1972 4x4 Award Winning Complete Restoration Everything New Or Replaced 425hp on 2040-cars
New Braunfels, Texas, United States
Body Type:SUV
Vehicle Title:Clear
Engine:350
Fuel Type:Gasoline
For Sale By:Private Seller
Make: Chevrolet
Model: C/K Pickup 1500
Warranty: Vehicle does NOT have an existing warranty
Trim: SUBURBAN
Options: 4-Wheel Drive, CD Player
Drive Type: 4x4
Power Options: Air Conditioning
Mileage: 2,000
Exterior Color: Gray
Interior Color: Black
Number of Doors: 3
Number of Cylinders: 8
As you will see from the pictures everything has been replace or rebuilt. I bought this 3 years ago running from Houston tx. I had it media blasted then i began the work. A small section of the floor on both the driver and passenger side was replaced. The entire front clip is new including the hood. The paint is gunmetal grey (eleanore gone in 60 seconds) and black on the top. Engine is a year one crate motor 425hp. It has a frontrunner belt system and a be cool radiator. I did a disk brake swap on the rear and put wilwood calipers on the front. All hardware i put in was stainless steel. The exhaust is all hand made tig welded 2 into one 3.5. The transmission is a built 700r4 and the transfer case was also rebuilt as well. The tires are 33/14.50/20 Mickey Thompson and the wheels are 20x12 Fuel Octaine. It has a skyjacker lift of about 4in. I removed the blinkers from the front bumper and put in 8000 lumen lights tied to the high beam switch. The blinkers are now in the bottom of the headlights. Interior.... After it was removed i covered the interior with dynomat. Put in a new steering colume and replaces all the wiring with a painless kit. The stereo was wired with all the best wire and i also put a backup camera in the bumper (when you put it in reverse it pops up on the radio). The front doors have the one piece window kits installed. Both the front and rear air blow cold. All the black trim pieces you see were all powder coated flat black( bumpers and all iterior trim peices). The seats, arm rests, and ash trays are all new. The headliner and carpet is also new. I converted the factory dash to have a tach. Im sure I will miss a ton of stuff so feel free to call me Chip 8302372695 or email me. I am not asking for anywhere what i have in it i am just ready for a change.
Chevrolet C/K Pickup 1500 for Sale
1987 chevrolet custom deluxe 10.. 350 v8.. 57k miles.. a/c.. 1 nice truck ..
1991 chevrolet 454 ss custom california ready
1995 chevrolet k1500 silverado extended cab pickup 2-door 5.7l
1996 chevrolet k1500 silverado standard cab pickup 2-door 5.7l(US $3,000.00)
1998 chevrolet silverado c1500 ext cab 3door 5.0l very clean 89k no reserve
1974 chevy stepside truck
Auto Services in Texas
Yos Auto Repair ★★★★★
Yarubb Enterprise ★★★★★
WEW Auto Repair Inc ★★★★★
Welsh Collision Center ★★★★★
Ward`s Mobile Auto Repair ★★★★★
Walnut Automotive ★★★★★
Auto blog
Submit your questions for Autoblog Podcast #321 LIVE!
Tue, 19 Feb 2013We're set to record Autoblog Podcast #321 tonight, and you can drop us your questions and comments regarding the rest of the week's news via our Q&A module below. Subscribe to the Autoblog Podcast in iTunes if you haven't already done so, and if you want to take it all in live, tune in to our UStream (audio only) channel at 10:00 PM Eastern tonight.
Discussion Topics for Autoblog Podcast Episode #321
Unibody Ford Ranger replacement
Fernando Alonso fails to qualify as Pagenaud takes Indy pole
Mon, May 20 2019Former Formula One world champion Fernando Alonso narrowly failed to qualify for the Indianapolis 500 on Sunday as France's Simon Pagenaud took pole position for the May 26 race. Kyle Kaiser beat out Alonso for the final spot in the 33-car field when he finished third, one spot ahead of the Spaniard, in a six-car shootout that determined the Indy 500's last row. The 23-year-old Kaiser, the last driver to take the track, averaged 227.372 mph for his four laps, a mere 0.019 mph ahead of Alonso's 227.353 mph average in the McLaren-prepared Chevrolet. "We never surrendered. We kept trying," Alonso, 37, told reporters after a tough week at the famed speedway. The Spaniard crashed his Chevrolet in practice on Wednesday and missed nearly two full days of practice while a back-up car was prepared. Then he tried five times on Saturday to qualify, puncturing a tire on the first attempt. Alonso had a completely new set up for Sunday's shootout but could not get the speed he needed to qualify. "I think the car felt better today than what we had yesterday. (So I am) happy with things we tried," he told reporters before learning he had not qualified. Pagenaud had a four-lap average speed of 229.992 mph to become the first Frenchman to take the pole since Rene Thomas in 1919. "It's just amazing," Pagenaud, who last week won the IndyCar Grand Prix on the track's road course, told NBC Sports. "Obviously last week was amazing, but this is even more special." He will be joined by Ed Carpenter (229.889) and Spencer Pigot (229.826) on the front row. But the Cinderella story belonged to Kaiser, the 33rd qualifier. "I don't think I can wrap my mind around what we just did," he said after bumping Alonso from the field. "This is all the credit to the team. They've been working non-stop trying to get this car ready for us and they did everything that we needed to get into this field." (Reporting by Gene Cherry in Raleigh, North Carolina; Editing by Ken Ferris)Related Video: Motorsports Chevrolet McLaren Racing Vehicles F1 IndyCar
GM to invest $632 million in Indiana plant for future pickup truck production
Mon, Jun 12 2023General Motors plans to invest $632 million in its Fort Wayne, Indiana, assembly facility to prepare the plant for future internal combustion engine full-size light duty trucks, it said on Monday. The investment will be used to support new conveyors, tooling and equipment for the plant that manufactures GM's Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. GM has detailed more than $2.3 billion in planned investment in a series of announcements since last week as it works to retool existing North American auto plants and introduce more efficient next-generation internal-combustion full-size trucks and SUVs. Another investment announcement is planned later this week. The largest U.S. automaker is continuing to make big investments in gas-powered vehicles even as it vows to stop building them in 2035. Last week, GM said it was investing more than $500 million in its Arlington, Texas, assembly plant to prepare it for production of internal combustion engine full-size SUVs. GM faces increasingly stringent emissions requirements from California and the Environmental Protection Agency (EPA). Last week, GM also said it plans to invest more than $1 billion to re-tool two manufacturing sites in Flint, Michigan, to prepare for a new generation of its heavy-duty trucks. The Texas announcement highlights the company's commitment to continue "providing customers with a strong portfolio of (internal combustion) vehicles for years to come," GM said last week. On Tuesday, GM said it would invest C$280 million ($210 million) in its Canadian Oshawa Assembly to produce the next-generation internal combustion engine full-size trucks. GM paid $128.2 million in fines for failing to meet Corporate Average Fuel Economy (CAFE) program requirements for 2016 and 2017, records released recently show. The EPA in April proposed requiring a 56% reduction in projected fleet average emissions over 2026 requirements. (Reporting by David Sherpardson in Washington and Shivansh Tiwary in Bengaluru; Editing by Shilpi Majumdar and Conor Humphries) Plants/Manufacturing Chevrolet GM GMC




















