chevrolet trucks, to China as design vice president there. In addition, John Cafaro becomes the person in charge of the look for Chevy globally, rather than previously splitting that role between cars and trucks with Parkinson. GM Global Design Leadership Changes – effective June 1, 2015. Bryan Nesbitt, Design Vice President, GM China will repatriate to North America and assume the position of Executive Director, Global Buick and Global Architectures. He will be located in Warren, MI. Bryan will be the design Champion for Buick in the US and China. Ken Parkinson, Executive Director, Global Chevrolet Trucks and Global Architecture will assume the position of Design Vice President, GM China. He will be based in Shanghai, China. Andrew Smith, Executive Director, Global Cadillac and Buick Design will assume the position of Executive Director, Global Cadillac. He will continue to be the design Champion for the Cadillac brand. In addition, he will continue to lead the Global Color & Trim team. He will be based in Warren, Michigan. John Cafaro, Executive Director, Global Chevrolet Cars will assume the position of Executive Director, Global Chevrolet. He will be the design Champion for Chevrolet. In addition, John will lead the exterior components and accessories team. He will continue to be based in Warren, MI. The roles and responsibilities of Helen Emsley, Mark Adams, Carlos Barba, Clay Dean, Michael Simcoe, and Teckla Rhoades remain the same. Related Video: The video meant to be presented here is no longer available. Sorry for the inconvenience.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

Weekly Recap: Volvo buys Polestar, makes performance a priority

Volvo is taking its performance business in-house, and the Swedish carmaker announced Tuesday that it bought tuning company Polestar, which has long been known for producing sporty Volvos. The move allows Volvo to ramp up its performance business, and it plans to increase Polestar-branded vehicle sales to 1,000 to 1,500 annually, up from the 750 total projected for this year. The companies have been working together on motorsports projects since 1996. Financial terms of the sale were not released, and Polestar workers will move over to Volvo. Former Polestar owner Christian Dahl will keep control of the Polestar racing team and operate it under a new name. In addition to sales volume, Volvo has ambitious plans for other parts of Polestar, including its aftermarket business. Volvo also said it will use its twin-engine hybrid technology for Polestar models in the future, though specifics and timing were not revealed. Meanwhile, Volvo announced it will offer a run of 265 total Polestars in the United States for the 2016 model year, with S60 and V60s available. "Driving a Volvo Polestar is a special experience. We have decided to bring this experience to more Volvo drivers, placing the full resources of Volvo behind the development of Polestar as the model name for our high performance cars," Volvo CEO Hakan Samuelsson said in a statement. OTHER NEWS & NOTES 2016 Chevy Silverado, GMC Sierra, get nose jobs Automakers tend to refer to light updates as 'facelifts,' and that's exactly what Chevy gave the 2016 Silverado and GMC Sierra. Chevy slightly changed the front end of the truck. Using the one photo released of the new Z71 model as a guide, we can see that the headlights went from a stacked vertical design to single bulbs, and they are set on top of LED running lights. The grille has more body-colored elements instead of shiny metal, and the hood has a new line running down the middle (look really closely). The design theme will be similar across the portfolio, though materials and details will vary, a spokesman said. Some models, like the High Country and LTZ will have more chrome, and the LEDs are only for the upper trims. Chevy also said it will use the eight-speed automatic transmission on more versions of the Silverado, and it updated the MyLink feature to support Android Auto and Apple CarPlay.